Rem 887 Tactical Choke

4T4MAG · May 31, 2012, 09:59 PM

I realize that the Rem. Tac Choke is for door breaching. Being that it is integrated into the choke, what would happen if it were used to punch something in the rib cage, shoulder or head? Would/could it buckle inside the barrel causing an obstruction? Would it not be better to integrate the jagged edge into the barrel?

CK_32 · June 1, 2012, 11:00 PM

I'd say the barrel should be able to take it. It's probably a lot more ridged than your skull or rib. No actual experience but I shout it would buckle unless you had a major flaw in your barrel to begin with. And if that's your last resort f it bend your barrel and you now have a 7lb bat. Don't not ruin your barrel to save your life being scared of bending the barrel.

May 31, 2012, 09:59 PM	#1
4T4MAG Senior Member Join Date: April 28, 2009 Posts: 162	Rem 887 Tactical Choke I realize that the Rem. Tac Choke is for door breaching. Being that it is integrated into the choke, what would happen if it were used to punch something in the rib cage, shoulder or head? Would/could it buckle inside the barrel causing an obstruction? Would it not be better to integrate the jagged edge into the barrel?

June 1, 2012, 11:00 PM	#2
CK_32 Senior Member Join Date: April 11, 2009 Location: Orange County, Ca Posts: 450	I'd say the barrel should be able to take it. It's probably a lot more ridged than your skull or rib. No actual experience but I shout it would buckle unless you had a major flaw in your barrel to begin with. And if that's your last resort f it bend your barrel and you now have a 7lb bat. Don't not ruin your barrel to save your life being scared of bending the barrel. __________________ Bullet placement over bullet wastement