Chokes for a Stoeger 2000

Antique Shooter · August 14, 2010, 06:20 PM

I recently Purchased a Stoeger 2000, (I didn't shoot it yet), and got 5 chokes with it. 4 have stamped on the choke what they are, but 1 is black,(with the other 4 being silver). When I screw it into the barrel, about 1 inch sticks out. Is it the extra full, and is it susposed to stick out? Thanks, Antique Shooter

oneounceload · August 14, 2010, 06:43 PM

It should say what it is, length has nothing to do with it - it's just an extended choke tube that allows you to use your hands to screw and unscrew as opposed to using a wrench

Antique Shooter · August 14, 2010, 07:11 PM

It screwes in, but it doesn't go flush with the barrel, there's like a 1/8inch gap between the choke and actual barrel. Is that fine????

clemsonbloz · August 14, 2010, 07:32 PM

I have a set of custom seminole chokes for my browning gold,, and there is a small gap between the barrel and knurled part of the choke tube.. don't worry about that space, but keep a constant check on the choke tightness.. mine will loosen up after the barrel gets hot and cool over and over again.

Antique Shooter · August 14, 2010, 07:49 PM

Thanks Clemson

oneounceload · August 15, 2010, 09:36 AM

My Brileys that I have from my Brownings, Remington 1100, SKB, etc., are all extended and the knurled part you tighten with seats tight against the barrel. You might double check that the choke is seating flush against the skirt inside the barrel

noyes · August 15, 2010, 09:55 AM

Five choke tubes—from cylinder to extra-full turkey—come standard with the Stoeger Model 2000.

http://www.stoegerindustries.com/fir...model_2000.php

FAQs
http://www.stoegerindustries.com/support/faq.php

Antique Shooter · August 15, 2010, 03:14 PM

You can see on the above pic, that the black one has a darker ring around it, that is the part that is out, its not threaded, so I think it is susposed to be that way.

August 14, 2010, 06:20 PM	#1
Antique Shooter Senior Member Join Date: August 13, 2010 Location: South Central Pennsylvania Posts: 106	Chokes for a Stoeger 2000 I recently Purchased a Stoeger 2000, (I didn't shoot it yet), and got 5 chokes with it. 4 have stamped on the choke what they are, but 1 is black,(with the other 4 being silver). When I screw it into the barrel, about 1 inch sticks out. Is it the extra full, and is it susposed to stick out? Thanks, Antique Shooter

August 14, 2010, 06:43 PM	#2
oneounceload Junior member Join Date: April 18, 2008 Location: N. Central Florida Posts: 8,518	It should say what it is, length has nothing to do with it - it's just an extended choke tube that allows you to use your hands to screw and unscrew as opposed to using a wrench

August 14, 2010, 07:11 PM	#3
Antique Shooter Senior Member Join Date: August 13, 2010 Location: South Central Pennsylvania Posts: 106	It screwes in, but it doesn't go flush with the barrel, there's like a 1/8inch gap between the choke and actual barrel. Is that fine????

August 14, 2010, 07:32 PM	#4
clemsonbloz Member Join Date: June 3, 2010 Posts: 83	I have a set of custom seminole chokes for my browning gold,, and there is a small gap between the barrel and knurled part of the choke tube.. don't worry about that space, but keep a constant check on the choke tightness.. mine will loosen up after the barrel gets hot and cool over and over again.

August 14, 2010, 07:49 PM	#5
Antique Shooter Senior Member Join Date: August 13, 2010 Location: South Central Pennsylvania Posts: 106	Thanks Clemson

August 15, 2010, 09:36 AM	#6
oneounceload Junior member Join Date: April 18, 2008 Location: N. Central Florida Posts: 8,518	My Brileys that I have from my Brownings, Remington 1100, SKB, etc., are all extended and the knurled part you tighten with seats tight against the barrel. You might double check that the choke is seating flush against the skirt inside the barrel

August 15, 2010, 09:55 AM	#7
noyes Senior Member Join Date: December 27, 2008 Posts: 1,032	Five choke tubes—from cylinder to extra-full turkey—come standard with the Stoeger Model 2000. http://www.stoegerindustries.com/fir...model_2000.php FAQs http://www.stoegerindustries.com/support/faq.php

August 15, 2010, 03:14 PM	#8
Antique Shooter Senior Member Join Date: August 13, 2010 Location: South Central Pennsylvania Posts: 106	You can see on the above pic, that the black one has a darker ring around it, that is the part that is out, its not threaded, so I think it is susposed to be that way.