November 25, 2019, 11:12 AM | #1 |
Junior Member
Join Date: November 23, 2019
Posts: 2
|
Thompson T/CR22 Scope
Any suggestions for the height of rings for a Nikon Prostaff Rimfire !! 3-9x40 scope. Thanks
|
November 26, 2019, 05:28 PM | #2 |
Senior Member
Join Date: January 3, 2006
Location: Brockport, NY
Posts: 3,717
|
If you have a grooved receiver you should do well with medium to high rings- the high ones will definitely have enough height for the 40mm bell to clear the barrel.
__________________
You are the bows from which your children as living arrows are sent forth. |
November 26, 2019, 07:38 PM | #3 | |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
Fit the rings to your scope.
Quote:
Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing. |
|
November 27, 2019, 07:52 AM | #4 | |
Senior Member
Join Date: January 3, 2006
Location: Brockport, NY
Posts: 3,717
|
Quote:
Medium height rings should easily get the OP enough clearance for the 40mm objective bell
__________________
You are the bows from which your children as living arrows are sent forth. |
|
November 28, 2019, 12:22 PM | #5 |
Junior Member
Join Date: November 23, 2019
Posts: 2
|
Thanks for all the advice. Think I will go with the Medium. Thanks again to all John
|
March 9, 2020, 08:24 PM | #6 |
Junior Member
Join Date: March 9, 2020
Posts: 1
|
|
|
|