The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old February 12, 2010, 02:57 AM   #2576
kerby
Member
 
Join Date: January 28, 2009
Location: las vegas
Posts: 20
22 revolver

I want to thank everyone that has helped find S&W info. I did a search before making my post. I think I have come close but we will try here. This is what I just got from my aunt after my uncle passed. Older 22, barrel stamped 22 Smith & Wesson CTG, ser 228xx, 7 shots, wood grips. If I can get some info on this I would appreciate.

Thanks in advance,
kerby
kerby is offline  
Old February 12, 2010, 07:42 AM   #2577
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
Older 22, barrel stamped 22 Smith & Wesson CTG, ser 228xx, 7 shots, wood grips.
Wow. Sounds like a .22 Ladysmith, 3rd Model. Made from 1911 to 1921 on the "M" frame, the smallest frame used for S&W hand ejectors, with only a bit over 12,000 manufactured. Depending on configuration (barrel length, etc.) and condition, could be worth some serious change. Chambered for .22 Long, but SCSW says it should not be fired with modern ammo.
FlyFish is offline  
Old February 13, 2010, 11:46 AM   #2578
dkish
Junior Member
 
Join Date: February 13, 2010
Posts: 1
could you give me a date and any info on my fathers 38? serial # 9635xx. there is an s in front of the number on the butt about a half inch away. there is an H stamp on the frame with the cylinder swung out. my father was a guard at a german officers pow camp in Boston during WW2. and a guard for republic steel after that.
thank you in advance!
Dave
dkish is offline  
Old February 13, 2010, 12:22 PM   #2579
TinyDee
Senior Member
 
Join Date: February 27, 2009
Location: Tennessee
Posts: 351
I have an unfired Model 34 that is N82xxx. Assume a 69 or 70?
TinyDee is offline  
Old February 13, 2010, 09:42 PM   #2580
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
could you give me a date and any info on my fathers 38? serial # 9635xx. there is an s in front of the number on the butt about a half inch away.
S9635XX makes it a 38 Military & Police postwar. Serial numbers ran from S811120 in 1945 to S999999 in 1948.

Quote:
I have an unfired Model 34 that is N82xxx. Assume a 69 or 70?
Model 34's do not have a "N" serial prefix. Take the serial number from the underside of the frames grip butt. There will be either no prefix or a "M" prefix.

Jim
laytonj1 is offline  
Old February 14, 2010, 10:53 PM   #2581
KClark
Junior Member
 
Join Date: February 10, 2010
Posts: 1
Model 41

Can you give me the date for a Model 41 # TAHXXXX

Thanks.

ETA: Thanks JIM!

Last edited by KClark; February 14, 2010 at 11:31 PM.
KClark is offline  
Old February 14, 2010, 11:03 PM   #2582
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Can you give me the date for a Model 41 # TAH18XX
1985.

Jim
laytonj1 is offline  
Old February 15, 2010, 11:45 AM   #2583
Puntmefar
Senior Member
 
Join Date: February 15, 2010
Location: Louisville Ky.
Posts: 137
i have a S&W .32-20 i caled their historian and got a ton of info inclusing manufacture date and how many were made while in production call them at 800-331-0852 ext 3223 they will ask u the modle and serial and tell u all about ur gun age,quantity, years in production and even recomend a safe ammo to use if the original ammo is hard to find i found out mine was made in 1923 personally
Puntmefar is offline  
Old February 15, 2010, 01:20 PM   #2584
my01truck
Junior Member
 
Join Date: February 15, 2010
Posts: 3
S&W Model 57+1

[I] have a S&W Model 57+1 41 Magnum, serial number BAR3897, and would like to know its birth history. It is stamped Springfield, Mass. on the right side of the frame, but it is not on the actual BBL as Smith & Wesson suggests it should be. It also is stamped "MARCAS REGISTRADAS" in the same location. It says "MADE IN USA", but I didn't know they spoke Spanish in Springfield, Mass. Is it really a Smith & Wesson, or just a copy?
my01truck is offline  
Old February 15, 2010, 02:04 PM   #2585
amandap
Junior Member
 
Join Date: February 15, 2010
Posts: 1
I need the date of a S & W hand gun

I have a 38 special Smith and Wesson Model # is E59-2xxx If you can help me with this info and do you know how we can get the history on this gun. Thanks in advance.
amandap is offline  
Old February 15, 2010, 02:34 PM   #2586
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
I have a 38 special Smith and Wesson Model # is E59-2xxx . . .
That's not a valid S&W serial number. Take the number off the butt of the gun (i.e., the bottom of the frame where the grips are attached) - it may be necessary to remove the grips to see it. Be sure to include any letter(s) that the number may start with.
FlyFish is offline  
Old February 15, 2010, 02:45 PM   #2587
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
[I] have a S&W Model 57+1 41 Magnum, serial number BAR3897, and would like to know its birth history. It is stamped Springfield, Mass. on the right side of the frame, but it is not on the actual BBL as Smith & Wesson suggests it should be. It also is stamped "MARCAS REGISTRADAS" in the same location. It says "MADE IN USA", but I didn't know they spoke Spanish in Springfield, Mass. Is it really a Smith & Wesson, or just a copy?
No, that sounds like a genuine Model 57, in this case dating from 1988. It should have the caliber stamped on the right side of the barrel and Smith & Wesson" on the left side. "Springfield, Mass." should only appear on the right side of the frame, not on the barrel.

