Can you ID this Stevens Shotgun For Me

spirit1957 · April 7, 2009, 03:46 PM

I have pics of this gun..
It is a 12 gauge, single shot, Hammerless, a safety on the tang.
The tang measures .561 Width 3 1/2 inch length.
The barrel is 30 inches long.
It only has Stevens on the butt.
Would anyone know the model??
I need to have the stock and forward assembly repaired.
I know it is atleast 45 years old..probably much older.
Thank you!!

a7mmnut · April 7, 2009, 04:26 PM

Savage 220 1947-1965. Unable to find a Stevens equivalent model. Prices vary, depending upon availability. -7-

PetahW · April 7, 2009, 07:42 PM

The design of the stock's PG looks older - from the 1930's IMHO.
IIRC, M220's have been made since at least 1938 - but replacement wood for any of the hammergun series (94/944, 104/105/107) from Numrich Arms should also fit.

http://www.e-gunparts.com/products.a...=089Zz220A&MC=

.

jaguarxk120 · April 8, 2009, 07:28 AM

Stevens made a model 182 break open hammerless shotgun. The model series ran from 182, 185, 190, and 195, each model a higher grade. The stock should be checkered and what they call trap grade.

PetahW · April 8, 2009, 07:52 AM

FWIW, This is Numrich's parts listing for the Stevens 180 hammerless series:

http://www.e-gunparts.com/products.a...HAMMERLESS&MC=

They list no wood, but have forend iron, etc.

.

April 7, 2009, 04:26 PM	#2
a7mmnut Junior member Join Date: February 27, 2009 Location: NC Foothills Posts: 1,150	Savage 220 1947-1965. Unable to find a Stevens equivalent model. Prices vary, depending upon availability. -7- Last edited by a7mmnut; April 7, 2009 at 04:29 PM. Reason: spelling

April 7, 2009, 07:42 PM	#3
PetahW Senior Member Join Date: September 19, 2008 Posts: 4,678	The design of the stock's PG looks older - from the 1930's IMHO. IIRC, M220's have been made since at least 1938 - but replacement wood for any of the hammergun series (94/944, 104/105/107) from Numrich Arms should also fit. http://www.e-gunparts.com/products.a...=089Zz220A&MC= . Last edited by PetahW; April 7, 2009 at 07:53 PM.

April 8, 2009, 07:28 AM	#4
jaguarxk120 Senior Member Join Date: February 28, 2008 Location: Michigan Posts: 2,620	Stevens made a model 182 break open hammerless shotgun. The model series ran from 182, 185, 190, and 195, each model a higher grade. The stock should be checkered and what they call trap grade.

April 8, 2009, 07:52 AM	#5
PetahW Senior Member Join Date: September 19, 2008 Posts: 4,678	FWIW, This is Numrich's parts listing for the Stevens 180 hammerless series: http://www.e-gunparts.com/products.a...HAMMERLESS&MC= They list no wood, but have forend iron, etc. .