The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old March 6, 2009, 04:39 PM   #1151
brolin_1911a1
Member
 
Join Date: November 23, 2006
Location: West Plains, MO
Posts: 16
Quote:
The serial number is 604Jxx. Any idea when that was made?
1971/72.

Jim

Thanks, Layton.
brolin_1911a1 is offline  
Old March 7, 2009, 11:13 AM   #1152
rsnetid
Junior Member
 
Join Date: March 7, 2009
Posts: 1
I just purchased a 38 S&W Special CTG #D689xx. Can you please tell me the date it was manufactured and if it will take +P loads? This is a heavy barrel model.

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
rsnetid is offline  
Old March 7, 2009, 05:41 PM   #1153
Twinvee20
Junior Member
 
Join Date: March 7, 2009
Posts: 1
Model 36 age

HI,

I'm new to the forum, what a great place. I was wondering if you could date a model 36 I recently inherited from a friend who passed. The serial number is J631XXX.

Thanks in advance.
Twinvee20 is offline  
Old March 7, 2009, 06:04 PM   #1154
RICHCOP1966
Junior Member
 
Join Date: March 7, 2009
Posts: 1
Can anyone give me info on a S&W revolver. My father past away 2 years ago and my mother did not know he had this gun. She recently found it and wanted it out of the house. Model 36 58Jxxx THANK YOU.

Last edited by RICHCOP1966; March 8, 2009 at 07:21 AM.
RICHCOP1966 is offline  
Old March 7, 2009, 06:23 PM   #1155
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I just purchased a 38 S&W Special CTG #D689xx. Can you please tell me the date it was manufactured and if it will take +P loads?
1968. Your model 10 should be fine with +P.

Quote:
I was wondering if you could date a model 36 I recently inherited from a friend who passed. The serial number is J631XXX.
1977/78.

Quote:
Can anyone give me info on a S&W revolver. My father past away 2 years ago and my mother did not know he had this gun. She recently found it and wanted out of the house. Model 36 58Jxxx
1971/72.

Jim
laytonj1 is offline  
Old March 9, 2009, 09:50 PM   #1156
Vadim Shapiro
Junior Member
 
Join Date: March 9, 2009
Posts: 1
help w/ a S&W

Hey Guys, i just found this revolver at my grandfathers house, it looks really old and all i can get from it is the serial number. If anyone has a way of telling what kind it is/when it was made i would really appreciate it. Its a 228XXX, There are only numbers no letters. ive also included a picture.

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
Vadim Shapiro is offline  
Old March 9, 2009, 10:29 PM   #1157
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Hey Guys, i just found this revolver at my grandfathers house, it looks really old and all i can get from it is the serial number. If anyone has a way of telling what kind it is/when it was made i would really appreciate it. Its a 228XXX, There are only numbers no letters. ive also included a picture.
If it's 32 S&W caliber it would be a .32 Double Action 4th Model with serial numbers running from 43406 in 1883 to 282999 in 1909.
If it's 38 S&W caliber then it's a .38 Double Action 3rd Model with serial numbers running from 119001 in 1884 to 322700 in 1895.

Jim
laytonj1 is offline  
Old March 9, 2009, 11:02 PM   #1158
Rokky
Junior Member
 
Join Date: February 8, 2009
Location: California
Posts: 14
Date of Birth Mod 15-4

I would like to know when my S&W 38spl was born.
It is a Model 15-4 and the first part of the Serial # is ADU9.
Thanks.
Rokky is offline  
Old March 10, 2009, 03:22 AM   #1159
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Rokky: your revolver serial number falls between ADT3000 (January 1984) & AEV9999 (November 1984). Strangely, the 15-4 was introduced in 1977 and replaced by the 15-5 in 1982, so either some old frames were being used up in 1984 or yours was stamped out of sequence sometime between 1980 with the introduction of the AAAxxxx serial range and the official discontinuation of the 15-4 in 1982.
Radagast is offline  
Old March 10, 2009, 07:51 AM   #1160
gurn
Junior Member
 
Join Date: March 10, 2009
Posts: 7
Need Help ID revolver

I was given a S&W revolver six shot that is in pretty good shape. I can't find a model number anywhere on it. It's got a short barrell and has a crown and BNP stamped on it. The serial number is 8393XX. Any help would be appreciated. Thanks
gurn is offline  
Old March 10, 2009, 11:14 AM   #1161
The Captain
Junior Member
 
Join Date: March 10, 2009
Posts: 13
Info on 2 revolvers

I have two revolvers I would like to date.

