The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old March 22, 2015, 06:02 AM   #6876
J A
Senior Member
 
Join Date: March 1, 2009
Location: The Hawkeye State
Posts: 191
imabmwnut

The 10-7 looks like a 1977 gun. I could not find the 3D prefix listed. But the 10-7 was a 1977 introduction. The 10-8 was also introduced in 1977. Just guessing as the SCSW book is not real clear. JA
J A is offline  
Old March 22, 2015, 07:38 AM   #6877
imabmwnut
Member
 
Join Date: February 15, 2013
Posts: 65
J A Thats what I noticed. It went from 2D to 4 D.
imabmwnut is offline  
Old March 22, 2015, 01:51 PM   #6878
J A
Senior Member
 
Join Date: March 1, 2009
Location: The Hawkeye State
Posts: 191
Did a little research on another forum.

The 10-7 and 10-8 were made and sold at the same time. The difference is one is a pencil barrel and the other is a heavy barrel. The -7 and -8 were apparently made between 1977 and 1988. I cold not find any dates for the D3 serial number. But here is the link that I found.
http://smith-wessonforum.com/s-w-rev...-question.html
I hope it helps. JA
J A is offline  
Old March 25, 2015, 12:22 AM   #6879
BingoFuel
Member
 
Join Date: July 25, 2013
Posts: 99
Hello,
I'm trying to learn more about the following S/N: RSR70xx
The model and SKU, year of manufacture, the dash-version, and any other pertinent info.
Thx,
B
BingoFuel is offline  
Old March 27, 2015, 03:12 PM   #6880
J A
Senior Member
 
Join Date: March 1, 2009
Location: The Hawkeye State
Posts: 191
BingoFuel

We need more information to identify your gun. We need the caliber and finish (blue or stainless). Then open the cylinder and you will see the model number and dash number is stamped on the frame.
With this info we should be able to give you a ship date and maybe other info. JA
J A is offline  
Old March 30, 2015, 10:43 PM   #6881
JSchreen
Junior Member
 
Join Date: March 30, 2015
Posts: 2
S&W .38spcl Airweight

I apologies if I break any rules, I'm new to this site. I have this SW .38 Airweight and we are trying to learn more about it. Serial# 289XXX there is no Alpha lettering on it associating with a serial number. Pearl/Ivory or plastic grips, I honestly don't know. I attempted to load photos but they exceed the size limit and I'm doing this from my phone.
JSchreen is offline  
Old March 30, 2015, 11:29 PM   #6882
JSchreen
Junior Member
 
Join Date: March 30, 2015
Posts: 2


JSchreen is offline  
Old April 4, 2015, 06:18 PM   #6883
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Serial# 289XXX
Looks like a model 37. Serial number dates it to 1962. The grips look like plastic but hard to be certain from a picture..


Jim
laytonj1 is offline  
Old April 5, 2015, 03:13 PM   #6884
elfranse
Junior Member
 
Join Date: April 4, 2015
Posts: 3
S&W 66-4

Hi. I have a revolver with the serialnumber is 74K6655 and wondering how old it is. Is it somebody who can help me?
elfranse is offline  
Old April 5, 2015, 08:40 PM   #6885
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
serialnumber is 74K6655
1980.
Serial numbers ran from 57K0001 to 91K6800 that year.

Jim
laytonj1 is offline  
Old April 5, 2015, 11:10 PM   #6886
elfranse
Junior Member
 
Join Date: April 4, 2015
Posts: 3
S&W 66-4

Seriously? The revolver looks really nice and i could not tell thats from 1980....
Thanks Jim
Attached Images
File Type: jpg bilde.JPG (135.1 KB, 16 views)

Last edited by elfranse; April 5, 2015 at 11:16 PM.
elfranse is offline  
Old April 6, 2015, 02:00 PM   #6887
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Seriously? The revolver looks really nice and i could not tell thats from 1980....
It has a pinned barrel which was dropped around 1982. So yeah, it's that old.
That said, it's a 66-1, not -4.

