The Right Tools for the Job

bob.a · May 15, 2010, 07:46 PM

I'm in need of some screwdrives of various sizes for simple firearms-related tasks. Nothing particularly serious, but the range would be from very small (for adjusting sights, for example the front blade sight on an early Colt Woodsman) to removing grips etc.

As you all are doubtless aware, a blade of the wqrong size can bugger up a screw head, slip out and scratch a surface, and so forth. Ideally I suppose a set of hanles with variously-sized blades would be the ticket. Local shops do not seem to have this sort of thing on hand, so I thought I'd ask here.

Your recommendations, please. And thank you.

hoytinak · May 15, 2010, 07:51 PM

I use a Magna Tip set I got from Brownells. Check them out, they have all different types of sets for just about everything you'd ever need. http://www.brownells.com/.aspx/pid=4...ER_SETS_trade_

hoghunting · May 15, 2010, 11:20 PM

Chapman also makes a few sets, and they come in a cases that are perfect for a range bag or box. They also have a great customer service.

SCcdp · May 16, 2010, 02:32 PM

I use a Wheeler set. It is good for the money, but if I had it to do over I'd probably go with the Magna Set from Brownell's as well.

aarondhgraham · May 17, 2010, 10:49 AM

They tout them as being gunsmith tools.

Imagine my surprise when I saw he same red-cased set at Wally-World.

dksac2 · May 20, 2010, 06:52 PM

The Brownells Maga tip set costs the most, but has the widest number of available sizes. Their thin bit set is a must for a lot of the double shotguns and Browning Auto 5.
The other bonus is that if you twist or break a bit, a call to Brownells will get a new bit sent right out to you at no charge. You don't even have to send the old bit back in. It pays off in the long run. as they are a lifetime investment.

Best Regards, John K

Casimer · May 20, 2010, 09:12 PM

+1 on magna-tips, if you're willing to spend a little more. Otherwise the $20 Pachmayr kit has a good selection, and the standard bits are hollow ground.

May 15, 2010, 07:46 PM	#1
bob.a Senior Member Join Date: February 15, 2009 Posts: 298	The Right Tools for the Job I'm in need of some screwdrives of various sizes for simple firearms-related tasks. Nothing particularly serious, but the range would be from very small (for adjusting sights, for example the front blade sight on an early Colt Woodsman) to removing grips etc. As you all are doubtless aware, a blade of the wqrong size can bugger up a screw head, slip out and scratch a surface, and so forth. Ideally I suppose a set of hanles with variously-sized blades would be the ticket. Local shops do not seem to have this sort of thing on hand, so I thought I'd ask here. Your recommendations, please. And thank you.

May 17, 2010, 10:49 AM	#5
aarondhgraham Senior Member Join Date: December 1, 2009 Location: Stillwater, OKlahoma Posts: 8,638	Cabela's has a set of hollow-ground screwdriver bits,,, They tout them as being gunsmith tools. Imagine my surprise when I saw he same red-cased set at Wally-World. __________________ Never ever give an enemy the advantage of a verbal threat. Caje: The coward dies a thousand times, the brave only once. Kirby: That's about all it takes, ain't it? Aarond is good,,, Aarond is wise,,, Always trust Aarond! (most of the time)

May 15, 2010, 07:51 PM	#2
hoytinak Senior Member Join Date: July 5, 2006 Location: Texas Posts: 5,721	I use a Magna Tip set I got from Brownells. Check them out, they have all different types of sets for just about everything you'd ever need. http://www.brownells.com/.aspx/pid=4...ER_SETS_trade_

May 15, 2010, 11:20 PM	#3
hoghunting Senior Member Join Date: March 27, 2006 Posts: 1,559	Chapman also makes a few sets, and they come in a cases that are perfect for a range bag or box. They also have a great customer service.

May 16, 2010, 02:32 PM	#4
SCcdp Senior Member Join Date: November 29, 2004 Location: South Carolina Lowcountry Posts: 103	I use a Wheeler set. It is good for the money, but if I had it to do over I'd probably go with the Magna Set from Brownell's as well.

May 20, 2010, 06:52 PM	#6
dksac2 Member Join Date: May 17, 2010 Posts: 62	The Brownells Maga tip set costs the most, but has the widest number of available sizes. Their thin bit set is a must for a lot of the double shotguns and Browning Auto 5. The other bonus is that if you twist or break a bit, a call to Brownells will get a new bit sent right out to you at no charge. You don't even have to send the old bit back in. It pays off in the long run. as they are a lifetime investment. Best Regards, John K

May 20, 2010, 09:12 PM	#7
Casimer Senior Member Join Date: April 23, 2007 Location: Pennsylvania, USA Posts: 1,918	+1 on magna-tips, if you're willing to spend a little more. Otherwise the $20 Pachmayr kit has a good selection, and the standard bits are hollow ground.