In need of Remington Nylon 66 Disassemble & Reassemble Help! - Page 2

Harley Nolden · July 10, 2005, 02:40 PM

sent by separate email

HJN

Squirrel · August 4, 2005, 04:38 PM

Is there a step by step disassembly/assembly instruction? I'm in a some trouble.

I need to have this ready in two days... I'm gonna get it.

goresearch · October 10, 2005, 09:23 PM

Would very much appreciate Dissamble/Reassemble instructions.

Thanks in advance

[email protected]

AuTiger2005 · October 25, 2005, 05:49 PM

I need the step by step disassembly/assembly instruction too. I thoght I could figure anything out but I have now been humbled....
Thanks,
AuTiger2005

RookieRimfire · November 6, 2005, 03:04 PM

I found this thread while doing a search for "Remington Nylon 66 disassembly instructions"....Thank God!

Could I get a copy of those disassembly instructions also:

[email protected]

Thanks in advance.

smeagols · November 17, 2005, 07:21 PM

would also appreciate instructions thanks
email:[email protected]

Harley Nolden · November 18, 2005, 10:24 AM

Unable to email through TFL

Send me your email addy and I can reply through yahoo

[email protected]

HJN

Pharmr · November 19, 2005, 04:09 PM

Harley...I just wanted to say thanks for sending the instructions...they are exactly what I was looking for and you are a great resource!!!...thanks again.

JRH

healy4au · December 19, 2005, 03:19 PM

I tried to take my granny's old Nylon 66 apart to clean and could only get the barrel off. Please send the dissassembly instructions to [email protected].

Thanks in advance!

Swan Hunter · December 19, 2005, 09:17 PM

Yep, I need the instructions also...I have one that is firing about 3 full auto and then jamming! Not cool....at least not predictable! I was afraid to jump into the beast. Are there still parts for these anywhere?

Thanks A LOT!

[email protected]

mikesmith1115 · December 28, 2005, 12:14 PM

Hi,

I have just been given a Remington 66 and would appreciate any instrcutions for it.

Thanks in advance,

[email protected]

lilmomma · January 3, 2006, 03:57 PM

Need to know how to get my apache 77 apart and then back together to clean. Please someone email me and tell me how to get it apart. [email protected] Thank you so much, I have little time to get this done before my son's birthday and its one of his presents so as soon as you can get me an answer would be great. Thank you thank you!!!

jfboard · January 18, 2006, 07:55 PM

Could you send those instructions for nylon 66 to [email protected]

Nain · January 30, 2006, 10:51 PM

A coworker gave me a nylon 66 in parts to put back together for him. I was able to get most of it together until I got to the cartridge stop spring??? I have tried a few ways of putting it together but it still won't work properly. Can anyone help? Thanks in advance.

Scott

Cunfuzed1 · February 2, 2006, 07:00 PM

I need the step by step disassembly/assembly instruction too. Also can I use my nylon 77 receiver cover on my nylon 66 frame?

ivanx · March 3, 2006, 04:14 PM

Bought the 66 in `82 and have put more rounds through it than there are to fire. Unfortunately, this year the action started to get a bit sticky, so I decided to clean out the carbon. I have the original schematic so I thought, 'what could go wrong?'. Would like some particular instruction as to safe removal of bolt handle and proper reseating of barrel.

I've used this weapon so long that it seems to point itself, sure hate to have to continue using the Ruger 10/22 (too heavy/box clips...).

Please send disassembly/reassembly instructions (much appreciation).

[email protected]

flyker · March 4, 2006, 08:23 PM

Along about for my 21st birthday, my best friend gave me a new Remington Nylon 66 . Seemed like a nice enough rifle, at the time, but it never quite learned to chamber the next round.

Thought it might get over that, but 'Ve always had to eject an unspent shell, in order to chamber the one behind it.

Noticed that you've been able to help the fellers before me and would sure appreciate similar info. Guess it's about time to get real familiar with an otherwise darned comfortable rifle.

My friend and I still keep in touch on a regular basis. It'd be nice to call and tell him I'd fixed the thing (he gets all soft and mushy over stuff like that). Thank you, in advance, kind sir.

[email protected]

ivanx · March 18, 2006, 08:03 PM

Mr. Nolden, many thanks. Have now passed my own test (performed fourth disassembly/reassembly from memory). Will only put Yellow Jackets through this rifle from now on, had been using off-brand for the past year.
I was surprised that, although there was enough carbon build up to keep me permanently restricted to Post, this 24yr. old - never been cleaned - constantly used weapon is essentially in perfect condition (didn't even have to readjust the aim).

Will be recommending this site and your forum to fellow gun owners.

Keep up the good work!

ride-a-aug · March 18, 2006, 09:55 PM

If possible please send me instructions for the nylon 66 , like everyone esle
I too failed the disassembly test. Send to [email protected]
Thanks in advance.

Swan Hunter · March 19, 2006, 04:34 PM

Would very much appreciate Dissamble/Reassemble instructions.

