The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools Search this Thread
Old June 27, 2018, 05:01 PM   #1
dontcatchmany
Senior Member
 
Join Date: July 19, 2010
Posts: 460
20 Gauge Minishells?

Is there such a thing as the 1 3/4 inch 20 gauge mini shells??

I know they are available for 12 ga, but can not seem to find them in 20 ga.

Thanks!
dontcatchmany is offline  
Old June 27, 2018, 08:36 PM   #2
Model12Win
Junior member
 
Join Date: October 20, 2012
Posts: 5,854
No but you can roll your own, reloading shotshells is a snap. Getting them to feed though may be more of a challenge without the adapters available for the 12s.
Model12Win is offline  
Old June 27, 2018, 08:46 PM   #3
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 10,981
I wish there were!
Attached Images
File Type: jpg IMG_3934.JPG (101.3 KB, 399 views)
__________________
Bill DeShivs, Master Cutler
www.billdeshivs.com
Bill DeShivs is offline  
Old June 27, 2018, 08:49 PM   #4
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 10,981
Remington does make a low-recoil personal defense buckshot load in 20 ga.
I haven't found them yet.
__________________
Bill DeShivs, Master Cutler
www.billdeshivs.com
Bill DeShivs is offline  
Old June 27, 2018, 10:12 PM   #5
Model12Win
Junior member
 
Join Date: October 20, 2012
Posts: 5,854
Quote:
Originally Posted by Bill DeShivs View Post
Remington does make a low-recoil personal defense buckshot load in 20 ga.
I haven't found them yet.
Me neither. Googled it and found nothing?
Model12Win is offline  
Old June 28, 2018, 04:10 AM   #6
dontcatchmany
Senior Member
 
Join Date: July 19, 2010
Posts: 460
Thanks!

I ordered some low recoil 20 gauge. Lucky Gunner. Actually have the 12 ga clip for mini shells and also low recoil 12 ga. Have not fired them yet but will soon.

Thanks again!
dontcatchmany is offline  
Old June 28, 2018, 10:06 AM   #7
MarkCO
Senior Member
 
Join Date: October 21, 1998
Location: Colorado, USA
Posts: 4,307
Kent Cartridge Gamebore makes a 2-1/2" shell for the English guns. Shortest commercial one I am aware of.

http://kentgamebore.com/products/gamebore-regal.html
__________________
Good Shooting, MarkCO
www.CarbonArms.us
MarkCO is offline  
Old June 29, 2018, 09:19 AM   #8
dontcatchmany
Senior Member
 
Join Date: July 19, 2010
Posts: 460
Just now shot 20 shells of 20 ga Mossberg 500 Persuader. Approx 5 yards.

I had put on a Shockwave Tech Raptor grip to replace the pistol grip.

First 5 shots were regular #8 shot. Quite a bit less recoil than the pistol grip....actually very much fun. With the pistol grip, my hand hurt for a couple of days with 5 rounds....not so with the Raptor gip

Next 15 shells were Winchester AA Low noise/low recoil # 8 shot. Fantastic. Again more fun. And less noise.

The gun performed flawlessly rapid fire....rapid for my old body.

All 20 rounds had a nice accurate tight pattern at that 5 ish yards. Tore the targets I had on my stands to pieces. I believe that this will be a good defensive gun.

Now to progress to 000 or 0000 buck....or what ever it is called. I think the 0000 has 27 pellets that are 38 caliber ea??????… not sure. And also to back up a couple of yards.

I am anticipating the 590 Shockwave in 12 ga. I have mini shells for it as well as the low noise/low recoil.

Any one want to buy a Remington 870 Express Magnum (lefthanded) 12 ga. I have had it since around 2005 and it probably has less than 150 rounds through it. If I had been able to find a short barrel (18 1/2 ") I would have just put a Raptor Grip on it and be done....dang it. Maybe I will give it to my grandsons when they get a tad older.
dontcatchmany is offline  
Old June 30, 2018, 12:14 PM   #9
Ricklin
Senior Member
 
Join Date: February 22, 2008
Location: SW Washington state
Posts: 2,011
????

The more 0's the bigger the shot. Do believe that 0000 would be single digit numbers.

Google is our friend, for 12 gauge 2 3/4 8 pellets. 12 for 3" mag 12 gauge.
__________________
ricklin
Freedom is not free
Ricklin is offline  
Old July 3, 2018, 02:51 AM   #10
kozak6
Senior Member
 
Join Date: June 16, 2005
Location: AZ
Posts: 3,113
No reason you can't load your own. You should be able to pick up a Lee Load All, a roll crimper, and load data from Ballistic Products for under $100, easy.

The hard part is feeding. You might have to improvise something like an Opsol miniclip too.
kozak6 is offline  
Old July 4, 2018, 08:49 AM   #11
rc
Senior Member
 
Join Date: April 28, 2001
Location: CA
Posts: 1,765
Some confusion, look it up

No shotgun shoots 38 caliber balls. OOO for 12 gauge is 36 but nobody loads that in 20. The biggest pellets for 20 are #1 buck, 9 pellets from Rio and Spartan. You can also get #2 and #3 buck loads in 2 3/4 or 3 inch from the major players. These are 30, 27 and 25 caliber respectively. Still good enough up close but a 20 is not a 12 as far as payload. And you guys wanting mini shells are just wishing for a jam when you need your gun the most.

https://www.huntingnet.com/forum/upf...A4992041BB.jpg
rc is offline  
Old July 4, 2018, 01:09 PM   #12
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 10,981
My gun doesn't jam. It's a double 20 ga.
And, it's a pistol.
__________________
Bill DeShivs, Master Cutler
www.billdeshivs.com
Bill DeShivs is offline  
Old July 4, 2018, 07:53 PM   #13
rc
Senior Member
 
Join Date: April 28, 2001
Location: CA
Posts: 1,765
Then your limit is set regardless of the length.

I think your answer misses the point.
rc is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.07111 seconds with 9 queries