|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 29, 2008, 01:03 PM | #1 |
Senior Member
Join Date: February 3, 2007
Location: Western NY
Posts: 598
|
Hottest standard large rifle primer
In my Lyamn's manual it shows Winchester as the hottest, CCI 200 and Federal 210/210M in the middle, and Remington 9 1/2 as the mildest. They based those finding on308 win. test load where they only changed primers.
Does your experiances agree with Lyman's findings? |
January 29, 2008, 04:26 PM | #2 |
Senior Member
Join Date: December 29, 2007
Location: Northern Ky
Posts: 254
|
Have used all of them...now only use Federal 210 or 215's. All I read is the Federals are the hottest.
|
January 29, 2008, 04:30 PM | #3 |
Senior Member
Join Date: February 3, 2007
Location: Western NY
Posts: 598
|
The guy I buy my components from said the same thing
|
January 31, 2008, 11:08 PM | #4 |
Senior Member
Join Date: June 4, 2007
Location: Upstate SC
Posts: 1,943
|
If you use extruded powders, you can get by with a milder primer because the grains of powder have space around them allowing the flash to swirl a bit and ignite the powder easier. Most (but not all) ball powders benefit from a hotter primer because the flame column doesn't swirl around the grains. The Federal primers are supposed to be the hottest. SAAMI SHOULD make a list of the brisance of currently available primers, but they don't. Probably the only way to get a list would be to contact the BATFE. They would know if anyone does, but getting the list might prove to be problematic.
__________________
If you want your children to follow in your footsteps, be careful where you walk. Beware the man that only owns one gun; he probably knows how to use it. I just hope my ship comes in before my dock rots. |
February 1, 2008, 01:51 PM | #5 |
Senior Member
Join Date: May 13, 2006
Location: WA, the left armpit of the USA
Posts: 1,323
|
I'm not interested in "hottest" which is a pretty much meaningless term. I'm interested in "most consistent" which will yield the most uniform ignition across a number of rounds. After all, accuracy is all about getting several bullets to hit the same target in the same place.
Primers that all contain the same amount of stryphate, that have anvils set to the same depth,,,,,etc do something for accuracy. After trying all the brands over a lot of rounds and a lot of years, for general use I use Federal standard primers. For match rounds I use their gold medal primers and yes, I do weigh each and every match primer.
__________________
"If the enemy is in range, so are you." - Infantry Journal |
|
|