Thanks in advance

[email protected]

chuck c · March 21, 2006, 04:03 PM

Just got a Remington nylon 66 from my father in-law.I would appreciate the assemble/disassemble instructions. Thank you in advance! Hope it makes it past the network stuff.

GUNSMOKE45441 · March 23, 2006, 08:49 AM

A friend brought me one with the parts in a baggy, luckily I had an old NRA book that covered it. what a nightmare!!

finns · March 28, 2006, 09:56 PM

I have a 10C and a Rem 66 and would like to take them down and clean them but haven't out of fear of not being able to get them back together. Could someone please send me the info. [email protected]
Thanks!

onebohemian · April 19, 2006, 08:58 PM

Harley (or one of you guys that have already gotten them), please send me a copy of those disassembly/reassembly instructions too. Stumbled upon a Seneca Green 66 today at a pawn shop and couldn't let it pass me by. Probably paid a little more than she's worth at the moment as she needs some tender loving care. Gun is all together and shop owner guaranteed it (for what that's worth). Figured it would be a worthy cause to finally give this one a home that she can feel safe in. With those instructions and some quality time, I should have her back in top shape before even I know it.

Ten-fold thanks in advance to Harley and the crew.

Mark

Harley Nolden · April 20, 2006, 01:58 PM

onebohemian:

Instructions sent by separate email

HJN

August 4, 2005, 04:38 PM	#27
Squirrel Junior Member Join Date: August 4, 2005 Posts: 1	This rifle. Is there a step by step disassembly/assembly instruction? I'm in a some trouble. I need to have this ready in two days... I'm gonna get it.

October 10, 2005, 09:23 PM	#28
goresearch Junior Member Join Date: October 10, 2005 Location: Wisconsin Posts: 5	Would very much appreciate Dissamble/Reassemble instructions Would very much appreciate Dissamble/Reassemble instructions. Thanks in advance [email protected]

October 25, 2005, 05:49 PM	#29
AuTiger2005 Junior Member Join Date: October 25, 2005 Posts: 1	I'm stuck too!!! I need the step by step disassembly/assembly instruction too. I thoght I could figure anything out but I have now been humbled.... Thanks, AuTiger2005

November 6, 2005, 03:04 PM	#30
RookieRimfire Junior Member Join Date: November 6, 2005 Posts: 1	I'm in need also... I found this thread while doing a search for "Remington Nylon 66 disassembly instructions"....Thank God! Could I get a copy of those disassembly instructions also: [email protected] Thanks in advance.

December 19, 2005, 03:19 PM	#34
healy4au Junior Member Join Date: December 19, 2005 Posts: 1	Help me out too! I tried to take my granny's old Nylon 66 apart to clean and could only get the barrel off. Please send the dissassembly instructions to [email protected]. Thanks in advance!

July 10, 2005, 02:40 PM	#26
Harley Nolden Staff In Memoriam Join Date: January 8, 1999 Location: Brunswick,GA USA Posts: 1,884	sent by separate email HJN

November 17, 2005, 07:21 PM	#31
smeagols Junior Member Join Date: November 13, 2005 Posts: 4	would also appreciate instructions thanks email:[email protected]

November 18, 2005, 10:24 AM	#32
Harley Nolden Staff In Memoriam Join Date: January 8, 1999 Location: Brunswick,GA USA Posts: 1,884	Unable to email through TFL Send me your email addy and I can reply through yahoo [email protected] HJN

November 19, 2005, 04:09 PM	#33
Pharmr Junior Member Join Date: November 18, 2005 Posts: 1	Harley...I just wanted to say thanks for sending the instructions...they are exactly what I was looking for and you are a great resource!!!...thanks again. JRH

December 19, 2005, 09:17 PM	#35
Swan Hunter Member Join Date: February 26, 2005 Posts: 46	Remington Nylon 66 Yep, I need the instructions also...I have one that is firing about 3 full auto and then jamming! Not cool....at least not predictable! I was afraid to jump into the beast. Are there still parts for these anywhere? Thanks A LOT! [email protected] __________________ If I had known having parents would have been this much trouble, I wouldn't have had any!

December 28, 2005, 12:14 PM	#36
mikesmith1115 Junior Member Join Date: December 28, 2005 Location: Las Vegas Posts: 3	Instructions for Remington Nylon 66 Hi, I have just been given a Remington 66 and would appreciate any instrcutions for it. Thanks in advance, [email protected]

January 3, 2006, 03:57 PM	#37
lilmomma Junior Member Join Date: January 3, 2006 Posts: 1	appache 77 disassemble reassemle Need to know how to get my apache 77 apart and then back together to clean. Please someone email me and tell me how to get it apart. [email protected] Thank you so much, I have little time to get this done before my son's birthday and its one of his presents so as soon as you can get me an answer would be great. Thank you thank you!!!

