The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools Search this Thread
Old December 13, 2022, 12:57 PM   #1
a34
Junior Member
 
Join Date: February 1, 2015
Posts: 6
Need help identifying a revolver and production date

Gents,

I was at the LGS today and this gentleman walked in with a pistol to sell. The LGS passed on it at $60 stating that was the going price for one in this condition and advising the seller to put it online. I told him I'd give $60 for it, and I brought it home, complete with holster. I can't find much info on it online. I'm hoping someone here can help ID the pistol. The butt says H&R, Worcester, MA. and the top of the frame says .32 S&W, and has a 4" barrel. I think it's a Victor model due to the unfluted cylinder. Any ideas on what she is? Did I get rooked?

Looking closer at it, it appears the front sight and cylinder pin have been changed. And what's up with the loading gate? Never seen something like that.

This has a 53,xxx serial number. Anyone have any manufacturing timeline data? I couldn't find anything online.

Thanks in advance!
Attached Images
File Type: jpeg H&R (2).jpeg (959.0 KB, 151 views)
File Type: jpeg H&R.jpeg (591.7 KB, 109 views)
a34 is offline  
Old December 13, 2022, 01:41 PM   #2
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 17,958
Vorisek does not get into serialization of those early solid frame H&Rs, but that might well be a 19th century revolver.

The loading gate looks homemade and it probably came along the same time as the sight and base pin.
Jim Watson is offline  
Old December 14, 2022, 05:39 PM   #3
a34
Junior Member
 
Join Date: February 1, 2015
Posts: 6
Thanks!
a34 is offline  
Old December 31, 2022, 01:51 PM   #4
a34
Junior Member
 
Join Date: February 1, 2015
Posts: 6
12/31/22 - Update on my little H&R. I shot a box of 50 through it the other day. It shoots high, or at least I shoot high with it. It’s very pleasant to shoot with no recoil. A little loud, you definitely need ear plugs, but not too bad without them. It was hard to see the front sight and I had to keep pointing it to the side at my white target to reacquire the front sight and then back on target. That’s due to my old eyes, not the pistol, a little bit of white paint on the front sight would help me. After a couple of cylinders, I was able to get rounds on target at 7 and 15 yards shooting offhand, left, right and both hands. At 25 yards, I missed completely. The grips are a little small for my liking. I think if I lived in the 1920’s or 30’s and wanted an EDC, I’d carry something else. 1911 Maybe?

I noticed after the first couple of cylinders that it didn’t want to work in SA mode. I had to shoot in DA mode. And at some point, one of the frame pins almost worked itself out. I noticed it towards the end of shooting and was able to push it back in. All in all, still happy I bought it. It’s a nice addition to the collection.
Attached Images
File Type: jpg H&R targer.JPG (47.2 KB, 46 views)
File Type: jpg H&R revolver.JPG (58.1 KB, 40 views)
a34 is offline  
Old January 17, 2023, 09:51 AM   #5
Jeff_French
Junior Member
 
Join Date: October 22, 2022
Posts: 2
Your revolver appears to be an H&R Victor built on the #3 American frame. It should be roll marked:
https://thefiringline.com/forums/att...1&d=1673966667
I think I can see in your last pic where the word VICTOR has been removed.

At any rate, it was produced in the era 1915 - 1928. Yours has a very late serial number and would be a late production model.

The Victor models were never cataloged.

I agree with you on the front sight and base pin.

The loading gate is non-original to this revolver.

This model was made for the .32 S&W Long.

I hope this is helpful.
Jeff
Attached Images
File Type: jpg 9.jpg (37.7 KB, 17 views)
__________________
Walk softly, but carry.

Last edited by Jeff_French; January 17, 2023 at 10:04 AM.
Jeff_French is offline  
Reply

Tags
h&r .32 , victor

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.06487 seconds with 11 queries