June 16, 2017, 12:20 AM | #1 |
Senior Member
Join Date: October 6, 2014
Posts: 730
|
Glock 23 question
Can you convert a 23 glock to a 10 mm. Ie is there a conversion barrel like you can with the 9mm conversion barrel
The model 23 is 40 cal |
June 16, 2017, 03:56 AM | #2 |
Senior Member
Join Date: July 1, 2001
Posts: 6,331
|
No. They keys to semi auto size are breechface and magazine. The g23 only fits a 10mm breechface and 40 length mag. You could convert to 9mm, but if Ben that is suspect.
|
June 16, 2017, 08:08 AM | #3 |
Senior Member
Join Date: November 17, 2009
Location: Back in a Non-Free State
Posts: 3,133
|
Over the counter conversion barrels exist for the following...
40S&W Glocks >> 357 Sig or 9x19mm 10mm Glocks >> 40S&W or 9x19mm (and 357 Sig if you hand ream the 9x19 chamber) 45 ACP Glocks >> 40S&W
__________________
Simple as ABC . . . Always Be Carrying |
June 16, 2017, 08:28 AM | #4 |
Senior Member
Join Date: October 31, 2000
Location: Texican!
Posts: 4,453
|
The real problem would be the .40 S&W works at 22,000 psi and the 10mm something like 35,000 psi.
Now the 10mm case, being thicker, you can cut it down to .40 length and then MAYBE load it a bit hotter while putting a heavier recoil spring in. But that would be a lot of effort to gain 50 fps or so. Deaf
__________________
“To you who call yourselves ‘men of peace,’ I say, you are not safe without men of action by your side” Thucydides |
June 16, 2017, 10:05 AM | #5 |
Senior Member
Join Date: October 6, 2014
Posts: 730
|
Thank you guys, now I understand. If I want a 10 mm glock just buy the model 40 I hear it's a great gun like all the other Glock's. Love their guns
|
June 16, 2017, 12:40 PM | #6 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,809
|
If you like the G23 consider a G29. They are about 1/8 thicker, but almost identical in other dimensions and will take the 15 round G20 magazines. There are also some hotter 40 S&W loads from Double Tap and Buffalo Bore that will match or beat a lot of 10mm loads.
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong" Winston Churchill |
June 16, 2017, 02:14 PM | #7 |
Senior Member
Join Date: October 31, 2000
Location: Texican!
Posts: 4,453
|
I agree with jmr40.
Glock 29 if you want a 10mm (but of course while I have a Colt Delta Elite 10mm one always needs another 10mm!) Deaf
__________________
“To you who call yourselves ‘men of peace,’ I say, you are not safe without men of action by your side” Thucydides |
June 25, 2017, 08:29 AM | #8 |
Member
Join Date: January 5, 2009
Posts: 76
|
Just buy some underwood ammo for the G23 and you will be happy.
Sent from my SAMSUNG-SM-G930A using Tapatalk |
June 25, 2017, 08:32 AM | #9 |
Senior Member
Join Date: March 3, 2012
Location: Texas
Posts: 970
|
|
June 25, 2017, 03:15 PM | #10 | |
Senior Member
Join Date: February 15, 1999
Location: Winston-Salem, NC USA
Posts: 6,348
|
Quote:
Glock makes a sub-compact 10mm -- the Glock 29 mentioned by jmr40 -- but not a 23-sized Compact in 10mm. The Glock 29 is a bit smaller in most ways than the 23, and has a shorter grip which holds that holds fewer rounds with a flush-fit magazine. Higher cap mags are available. Last edited by Walt Sherrill; June 25, 2017 at 06:22 PM. |
|
June 25, 2017, 03:35 PM | #11 |
Senior Member
Join Date: March 3, 2012
Location: Texas
Posts: 970
|
I have a G29. Sweet pistol and I have a 40sw, 9x25 Dillon and extended 10mm barrels for it.
|
June 26, 2017, 01:59 AM | #12 |
Senior Member
Join Date: October 6, 2014
Posts: 730
|
G29 sounds like my next buy thanks guys
|
|
|