I forget the whole story on the "MARCAS REGISTRADAS" thing, but it had something to do with S&W reacting to a flood of forgeries from one or more Spanish-speaking countries appearing on the market many years ago.

BTW, I live not too far away from the Mothership and visit the factory, range, and retail store in Springfield from time to time. There's probably about as much Spanish spoken in that area as there is English!
FlyFish is offline  
Old February 15, 2010, 04:31 PM   #2588
my01truck
Junior Member
 
Join Date: February 15, 2010
Posts: 3
Not a S&W serial number

That's what I thought, the same number is on the butt of the gun. Thanks. I got a little worried when the serial number did not start with an "N" or an "S" though. I couldn't find any series of serial numbers that started with "BAR".
my01truck is offline  
Old February 15, 2010, 05:12 PM   #2589
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
I couldn't find any series of serial numbers that started with "BAR".
S&W started using the three-character letter prefix (starting with "AAA") on revolver serial numbers in 1980.
FlyFish is offline  
Old February 16, 2010, 08:27 PM   #2590
vthokie83
Junior Member
 
Join Date: February 16, 2010
Posts: 2
Manufacturing date of S&W Model 65-5

I have just purchased a S&W Model 65-5. 3 inch, brushed steel, 6 shot .357 at a gun show.
I cannot tell the manufacture date from the S&W Standard Catalogue. The SN is 8SL98XX. Anyone know how I can find the manufacture date?
Thanks in advance.
vthokie83 is offline  
Old February 17, 2010, 12:33 AM   #2591
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
The SN is 8SL98XX
The first number (8) is not correct. It's likely a "B". 65-5 production was during the 3 letter prefix serial numbers.

Jim
laytonj1 is offline  
Old February 17, 2010, 02:04 AM   #2592
Charles1968
Junior Member
 
Join Date: February 17, 2010
Posts: 1
S&W Model 29-2

I have (2) S&W Model 29-2, the serial numbers are:

N738575

N754219

I would really appreciate any help with the year(s) the guns were manufactured.

Thank you,

Charles
Charles1968 is offline  
Old February 17, 2010, 02:15 AM   #2593
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I have (2) S&W Model 29-2, the serial numbers are:

N738575

N754219
Both are 1980.

Jim
laytonj1 is offline  
Old February 17, 2010, 08:52 PM   #2594
vthokie83
Junior Member
 
Join Date: February 16, 2010
Posts: 2
S&W Model 65-5

OK so the serial number under the grips looks like it starts w 8 but the cradle looks like it starts w B and I still cannot locate the manufacture year in the Standard catalogue for a S&W Model 65-5. 3 inch, brushed steel, 6 shot .357 w SN BSL98XX. Anyone know how I can find the manufacture date?
Thanks in advance.
vthokie83 is offline  
Old February 17, 2010, 09:06 PM   #2595
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
S&W Model 65-5. 3 inch, brushed steel, 6 shot .357 w SN BSL98XX. Anyone know how I can find the manufacture date?
1994/95.

They don't list all the individual numbers/prefixes. You have to interpolate.
BSL falls after BRF in Aug 94 and before CAM in Jan 96.

Jim
laytonj1 is offline  
Old February 19, 2010, 01:56 PM   #2596
psyfly
Senior Member
 
Join Date: April 27, 2007
Location: Texas
Posts: 932
Top-break nickel-plated .38 S&W DAO w/lemon-squeezer grip.

Model number unknown.

Ser. #: 100xxx

Many thanks for your help now and in the past.

Will
psyfly is offline  
Old February 19, 2010, 02:37 PM   #2597
av8r64
Junior Member
 
Join Date: February 19, 2010
Location: Oak Hills Ca.
Posts: 5
Old s&w? "I GOTS TO KNOW"

Hey guys im going to order the S&W book but like the dude in Dirty Harry says "I GOTS TO KNOW " so could you please let me know about my serial #517xxx thanks a bunch in advance you guys are alot of help.av8r64
av8r64 is offline  
Old February 19, 2010, 03:34 PM   #2598
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Quote:
. . . could you please let me know about my serial #517xxx . . .
Several of us would be more than happy to help, but we need more information because S&W used the same serial number series, and in some cases the exact same numbers, for different models. So . . . top break or swing-out cylinder, number of chambers in the cylinder, caliber, fixed or adjustable sights, and barrel length would all be good. Posting a photo, if you can, would be best.
FlyFish is offline  
Old February 19, 2010, 04:20 PM   #2599
psyfly
Senior Member
 
Join Date: April 27, 2007
Location: Texas
Posts: 932
Thanks, FlyFish.

I will post a pic tonight.

Will
psyfly is offline  
Old February 19, 2010, 05:13 PM   #2600
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,730
Will - I was actually responding to av8r64. I think you've given us enough information to identify your gun as a .38 Safety Hammerless 3rd Model, manufactured from 1890 to 1898, with about 73,500 produced. (Still like to see a photo if you can post one.)
FlyFish is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.43748 seconds with 9 queries