The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools Search this Thread
Old August 23, 2018, 04:25 PM   #1
luger fan
Member
 
Join Date: March 10, 2018
Posts: 42
Broomhandle?

Hi All,

Don't know why but for almost 50 years I wanted a Mauser Broomhandle in 9mm. When they were available I couldn't afford one, now I can.

Anyone have one? What do you think of it?

Thanks,
Luger
luger fan is offline  
Old August 23, 2018, 06:40 PM   #2
Wyosmith
Senior Member
 
Join Date: December 29, 2010
Location: Shoshoni Wyoming
Posts: 2,537
I do. My wife inherited it. It's a 1917 made Mauser C96 in unfired condition.
She wants to sell it.
If you are interested PM me and I'll give you an e-mail address to write and I'll send you pictures.
Wyosmith is offline  
Old August 23, 2018, 11:53 PM   #3
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 18,797
I had a Bolo that had been rebored to 9mm Luger. Not bad with the reproduction stock, though "wobbly".

Absolutely the most painful 9mm I ever shot and up there on painful for handguns overall. The size, shape, and above all the metal slot in the grips just hurts.

Sold it a couple years ago, sorry.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is online now  
Old August 24, 2018, 01:14 AM   #4
Dr. Strangelove
Senior Member
 
Join Date: August 1, 2008
Location: Athens, GA
Posts: 1,435
No help here, but I remember when those those things were <$100 at gun shows, mostly in 7.63 Mauser. They couldn't give them away, lol. Shooter GI 1911's were $200 and good Lugers were around $300.

I was in high school then and that may as well have been a million bucks. A local "kitchen table FFL" had a barrel of Egyptian 8mm Hakims for $50-$60, you could get Garands for about $200 then as well. Some of those Swedish "pull bolt" rifles were $30-$40.

If I had a time machine, I'd go back and buy them all.

Out of curiosity, where's a good place to look for decently priced Lugers?

The gun I learned to shoot on was a 1916 DWM Artillery model bring-back that belonged to my grandfather. I was seven years old and fascinated by it, I bugged him all the time to handle it. One day he handed it to me,said "learn how to take it apart, clean it, and reassemble it correctly and you can shoot it." (I guess he was tired of me bugging him). It took me about two hours, but I finally brought him the correctly disassembled, cleaned, reassembled pistol. (This was 38 years ago, way before you could look this stuff up on the internet)

I remember him looking at me with smile and and saying, "well, your grandma's not home so let's go to the basement". I've been hooked ever since, though I since learned that no ear protection and a tiny hand-dug basement is not the best place to shoot.
__________________
Just remember, when you pull the trigger, the bullets come out going very, very fast. So make sure to keep the weapon pointing away from you.

Last edited by Dr. Strangelove; August 24, 2018 at 01:32 AM.
Dr. Strangelove is offline  
Old August 24, 2018, 01:49 AM   #5
TruthTellers
Senior Member
 
Join Date: October 22, 2016
Posts: 2,196
My uncle has one and I shot it once. The grip was uncomfortable, the sights were awful, the trigger was average, and it was badly balanced.

I had an interest in them before then and lost it that day. There are better historical guns for the money.
__________________
Any good revolver > Any good semi auto
TruthTellers is offline  
Old August 24, 2018, 04:18 AM   #6
tangolima
Senior Member
 
Join Date: September 28, 2013
Posts: 2,045
I have one, in fact 1 1/4, in .30 Mauser, but it is not for sale. I had wanted one since I was little. Finally I got one off GunBroker for $650. Not in good shape. Bore had been relined. But I didn't care. I like it as it is and the history associated with it.

I needed to work on it quite a bit and replace some parts to make it shoot safely. In the process of looking for parts, I bid on a bolo upper and won it. I don't care about the bolo, but I wouldn't mind having the upper as spare. So I have one and a quarter of a broomhandle.

It is indeed a difficult pistol to shoot. But I don't care. I like it as it is, a pride of my collection. For about a century it has traveled all around the world. In the last leg of its journey, it almost didn't make it. I fixed it up, and now we travel together.

-TL

Sent from my SM-G930T using Tapatalk
tangolima is offline  
Old August 24, 2018, 06:59 AM   #7
highpower3006
Senior Member
 
Join Date: July 30, 2011
Location: Reno NV
Posts: 903
I have a couple. I like them from a historical standpoint and they are a crowd pleaser when you bring one out at a range. One of mine is getting to be so valuable that I am kind of reluctant to shoot it, but the other is one of the beaters that came into the country from China back around 20-30 years ago and that one I have no problem shooting. If you do get one, I would advise installing new springs right off the bat.

1916 commercial, matching numbers including the stock, '16 dated leather "holster" and military proofed:



Pictured with my 1930's era Bolo, which has zero finish and I had to have the barrel relined as there was virtually no rifling in it when I got it. But for the $130 I originally paid for it I am not complaining.

highpower3006 is offline  
Old August 24, 2018, 10:28 AM   #8
RickB
Senior Member
 
Join Date: March 1, 2000
Location: Western WA
Posts: 7,715
The only broomhandle I have experience with was a Chinese-made version chambered in .45 auto, and I had a serious case of the wants after handling it briefly.
They're a cool artifact, but I wouldn't want to have a lot of money tied-up in a "collector" grade gun that I didn't want to devalue by shooting, and I'm now having parts breakage issues with my Luger, and wouldn't want another gun that needed repairing out of proportion to how much it's shot.
__________________
Runs off at the mouth about anything 1911 related on this site and half the time is flat out wrong.
RickB is offline  
Old August 26, 2018, 10:44 AM   #9
Old 454
Senior Member
 
Join Date: August 15, 2011
Location: Chesterton Ind.
Posts: 592
The only broom handle I am familiar with... the one my wife hands to sweep out the garage O.o....sorry could not resist
Old 454 is offline  
Old August 26, 2018, 03:20 PM   #10
RC20
Senior Member
 
Join Date: April 10, 2008
Location: Alaska
Posts: 5,281
Missed those back in the day.

I find them interesting but not desirable?
__________________
Science and Facts are True whether you believe it or not
RC20 is offline  
Old August 27, 2018, 07:40 AM   #11
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 40,041
I've always been fascinated with the Broomhandles. They're not a great handling gun, but they have a neat factor that few other guns can match.

I've shot numerous versions over the years in 9mm and 7.63, but I won't shoot them anymore.

I've seen one too many develop cracks in the bolt, and know of one person who was injured when the bolt fractured during firing and a chunk of it caught him in the face and broke his cheek bone and cut him up.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old August 27, 2018, 06:55 PM   #12
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 13,471
Shooting a Broomhandle is uncomfortable in 7.63 Mauser or 9mm. I can only imagine a Broomhandle in 45 ACP would take that discomfort up a few notches.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old August 28, 2018, 09:07 AM   #13
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 20,158
Even with my small hands, I got hammer bite from shooting a small ring broomhandle when the shoulder stock was attached (this was in Germany). Despite this, I think they are awesome and as they incorporate something no modern firearm has: virtually all interlocking parts. With exception of the grip screw and pins for the sight, the C96 snaps together like a Lego kit.

I'd go with that minty C96 Wyosmith has. Better have some bucks though. Save up if you don't. Ask him if he'll do installment payments like in the '50-s or '60s. You paid in installments and once the installments were complete, it's yours.

Best book I have on the C96 is the one by Charles Pate, The Broomhandle Pistol: 1896-1936. It's also the newest (circa 1990 or so) but very pricey on the used market.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06865 seconds with 8 queries