|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 26, 2018, 10:49 PM | #1 |
Senior Member
Join Date: December 27, 2017
Posts: 460
|
Savage 30-06 take off barrel
I see that I can get an un-fired savage 30-06 takeoff barrel for $85. It is a 22 inch barrel. Would it be worth the trouble? Is the factory barrel of good quality? Are they 2 MOA barrels?
|
February 26, 2018, 11:12 PM | #2 |
Senior Member
Join Date: December 29, 2010
Location: Shoshoni Wyoming
Posts: 2,713
|
I have shot a lot of Savage 100s (and it's variants) that shoot a LOT better than 2 MOA.
In fact 1/2 to 3/4 MOA is just expected for most of them. |
February 27, 2018, 01:12 PM | #3 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,063
|
It should be, but if the owner took it off because he didn't like the way it shot, then I'd be cautious. Any maker can screw up from time to time. But if he was just changing to a different chambering, it's probably OK. The .308 barrel on my rifle tended to pick up a lot of copper, as occasionally happens in mass production, too. I cured that by firelapping, but I mention it only to remind you this is a production barrel and not a hand-lapped custom barrel. Here's a comparison of a Savage factory and a Criterion barrel in the same gun.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
February 27, 2018, 01:37 PM | #4 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
$85 sounds decidedly light to me.
This sound familiar? "Blued – Small Shank – Sporter" NSS? Those barrels are relatively light weight barrels that they're trying to get rid of. Kind of short for .30-06, but they're mostly about the end weight of the rifle. MOA has nothing to do with it though. And Savage is well known for their out of the box accuracy.
__________________
Spelling and grammar count! |
February 27, 2018, 01:48 PM | #5 |
Senior Member
Join Date: December 27, 2017
Posts: 460
|
Yeah... a 30" bull barrel no less. I don't think I would want to pack that on my shoulder for too long. The barrel I speak of is an unfired take off sold by a custom barrel maker. If I could slap it on and shoot 1 MOA without much hassle I think it would be worthwhile. As HiBC and others have suggested it IS a hunting rifle. I prefer a head or neck shot if it is reasonable so the kill is painless for the animal so I would like the smaller group. I am thinking that it might be worth the $85 to break in a barrel right and get a fresh start. It would suck if it still shoots the same though.
|
February 27, 2018, 02:30 PM | #6 |
Senior Member
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
|
I have had two of what I call the pencil barrels. 30-06 and a 270 (still have the 270 as I want to play with it)
Both were actions I put a heavy barrel on, so I sold them. $85 is about right if you want that style a barrel. Certainly no more. Neither one shot all that well but they did snoot under 2 MOA. I had an original Savage Varmint Profile (close to a bull) that shot well. I would call them ok hunting, both got wild after a third shot. I don't like the new lightweight barrels. Carried a M77 all the years I hunted and did not feel I was burdoned.
__________________
Science and Facts are True whether you believe it or not |
February 27, 2018, 03:00 PM | #7 |
Senior Member
Join Date: December 27, 2017
Posts: 460
|
That is my gun. First two shots after cleaning will often be touching. Then they grow. Maybe I should load for that first shot and always clean before the hunt. Actually my last deer was a clean gun. Shot him between the eyes.
|
February 27, 2018, 04:25 PM | #8 |
Senior Member
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
|
Whatever gives you first shot constancy, second one close. After that its almost not a factor, either you got it or its gone.
So far the 270 shoots in one spot, shifts over and puts two about 1.5 inches away. Ok for hunting but doesn't give you a warm fuzzy. I would prefer the first two closer to each other.
__________________
Science and Facts are True whether you believe it or not |
February 27, 2018, 05:17 PM | #9 | ||
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Quote:
Quote:
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
||
February 27, 2018, 05:34 PM | #10 |
Senior Member
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 3,609
|
I any of my Savages ever ended up shooting as large a group as 2 MOA, i'd sell it to Scorch lickety split.
: |
February 28, 2018, 01:12 AM | #11 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
I don't buy Savages.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
February 28, 2018, 06:25 AM | #12 |
Senior Member
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 3,609
|
Try it.
You'll like it.. : |
February 28, 2018, 09:45 AM | #13 |
Senior Member
Join Date: November 13, 2006
Posts: 8,286
|
Its your rifle,your money,your priorities.
I can't answer your question. Write down what it is you have...your rifle,current barrel. Write down your current rifle's perceived shortcoming. Write down your perceived need,like what MOA do you want. What are the odds the new barrelwill do it.? Write down your resouces and what it will cost.Are you going to do it or have it done by your gunsmith "buddy"? Do you have a headspace gauge?Do you have the tools to R+R the barrel without twisting the receiver rails? At some point you make a decision. Then you live with it. Now,the details of what I'm going to say next are none of my business.I'm not asking questions. You mentioned you already spent all your money on this rifle. With all due respect,you have mentioned a Wife. I'll stop there. Once again,bench groups don't mean that much. How are you in a field position? Ammo is expensive. If you shoot $85 worth of powder,primers,bullets and brass, will you have more fun? Shoot better than changing barrels? I can't answer those questions,and your answers are none of my business. Sleep on it. |
February 28, 2018, 10:49 AM | #14 |
Senior Member
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
|
The interior condition of the barrels is not an aspect of accuracy, or more accurately (pun intended) accuracy down to 1/2 MOA.
