Winchester Model 1895 in 30-06

cuate · April 3, 2005, 05:15 PM

I have my Dad's Win. Mod. 1895 in '06 which was his deer hunter in the 30's. I wasn't sucessful in finding a schematic parts breakdown nor the sear bar screw bar screw that was missing that caused the hammer to not stay back nor go into half cock.

If anyone can help it would be appreciated very much! I found a 4-40 screw that works (a phillester heat, cad plated 3/8 aircraft screw that I turned the head to .188") But it isn't original and it isn't Winchester.

If I have posted in the wrong place, I apologize.

Lion In Winter · April 3, 2005, 08:36 PM

Try "Numrich Gun Parts" on the web.

Steven Mace · April 4, 2005, 06:37 AM

Cuate, try visiting the link below:

http://www.rarewinchesters.com/image...ded%20View.jpg

Steve Mace

cuate · April 4, 2005, 10:35 AM

Thank you Steve Mace, The schematic is great and my erronious names for the part and screw are clear.

Sear Spring & Sear Spring Screw.

Thank you Lion in Winter, will look and see if Numrich has anything.

Lion In Winter · April 4, 2005, 12:51 PM

If they don't, an INTERNET search will show you some part suppliers

April 3, 2005, 05:15 PM	#1
cuate Junior member Join Date: February 18, 2005 Location: Comanche Co. Texas Posts: 737	Winchester Model 1895 in 30-06 I have my Dad's Win. Mod. 1895 in '06 which was his deer hunter in the 30's. I wasn't sucessful in finding a schematic parts breakdown nor the sear bar screw bar screw that was missing that caused the hammer to not stay back nor go into half cock. If anyone can help it would be appreciated very much! I found a 4-40 screw that works (a phillester heat, cad plated 3/8 aircraft screw that I turned the head to .188") But it isn't original and it isn't Winchester. If I have posted in the wrong place, I apologize.

April 4, 2005, 06:37 AM	#3
Steven Mace Senior Member Join Date: November 15, 1999 Location: Clifton, Colorado USA Posts: 724	Cuate, try visiting the link below: http://www.rarewinchesters.com/image...ded%20View.jpg Steve Mace __________________ After today, its all historical

April 4, 2005, 10:35 AM	#4
cuate Junior member Join Date: February 18, 2005 Location: Comanche Co. Texas Posts: 737	1895 Winchester Thank you Steve Mace, The schematic is great and my erronious names for the part and screw are clear. Sear Spring & Sear Spring Screw. Thank you Lion in Winter, will look and see if Numrich has anything.

April 3, 2005, 08:36 PM	#2
Lion In Winter Member Join Date: January 22, 2005 Posts: 67	Try "Numrich Gun Parts" on the web.

April 4, 2005, 12:51 PM	#5
Lion In Winter Member Join Date: January 22, 2005 Posts: 67	If they don't, an INTERNET search will show you some part suppliers