A pre-model 10 (I think, there is no model number on the crane; .38 special, 6 round cylinder, fixed sights, 4" pencil barrell) My father acquired this in the mid-late '60's, it may be a former NYPD gun, but is not marked in anyway that I can tell. Serial number #C4005xx.

Also, a model 36-1, #J6412xx. LNIB, with all papers, but no tools.

Are these guns +P safe? Any estimate on value?

Thanks in advance.

Last edited by The Captain; March 10, 2009 at 12:06 PM. Reason: add info
The Captain is offline  
Old March 10, 2009, 11:25 AM   #1162
Rokky
Junior Member
 
Join Date: February 8, 2009
Location: California
Posts: 14
Radagast,
I bought the gun new in the early 80's, but just can't remember exactly when. I have all the tags and the box, but can't find the receipt. I knew they discontinued the model 15 sometime after I bought it.
Believe it or not the gun has never been fired. I got it for home defense and just never got around to trying it out. Just take it and clean it ever do often.
I have been trying to find a S&W build date chart for this model, but had no luck.
Thanks for the info.
Rokky is offline  
Old March 10, 2009, 01:52 PM   #1163
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Rokky: your revolver serial number falls between ADT3000 (January 1984) & AEV9999 (November 1984). Strangely, the 15-4 was introduced in 1977 and replaced by the 15-5 in 1982, so either some old frames were being used up in 1984 or yours was stamped out of sequence sometime between 1980 with the introduction of the AAAxxxx serial range and the official discontinuation of the 15-4 in 1982.
I'm curious, is the barrel pinned? 15-5 in 1982 was the elimination of the pinned barrel.
Quote:
I have all the tags and the box, but can't find the receipt. I knew they discontinued the model 15 sometime after I bought it.
Just an FYI, the model 15 was not discontinued until 1999 and then brought back in 2001 as a Performance Center gun with the Heritage Series.

Quote:
I was given a S&W revolver six shot that is in pretty good shape. I can't find a model number anywhere on it. It's got a short barrell and has a crown and BNP stamped on it. The serial number is 8393XX. Any help would be appreciated. Thanks
Caliber as stamped on the barrel?

Quote:
A pre-model 10 (I think, there is no model number on the crane; .38 special, 6 round cylinder, fixed sights, 4" pencil barrell) My father acquired this in the mid-late '60's, it may be a former NYPD gun, but is not marked in anyway that I can tell. Serial number #C4005xx.

Also, a model 36-1, #J6412xx. LNIB, with all papers, but no tools.

Are these guns +P safe? Any estimate on value?
C4005XX = ~1957. Pre model marked guns (pre 1958) are not recommended for +P. Value depends on condition, $250 well used to about $450 in like new.
J6412XX = 1977/78. Okay with +P. 36's are in demand so I'd say $350 to $400 in excellent condition.

Jim
laytonj1 is offline  
Old March 10, 2009, 03:21 PM   #1164
The Captain
Junior Member
 
Join Date: March 10, 2009
Posts: 13
Quote:
A pre-model 10 (I think, there is no model number on the crane; .38 special, 6 round cylinder, fixed sights, 4" pencil barrell) My father acquired this in the mid-late '60's, it may be a former NYPD gun, but is not marked in anyway that I can tell. Serial number #C4005xx.

Also, a model 36-1, #J6412xx. LNIB, with all papers, but no tools.

Are these guns +P safe? Any estimate on value?