A rough barrel can shoot and do often in Savage shoot just fine, certanly sub 3/4 MOA. A fine finished barrel can shoot poorly. Savage does not lap their barrels, they do use button rifling equipment (which is what most of the mid level barrel makers use) Odds of a poor Savage barrel are higher as they mass produce and they do straiten bent ones (which was the norm for a long time) Criterion, Shilen, Xcaliber etc have higher quality standards, they don't let a bent barrel through, they do lap them somewhat (Xcaliber less so) I like my Shilen barrel the best, its nicely finished. Lother Walther is also well finished. Xcaliber not as good at least when I got it. While I don't have a Criterion Barrel, the reports on function and finish match up with what I see in my Shilen barrel. You can go Barlein or Lilja etc that cut rifle barrels. I don't think I am capable of taking advantage of what they offer. The nicer finished barrels are a lot easier to clean (or clean up quicker)
__________________
Science and Facts are True whether you believe it or not |
February 28, 2018, 10:55 AM | #15 | |
Senior Member
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
|
Quote:
If I had one of the Cabelas 12FV or 10T models, I would shoot that barrel and see how it does. In the case of the 30-06, I got a stock and a rail with the gun which is all I wanted and I put a Bull Shilen on it. I didn't shoot the pencil barrel other than to confirm the action worked correctly. I also have a 270 that I bought as the rifle was on a very good discounted sale, the barrel is off and its now a 7.5 x 55 Swiss. As noted they usually are good enough hunting barrels and no one buys them for target work.
__________________
Science and Facts are True whether you believe it or not |
|
February 28, 2018, 02:30 PM | #16 |
Senior Member
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 4,556
|
Any NTO Savage barrel is fine for hunting accuracy. Never heard of them making a 30" bull in .06, sounds like it would have needed to come from a target rifle for a barrel that long.
In any case, even if you cut it, its still going to be one heavy telephone pole to lug around in the field. I'd keep looking for a lighter and shorter contour for a hunting application.
__________________
Remington 700/Savage Rebarreling /Action Blueprinting 07 FFL /Mosin-Nagant Custom Shop/Bent Bolts Genuine Cerakote Applicator www.biggorillagunworks.com |
February 28, 2018, 06:47 PM | #17 |
Senior Member
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
|
Just to clarify, its a 26 inch bull and it is a target setup only.
Its an MO for type of Savage owner that buys the gun because you can change the barrels yourself with about $100 to 150 in tools (one time investment). The taken off barrels go up for sale on Ebay and Gunbroker. Those are usually the 22 inch pencil barrels.
__________________
Science and Facts are True whether you believe it or not |
February 28, 2018, 09:39 PM | #18 |
Senior Member
Join Date: December 27, 2017
Posts: 460
|
My existing barrel is a 22 inch.
|
March 1, 2018, 10:49 AM | #19 | |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,063
|
I somehow hadn't registered in my last post that you had said "unfired". 22" is a good length, IMHO. Very close to the 21¾" optimum from the Houston Warehouse experiments.
Quote:
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
|
March 1, 2018, 02:11 PM | #20 |
Senior Member
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
|
What produces a finished inside is lapping afterwards.
Savage is not a custom barrel maker and they do it as fast as they can with what they consider acceptable results. It works well overall. They will replace a barrel if its a bad one. The button rifling process leaves chatter marks in the groves. Those are from really ugly to no so bad depending on how worn the button is) Other than cleaning being harder and some copper build up in the chatter dips, works pretty good.
__________________
Science and Facts are True whether you believe it or not |
March 1, 2018, 04:41 PM | #21 | ||
Senior Member
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 4,556
|
In post #1, you mentioned a 22" barrel...
Then post #5, a 30" barrel... Quote:
Quote:
__________________
Remington 700/Savage Rebarreling /Action Blueprinting 07 FFL /Mosin-Nagant Custom Shop/Bent Bolts Genuine Cerakote Applicator www.biggorillagunworks.com |
||
March 1, 2018, 05:10 PM | #22 |
Senior Member
Join Date: December 27, 2017
Posts: 460
|
The link on post #3 was to a 30" bull barrel. Mine has alwas been a 22". When I'm at the bar it's a 36'! RC20 said he has a 26". I beleive that was in reference to his 270. When life gets tough sometimes it is best to move on...
|
March 2, 2018, 03:25 PM | #23 |
Senior Member
Join Date: April 10, 2008
Location: Alaska
Posts: 7,014
|
tobnr:
The lengths got mixed up. My bull is 26 inches. YS: 30 inches. Standard length for the Savage ligh6 weight hunting rifle (barrels only, the action is the same) is 22 inches these days.
__________________
Science and Facts are True whether you believe it or not |
March 2, 2018, 05:26 PM | #24 |
Senior Member
Join Date: December 27, 2017
Posts: 460
|
I heard the Canadians pretty much cornered the market on take off barrels.
|
March 3, 2018, 10:26 AM | #25 |
Senior Member
Join Date: December 27, 2017
Posts: 460
|
Going back through all of my load history I am finding that this gun likes to shoot a bullet with a short jump through a freshly cleaned barrel. Many of my fouling shots are touching... 165 SST seated .005" off had a 1/2" group. 180 SST seated .005" off had a 3/4" group. 180 seated .010" off had 3 different 1" groups. The only catch with this is that I can't shoot higher velocities without big pressure spikes. I will say that the Speer 2052 (180 SPBT) does not have as big of pressure signs seated close as the SST's. The COL of the Speer bullet to the lands is .040" longer and there isn't much neck holding onto them.
Once the barrel is fouled the load tweaking and seating depth are finicky and hard to duplicate. I think that maybe I should load and sight in for first shot accuracy. What a pain to have to clean it before each shot.... But shooting that deer between the eyes was quite satisfying. Last edited by Yosemite Steve; March 3, 2018 at 10:33 AM. |
|
|