|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
November 11, 2012, 04:23 PM | #1 |
Senior Member
Join Date: August 13, 2011
Location: Seattle area
Posts: 661
|
sticky trigger on a model 99
Anybody ever done a trigger job on one of these?? Mine is really gritty before breaking, It's a 1951 EG in 300 Savage.
|
November 11, 2012, 05:12 PM | #2 |
Senior Member
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,586
|
Clean it thoroughly, and oil it with lighter fluid.
__________________
Keep your Axe sharp and your powder dry. |
November 11, 2012, 08:02 PM | #3 |
Senior Member
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
|
Lighter fluid ?? Please use a proper , good quality gun oil !
__________________
And Watson , bring your revolver ! |
November 13, 2012, 03:41 AM | #4 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Actually, lighter fluid used to be the recommended lubricant, high VOC with light oil residue. But today there are many, many good quality lubricants that will work without gumming.
And as far as the trigger on a 99, if you have to ask how, don't do it. It is not overly complex, but then neither was the detonator on the first atomic bomb.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
November 13, 2012, 07:19 AM | #5 |
Senior Member
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
|
One thing you must NEVER do is take apart a 99 rotary magazine !!
__________________
And Watson , bring your revolver ! |
November 13, 2012, 07:57 AM | #6 |
Senior Member
Join Date: February 21, 2010
Location: Rome, NY
Posts: 941
|
Take it to a good gunsmith. Sounds like the sear needs to be recut.
__________________
Jim Page Cogito, ergo armatum sum |
November 15, 2012, 02:20 PM | #7 |
Senior Member
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 4,678
|
As I posted on THR when you posted this question:
This book: https://www.riflemagazine.com/catalo...productid=1655 Has a magazine article from 1977 on "Slicking the Savage 99". 5 of the 7 pages are on trigger improvement. In that article it says, "Unfortuenatley, the trigger and sear engagement at point "C" is concealed in the receiver recesses, so adjustment of the sear notch is something of a trial and error proceedrure..."
__________________
The word 'forum" does not mean "not criticizing books." "Ad hominem fallacy" is not the same as point by point criticism of books. If you bought the book, and believe it all, it may FEEL like an ad hominem attack, but you might strive to accept other points of view may exist. Are we a nation of competing ideas, or a nation of forced conformity of thought? |
November 15, 2012, 08:36 PM | #8 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
I don't know which model is involved, but be very careful in trying to adjust trigger pull on the old Savage 99's. The new ones are different, but trying to cut the pull on the old models can result in the rifle firing out of battery with disastrous results for the rifle and possible injury to the shooter.
Jim |
November 18, 2012, 01:59 AM | #9 |
Senior Member
Join Date: August 13, 2011
Location: Seattle area
Posts: 661
|
I won't alter it, just clean & oil. If it doesn't clean up, I will just have to shoot it more to wear it in. Although it has killed animals over the years, prior to my ownership I don't think it was shot but maybe a couple/three times a year.
I have probably put 200 rounds in ten years in it. |
November 20, 2012, 05:50 PM | #10 |
Senior Member
Join Date: March 3, 2011
Location: Vernon AZ
Posts: 1,195
|
I would have the trigger thoroughly cleaned using an ultrasonic degreaser/cleaner before I would have any work done on it.
I knew a guy in Smackover AR who did trigger jobs on S&W. His technique was to remove the side plate fill it with break free and a fine grinding compound. Have the owner shoot a 100 rounds or so and bring it back. He cleaned the stuff out, ensuring all the grinding compound was removed, and gave it back to the owner. The S&W M-15 I shot which he had treated had one of the smoothest actions I ever felt. |
|
|