The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools Search this Thread
Old January 12, 2018, 08:01 PM   #1
303 Savage Hunter
Junior Member
 
Join Date: January 12, 2018
Location: Louisville Ky
Posts: 2
1903A3

Hello, I am new to collecting US Service weapons but I have picked up what I think is a sweet Remington 1903A3. The serial number on the rifle says it was made in 1942, the serial number is also about 10,000 below when production on the 1903A3 began in 1943 so I think I have one of the first 2000 1903A3's made in 1942

My questions is what stock should be on the rifle. it has what looks to be a field replacement with multiple repairs and a decent split behind the receiver. I know there are a number of stocks so I want to make sure I put a stock on it that should have been on it in 1942.

Thank you,
Tony
Attached Images
File Type: jpg 1903A3.jpg (26.8 KB, 279 views)
303 Savage Hunter is offline  
Old January 13, 2018, 12:22 AM   #2
Steve in PA
Senior Member
 
Join Date: October 14, 1999
Location: Northeastern PA
Posts: 755
Your serial number puts the rifle near the end of the production line in Dec 1942, so it was near the end of the 300,000 or so rifles made by Remington that year.

A straight stock would be the correct stock for that rifle.
__________________
Steve
Steve in PA is offline  
Old January 13, 2018, 01:32 PM   #3
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
"...production on the 1903A3 began in 1943..." Started in 1942 with some in 1941. Like Steve says, your's is a December of '42.
Rummage around here. Clicking on 'Manufacture Dates' can make your head explode though. Lotta work put in there.
http://m1903.com/
"...a field replacement..." More likely to have been done at some time since 1942. Any rebuild marks on it?
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old January 13, 2018, 02:53 PM   #4
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 18,486
Remington made 1903 and 1903 Modified rifles in 1941 and most of 1942.
The 1903A3 with receiver sight was first delivered Dec. 1942, with some 1903 Mod still coming out into 1943.
Jim Watson is offline  
Old January 14, 2018, 01:00 AM   #5
303 Savage Hunter
Junior Member
 
Join Date: January 12, 2018
Location: Louisville Ky
Posts: 2
there are no cartouches or rearsenal marks on the current stock. it has a 4 grove SC barrel. and the current stock shows several repairs. the rifle itself has a milled trigger guard, butt
303 Savage Hunter is offline  
Old January 23, 2018, 04:30 AM   #6
Ibmikey
Senior Member
 
Join Date: June 1, 2013
Location: Now relocated to Texas
Posts: 2,943
With milled guard and SC barrel you obviously have a rebuild so as far as the stock goes you can pick any one of the three. I would replace your beater with a scant stock from SARCO and then enjoy shooting your piece of US military history.
Ibmikey is offline  
Old January 23, 2018, 06:57 PM   #7
gw44
Senior Member
 
Join Date: March 15, 2015
Location: Michigan
Posts: 311
I hunted with one for years, they were every where easy to get and great shooters, people would cut the stocks down and make a custom gun !!!
gw44 is offline  
Old January 23, 2018, 10:14 PM   #8
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
Quote:
I hunted with one for years, they were every where easy to get and great shooters, people would cut the stocks down and make a custom gun !!!
Some were better at it than others. Some of them could cut down a stock and make it fairly decent looking. Others just cut them down without a care for how it looked.
Hawg is offline  
Old January 23, 2018, 10:52 PM   #9
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 18,486
I had an imitation NRA Sporter. A 1903 barreled action in a 1922 .22 stock.
Not a fake, it was a Remington 03 action, a Remington A3 barrel (no sight sleeve spline cut, but 4 groove) and a Lyman 48 sight. A little heavy by present standards, but well proportioned and good handling. Accurate, too; especially with Speer 130 gr JHP.
Jim Watson is offline  
Old January 23, 2018, 11:38 PM   #10
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
The M1903A3's may have been, as a group, the most accurate military rifle ever made. I have owned several and fired many and all were tack drivers. Many had two grove barrels but those were just as accurate. I have never seen any explanation for it; maybe it was the lack of the rear sight band or something else but they all shot well. In fact there was one rumor that the A4 sniper rifles were picked for accuracy from batches of A3's, but that was not true since the A4 had the receiver markings to the side so the mounts wouldn't cover the serial number. (The marking still said ""A3" though.)

Jim
James K is offline  
Old January 24, 2018, 02:09 PM   #11
gw44
Senior Member
 
Join Date: March 15, 2015
Location: Michigan
Posts: 311
Yes Hawg some were just hacked off but some were done right, the one I had was done by my shop teacher who sold it to me, I paid $25 for it, sold it 5yrs later for a $100 I had one of the best guns I ever owned and didn't know it !!!!!!
gw44 is offline  
Old March 24, 2018, 08:11 AM   #12
jimsouth
Member
 
Join Date: February 22, 2018
Posts: 77
Quote:
Originally Posted by gw44 View Post
Yes Hawg some were just hacked off but some were done right, the one I had was done by my shop teacher who sold it to me, I paid $25 for it, sold it 5yrs later for a $100 I had one of the best guns I ever owned and didn't know it !!!!!!
My father bought four 03s after WW2 ( $35.00 each ); still in cosmoline. I still have one ( full military ), with a Kahles Competition telescopic sight.
jimsouth is offline  
Old March 25, 2018, 09:23 AM   #13
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
If you have an 'A3 with a 2 groove barrel, you really need to try cast bullets. Something about the 2 groove that make excellent, accurate cast bullet rifles.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School
Distinguished Rifle Badge 1071
kraigwy is offline  
Old March 25, 2018, 12:54 PM   #14
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
Quote:
Yes Hawg some were just hacked off but some were done right, the one I had was done by my shop teacher who sold it to me, I paid $25 for it, sold it 5yrs later for a $100 I had one of the best guns I ever owned and didn't know it !!!!!!
Mine was done right and cost considerably more than 25 bucks.