C4005XX = ~1957. Pre model marked guns (pre 1958) are not recommended for +P. Value depends on condition, $250 well used to about $450 in like new.
J6412XX = 1977/78. Okay with +P. 36's are in demand so I'd say $350 to $400 in excellent condition.
Thanks, Jim. That's about what I thought, especially about the +P.
The Captain is offline  
Old March 10, 2009, 05:00 PM   #1165
Rokky
Junior Member
 
Join Date: February 8, 2009
Location: California
Posts: 14
laytonj1,
I don't see any pin in the barrel.
It looks as though it is screwed in. just my opinion.
When I open the cylinder and look at the frame there is the serial number and directly below that is the number 15-4.
Now, on the hinge that the cylinder is attached to there is the 5 digit number 79XXX.
The 5th digit is a smaller number then the first 4.
Then, over that entire number is stamped a B4 that is larger then the 5 digit number.
The serial number of the gun also appears on the butt of the hand grip.
This is all the numbers that I can find.
Rokky is offline  
Old March 10, 2009, 05:08 PM   #1166
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Rokky,

A 15-4 without a pinned barrel (single pin thru the frame and barrel were barrel attaches to frame) and made in 1984 (per SN ADU9XXX).
Odd.

The other numbers are assembly numbers.

Jim
laytonj1 is offline  
Old March 10, 2009, 05:28 PM   #1167
curtmac
Junior Member
 
Join Date: March 10, 2009
Posts: 4
Smith & Wesson .38 3707xx
curtmac is offline  
Old March 10, 2009, 06:09 PM   #1168
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Smith & Wesson .38 3707xx
5 shot or 6 shot? Any letter prefix's with the serial number? Modern swing out cylinder?

Jim
laytonj1 is offline  
Old March 10, 2009, 06:18 PM   #1169
Rokky
Junior Member
 
Join Date: February 8, 2009
Location: California
Posts: 14
laytyonj1
Maybe mine is one of those rare oddities that slipped through the cracks.
I bought it from a store that sells to LEO's so maybe that could have some bearing on this mystery.
Rokky is offline  
Old March 10, 2009, 06:26 PM   #1170
curtmac
Junior Member
 
Join Date: March 10, 2009
Posts: 4
5 shot, pops empty shells out of the chamber when you break it open and flip the cylinder and barrel forward. has about a 3" barrel as a guess. no prefix

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
curtmac is offline  
Old March 10, 2009, 06:49 PM   #1171
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
5 shot, pops empty shells out of the chamber when you break it open and flip the cylinder and barrel forward. has about a 3" barrel as a guess. no prefix
Pictures make all the difference!
.38 Double Action 4th Model. Serial numbers ran from 322701 in 1895 to 539000 in 1909.

Jim
laytonj1 is offline  
Old March 10, 2009, 06:51 PM   #1172
curtmac
Junior Member
 
Join Date: March 10, 2009
Posts: 4
omg didn't know it was that old. Thanks Jim
curtmac is offline  
Old March 10, 2009, 07:00 PM   #1173
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
curtmac: You have a S&W .38 Double Action 4th Model. Manufactured in the serial number range 322701 to 539000 between 1895 & 1909, those manufactured before serial number 382022 in 1898 are considered antiques by the BATF. Best guess is your gun was made in 1887.
Radagast is offline  
Old March 10, 2009, 07:10 PM   #1174
curtmac
Junior Member
 
Join Date: March 10, 2009
Posts: 4
I got it from an auction, was in the bottom of a box of old knifes and some handbooks. any idea on a value? it's a bit rough on the handle, looks like a stainless finish but is worn.
curtmac is offline  
Old March 10, 2009, 07:12 PM   #1175
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Gurn: Best bet on your gun that is a K200 British Service Revolver, built on the Military & Police frame. The BNP stamp stands for British Nitro Proof, these were made during WWII for the British military, main barrel length is five inches, but four and six have been recorded. Serial number range was 700,000 to 1,0000,000, when the serial number changed over to the Vxxxxxxxxx range, V being for Victory. There is no model number because it pre-dates model numbers which were introduced in 1957. Effectively the K200 is an early variant of the model 10.

K200s where chambered for the British 200 grain .38 S&W round, modern 145 grain S&W ammo can be fired through them. After the war many of these were converted to .38 special by boring through the chambers. Because the case head (and hence chamber) of the .38 S&W is wider than the .38 special, .38 special cases may bulge or crack if fired in a converted gun. If yours is converted I suggest you only fire standard pressure ammunition through it. The shortened barrel suggests it may be a conversion.
Radagast is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.48031 seconds with 9 queries