Jim
laytonj1 is offline  
Old April 6, 2015, 02:43 PM   #6888
elfranse
Junior Member
 
Join Date: April 4, 2015
Posts: 3
S&W 66-1

Of course its 66-1, thanks again Jim
elfranse is offline  
Old April 9, 2015, 04:04 PM   #6889
Fireman655
Junior Member
 
Join Date: April 9, 2015
Posts: 3
I traded for a S&W revolver last night and know almost nothing about revolvers so I'm hoping you all can tell me what I have. Model # 39742. S/N # 4134xx the revolver is nickel finish with swing cylinder S&W logo is on left side of pistol
Fireman655 is offline  
Old April 9, 2015, 04:50 PM   #6890
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Model # 39742. S/N # 4134xx the revolver is nickel finish with swing cylinder S&W logo is on left side of pistol
What caliber? It will be marked on the side of the barrel. I need the exact markings. Is it a 5 shot or 6?

Jim
laytonj1 is offline  
Old April 9, 2015, 04:56 PM   #6891
Fireman655
Junior Member
 
Join Date: April 9, 2015
Posts: 3
It's 6 shot 38 S&W special ctg on right side of barrel it also has a 5 inch barrel if that helps

Last edited by Fireman655; April 9, 2015 at 05:01 PM.
Fireman655 is offline  
Old April 9, 2015, 05:16 PM   #6892
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
It's 6 shot 38 S&W special ctg on right side of barrel it also has a 5 inch barrel if that helps
Sounds like a .38 Military & Police. Serial number 413xxx would put it in the mid 1920's.

Jim
laytonj1 is offline  
Old April 9, 2015, 05:21 PM   #6893
Fireman655
Junior Member
 
Join Date: April 9, 2015
Posts: 3
Thx man appreciate the help
Fireman655 is offline  
Old April 9, 2015, 08:59 PM   #6894
BShaver
Junior Member
 
Join Date: April 9, 2015
Posts: 3
Smith and Wesson "Lemon Squeezer" Information

Hello,
I am new here and was hoping I could get a little information on a gun that I received. I do not have a Smith and Wesson book like everyone is referring to in the forum. I was wondering if someone could provide me the year it was produced, what the gun was typically used for (police, military, civilian, etc.) and the make and model. Thank you all so much in advance, and I hope to hear from someone soon.

Gun: Smith and Wesson "Lemon Squeezer"
Caliber: .38 S&W Short
Serial Number: 117XXX

Last edited by BShaver; April 9, 2015 at 09:10 PM.
BShaver is offline  
Old April 11, 2015, 02:11 PM   #6895
glockman19
Senior Member
 
Join Date: May 30, 2007
Posts: 235
686-4

Jim,

Could you please tell me the of a 686-4 #BRS6125

My best guess is 1995 between August and October...am I correct?


Thank you
glockman19 is offline  
Old April 12, 2015, 09:11 PM   #6896
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Gun: Smith and Wesson "Lemon Squeezer"
Caliber: .38 S&W Short
Serial Number: 117XXX
Sounds like a .38 Safety Hammerless 4th Model.
Serial numbers ran from 116003 in 1898 to 220000 in 1907.
These were commercially offered guns.
The chambering is .38 S&W.

Quote:
Could you please tell me the of a 686-4 #BRS6125
My best guess is 1995 between August and October...am I correct?
That's a better guess than I can give you. Book shows prefix BRF to CAM running from August 1994 to Jan 1996.

Jim
laytonj1 is offline  
Old April 13, 2015, 02:38 PM   #6897
timgd
Member
 
Join Date: July 14, 2008
Location: SF bay area
Posts: 85
s&w age

Looking for DOB for a .32 regulation police sn3679xx s
Thanks
timgd is offline  
Old April 14, 2015, 04:56 PM   #6898
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Looking for DOB for a .32 regulation police sn3679xx
Early 1920's.

Jim
laytonj1 is offline  
Old April 15, 2015, 12:42 AM   #6899
timgd
Member
 
Join Date: July 14, 2008
Location: SF bay area
Posts: 85
DOB

Thanks, a little older than I thought.
Tim
timgd is offline  
Old April 21, 2015, 10:09 PM   #6900
Suncoast
Junior Member
 
Join Date: February 6, 2009
Posts: 1
Evening all

I have a S&W M&P 38. Round butt with hard rubber grips. 5" barrel and fixed sights

Serial Number is 5799XX

I have the Standard Catalog on order butt Books a Million is taking their time.

A DOB would be much appreciated
Suncoast is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 2.08595 seconds with 9 queries