Hawg is offline  
Old March 25, 2018, 01:45 PM   #15
RC20
Senior Member
 
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
Someone wanted a nice gun off a 1903 action badly.

Some serious bucks there.

Nice looking piece.
__________________
Science and Facts are True whether you believe it or not
RC20 is offline  
Old March 25, 2018, 01:50 PM   #16
RC20
Senior Member
 
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
Quote:
Hello, I am new to collecting US Service weapons but I have picked up what I think is a sweet Remington 1903A3.
There are a couple of mil surplus sites that would be good to join and some books to read.

CMP Bolt Action (with John Beard and Rick the Librarian with great data, a number of others who know the rifles inside and out)

Jousters

Mil Surplus Forum.

Clearly a re-build and great fun to shoot, but about as far from original as you can get.

1903s and even more so the A3s are amazingly varied with all sorts of nuances to them.
__________________
Science and Facts are True whether you believe it or not
RC20 is offline  
Old March 25, 2018, 05:09 PM   #17
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
Quote:
Someone wanted a nice gun off a 1903 action badly.

Some serious bucks there.

Nice looking piece.
Yep, yep and thank you.
Hawg is offline  
Old March 25, 2018, 06:42 PM   #18
RC20
Senior Member
 
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
My brother did a couple, stocks not as cool nor the barrel fluting. Action is nice so agreed its a good one to convert as long as its not a mil surplus keeper.

Funny part was he would get a donor and go shoot it, then could not stand to tear it down because it shot so good.

I told him to quit shooing the donor and just turn it over to the gunsmith!

I went with Savage so I could change barrels myself, he gets a lot of compliments on his for sure.
__________________
Science and Facts are True whether you believe it or not
RC20 is offline  
Old March 26, 2018, 02:07 PM   #19
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 21,824
Jimsouth - image of the one with the Kahles sight?
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old April 7, 2018, 04:27 PM   #20
41 Magnum
Member
 
Join Date: August 31, 2010
Location: Central Pa.
Posts: 66
My Dad & a close friend who was a competition shooter & gunsmith, ordered several of the 03-A3's in the 1950's. I am proud to own two of them. One is still in very good original condition, the other took an awful lot of time & hand work, and years to complete my sporter version below. The stock started life as a French Walnut 2½" X 8" plank The Bbl. is 18½", Timney trigger etc.






__________________
I have gotten smarter as I've aged, . . . . . . . . No, Really !!!
41 Magnum is offline  
Old April 7, 2018, 09:20 PM   #21
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
Quote:
My Dad & a close friend who was a competition shooter & gunsmith, ordered several of the 03-A3's in the 1950's. I am proud to own two of them. One is still in very good original condition, the other took an awful lot of time & hand work, and years to complete my sporter version below. The stock started life as a French Walnut 2½" X 8" plank The Bbl. is 18½", Timney trigger etc.
I like that.
Hawg is offline  
Old April 9, 2018, 07:29 AM   #22
Ricklin
Senior Member
 
Join Date: February 22, 2008
Location: SW Washington state
Posts: 1,996
Quote:
Originally Posted by 41 Magnum View Post
My Dad & a close friend who was a competition shooter & gunsmith, ordered several of the 03-A3's in the 1950's. I am proud to own two of them. One is still in very good original condition, the other took an awful lot of time & hand work, and years to complete my sporter version below. The stock started life as a French Walnut 2½" X 8" plank The Bbl. is 18½", Timney trigger etc.






I just love that Mannlicher stock. Something about a full stocked rifle.
Been considering the same treatment for my .270 FN Mauser.
Should the right stock come along it will be wearing one.

I also have a 10/22 carbine with the full stock, it's the cutest little thing.
__________________
ricklin
Freedom is not free
Ricklin is offline  
Old April 11, 2018, 01:34 PM   #23
Remington74
Senior Member
 
Join Date: August 5, 2012
Location: Carthage, NY
Posts: 231
Very nice stock. I am very jealous since all I could do with a nice piece of French Walnut is makes sawdust. Again, beautiful work on that stock.
Remington74 is offline  
Old April 12, 2018, 09:09 AM   #24
dahermit
Senior Member
 
Join Date: October 28, 2006
Location: South Central Michigan...near
Posts: 6,501
Quote:
Very nice stock. I am very jealous since all I could do with a nice piece of French Walnut is makes sawdust. Again, beautiful work on that stock.
That is "French Walnut"? What makes it French Walnut and not just a fairly straight-grained piece of American Walnut? Am I missing something here?
dahermit is offline  
Old April 12, 2018, 01:18 PM   #25
emcon5
Senior Member
 
Join Date: July 10, 1999
Location: High Desert NV
Posts: 2,850
Quote:
That is "French Walnut"? What makes it French Walnut and not just a fairly straight-grained piece of American Walnut?
It goes on strike every few months.
emcon5 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.11787 seconds with 9 queries