January 18, 2006, 07:55 PM	#38
jfboard Junior Member Join Date: January 18, 2006 Posts: 1	Harley could you send instructions Could you send those instructions for nylon 66 to [email protected]

January 30, 2006, 10:51 PM	#39
Nain Junior Member Join Date: January 30, 2006 Posts: 1	Nylon 66 help A coworker gave me a nylon 66 in parts to put back together for him. I was able to get most of it together until I got to the cartridge stop spring??? I have tried a few ways of putting it together but it still won't work properly. Can anyone help? Thanks in advance. Scott

February 2, 2006, 07:00 PM	#40
Cunfuzed1 Junior Member Join Date: February 2, 2006 Posts: 6	Same same many times I need the step by step disassembly/assembly instruction too. Also can I use my nylon 77 receiver cover on my nylon 66 frame?

March 3, 2006, 04:14 PM	#41
ivanx Junior Member Join Date: March 3, 2006 Posts: 2	Bought the 66 in `82 and have put more rounds through it than there are to fire. Unfortunately, this year the action started to get a bit sticky, so I decided to clean out the carbon. I have the original schematic so I thought, 'what could go wrong?'. Would like some particular instruction as to safe removal of bolt handle and proper reseating of barrel. I've used this weapon so long that it seems to point itself, sure hate to have to continue using the Ruger 10/22 (too heavy/box clips...). Please send disassembly/reassembly instructions (much appreciation). [email protected]

March 4, 2006, 08:23 PM	#42
flyker Junior Member Join Date: March 4, 2006 Location: Within passport range Posts: 1	Ah, to Make the Nyklon 66 Fire... Along about for my 21st birthday, my best friend gave me a new Remington Nylon 66 . Seemed like a nice enough rifle, at the time, but it never quite learned to chamber the next round. Thought it might get over that, but 'Ve always had to eject an unspent shell, in order to chamber the one behind it. Noticed that you've been able to help the fellers before me and would sure appreciate similar info. Guess it's about time to get real familiar with an otherwise darned comfortable rifle. My friend and I still keep in touch on a regular basis. It'd be nice to call and tell him I'd fixed the thing (he gets all soft and mushy over stuff like that). Thank you, in advance, kind sir. [email protected]

March 18, 2006, 08:03 PM	#43
ivanx Junior Member Join Date: March 3, 2006 Posts: 2	Mr. Nolden, many thanks. Have now passed my own test (performed fourth disassembly/reassembly from memory). Will only put Yellow Jackets through this rifle from now on, had been using off-brand for the past year. I was surprised that, although there was enough carbon build up to keep me permanently restricted to Post, this 24yr. old - never been cleaned - constantly used weapon is essentially in perfect condition (didn't even have to readjust the aim). Will be recommending this site and your forum to fellow gun owners. Keep up the good work!

March 18, 2006, 09:55 PM	#44
ride-a-aug Member Join Date: July 10, 2005 Posts: 85	If possible please send me instructions for the nylon 66 , like everyone esle I too failed the disassembly test. Send to [email protected] Thanks in advance.

March 19, 2006, 04:34 PM	#45
Swan Hunter Member Join Date: February 26, 2005 Posts: 46	Nylon 66 instructions. Would very much appreciate Dissamble/Reassemble instructions. Thanks in advance [email protected] __________________ If I had known having parents would have been this much trouble, I wouldn't have had any!

March 21, 2006, 04:03 PM	#46
chuck c Junior Member Join Date: March 21, 2006 Posts: 1	nylon 66 Just got a Remington nylon 66 from my father in-law.I would appreciate the assemble/disassemble instructions. Thank you in advance! Hope it makes it past the network stuff.

March 23, 2006, 08:49 AM	#47
GUNSMOKE45441 Senior Member Join Date: December 2, 2004 Posts: 129	A friend brought me one with the parts in a baggy, luckily I had an old NRA book that covered it. what a nightmare!!

March 28, 2006, 09:56 PM	#48
finns Junior Member Join Date: March 28, 2006 Posts: 1	I have a 10C and a Rem 66 and would like to take them down and clean them but haven't out of fear of not being able to get them back together. Could someone please send me the info. [email protected] Thanks!

April 19, 2006, 08:58 PM	#49
onebohemian Member Join Date: April 19, 2006 Posts: 17	Harley (or one of you guys that have already gotten them), please send me a copy of those disassembly/reassembly instructions too. Stumbled upon a Seneca Green 66 today at a pawn shop and couldn't let it pass me by. Probably paid a little more than she's worth at the moment as she needs some tender loving care. Gun is all together and shop owner guaranteed it (for what that's worth). Figured it would be a worthy cause to finally give this one a home that she can feel safe in. With those instructions and some quality time, I should have her back in top shape before even I know it. Ten-fold thanks in advance to Harley and the crew. Mark

April 20, 2006, 01:58 PM	#50
Harley Nolden Staff In Memoriam Join Date: January 8, 1999 Location: Brunswick,GA USA Posts: 1,884	onebohemian: Instructions sent by separate email HJN

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search