The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old August 21, 2012, 05:14 PM   #5626
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I would like to know if in your opinion it would be safe to shoot with modern ammunition?
44 Special ammo hasn't changed over the decades so as long as the gun is in good shape it should be safe to shoot.

Quote:
a patent date of 04 and on the bottom of the grip the numbers 7806 and if you turn the gun around it could read 9084.
It's a 32-20 Hand Ejector. Both those numbers are to low for a 1904 patent date.
Check the rear underside of the barrel for a matching serial number.

Quote:
I talked him down too $300, would you say it was a good deal or did I get taken?
Uhh, yeah. Unless it was sitting at the bottom of a lake for awhile, that's a great deal!

Jim
laytonj1 is offline  
Old August 21, 2012, 05:49 PM   #5627
Papawof2
Junior Member
 
Join Date: August 21, 2012
Posts: 4
There is a matching number on the underside of the barrel (7806). I think there are earlier patient dates but the 04 is the only one my old eyes can read. It is in very good shape and looks very nice. This was my Grandads coon hunting gun when I was a boy. My job was to hold the flashlight over his sholder.
Papawof2 is offline  
Old August 21, 2012, 05:50 PM   #5628
Papawof2
Junior Member
 
Join Date: August 21, 2012
Posts: 4
There is a matching number on the underside of the barrel (7806). I think there are earlier patient dates but the 04 is the only one my old eyes can read. It is in very good shape and looks very nice. This was my Grandads coon hunting gun when I was a boy. My job was to hold the flashlight over his shoulder.
Papawof2 is offline  
Old August 21, 2012, 06:14 PM   #5629
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Well, the matching serial numbers date it as a 32-20 Hand Ejector Model of 1902.
Serial numbers ran from 5312 in 1902 to 9811 in 1905.

Jim
laytonj1 is offline  
Old August 21, 2012, 06:52 PM   #5630
willyt52
Junior Member
 
Join Date: July 29, 2012
Posts: 9
Mod 36 no dash SN Inquiry

I dug out the family S and W that has been handed down to me. It is SN 593xxx

Looking for information on the manufacture date

Thanks,

Willy T
willyt52 is offline  
Old August 22, 2012, 04:46 PM   #5631
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
SN 593xxx
Serial numbers ran from 295000 in 1962 to 786544 in 1969.

Jim
laytonj1 is offline  
Old August 22, 2012, 06:01 PM   #5632
willyt52
Junior Member
 
Join Date: July 29, 2012
Posts: 9
thanks Jim
willyt52 is offline  
Old August 22, 2012, 07:50 PM   #5633
warwagon
Senior Member
 
Join Date: November 7, 2005
Location: Dayton Oh
Posts: 341
Mod 10

A friend recently acquired a S&W K frame 2" revolver that the original sales bill states as a Model 10. It is a square butt configuration.

Inspection of the cylinder crane only reveals the #84479, no typical model number(I believe I have read that would be referred to as an assembly number,but I'm not sure of that).

The serial number is C3308XX.

It has me intrigued due the square but configuration, and the lack of a model number on the crane.

Thanks for any help in advance,

warwagon

Last edited by warwagon; August 22, 2012 at 08:08 PM.
warwagon is offline  
Old August 22, 2012, 11:03 PM   #5634
Zuker
Junior Member
 
Join Date: August 17, 2012
Posts: 2
Thanks in advance

After reading many of your posts and replies ,It seems as though there is lottsa good info... So can the serial number on my revolver help me determine it's worth and date of manufacture. I've had it about 30 years so here goes.
Thanks again.
J6041xx
It has a blued finish ,


Jim
Zuker is offline  
Old August 22, 2012, 11:09 PM   #5635
Zuker
Junior Member
 
Join Date: August 17, 2012
Posts: 2
Thanks in advance

I'm sorry it is a 38
Don't know the model
Jim
Zuker is offline  
Old August 23, 2012, 06:32 PM   #5636
ggates
Junior Member
 
Join Date: August 23, 2012
Posts: 1
S&W 629

Hello, looking on help determining the date of manufacture / model variant (629-?) of a stainless, 6 1/2 in barrel 629. Serial number CPE8xxx

Any help is appreciated. Thank you.
ggates is offline  
Old August 23, 2012, 07:29 PM   #5637
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
The serial number is C3308XX
It's a 38 Military & Police.
Serial numbers ran from C277555 in 1954 to C402923 in 1956.
Model numbers did not start until 1957, at which time it became the model 10.
If the original sales receipt says model 10 on it then the gun did not sale until post 1956 although it was made earlier.
Square Butt was the standard configuration for that time period.

Quote:
J6041xx
1977.
The model number is stamped on the frame just in front of the cylinder. It's only visable with the cylinder open. It would be either a model 36, 37 or 38.
$300 to $400 depending on condition.

Quote:
Serial number CPE8xxx
That SN would be post 2004, the lastest date the SCSW covers.
S&W customer service will give you the DOB over the phone for free.

Jim

Last edited by laytonj1; August 23, 2012 at 07:35 PM.
laytonj1 is offline  
Old August 23, 2012, 09:20 PM   #5638
warwagon
Senior Member
 
Join Date: November 7, 2005
Location: Dayton Oh
Posts: 341
Jim,

Thanks very much for the info, we had guessed that about right.

I remember back when I went "on the job", that the 10 snub was very popular with the detectives, and a lot off duty carry. I had an earlier 4" version that I started out with.
warwagon is offline  
Old August 24, 2012, 11:52 AM   #5639
Papawof2
Junior Member
 
Join Date: August 21, 2012
Posts: 4
Well, the matching serial numbers date it as a 32-20 Hand Ejector Model of 1902.
Serial numbers ran from 5312 in 1902 to 9811 in 1905.

I am going to leave my guns to my grandsons and I know the value of them except this one. Any idea as to the value as I want to split as evenly as possible. I'd say the revolver is a 9 out of 10 scale for condition.
Papawof2 is offline  
Old August 24, 2012, 07:37 PM   #5640
Inverness11
Member
 
Join Date: January 22, 2006
Location: Indiana
Posts: 35
Anyone know about a Model 64, S/N BSN60xx? Thanks!!!!
Inverness11 is offline  
Old August 25, 2012, 12:51 PM   #5641
leeterry
Junior Member
 
Join Date: August 25, 2012
Location: Lombard, IL
Posts: 1
Smith & Wesson K 22

I have a dilemma I been a FFL now for 31 years and have always Sold to my Customers at a good price
I bought this S&W last night I know it is a pre Model My Guess is the Pre K 22 Serial number is 282XXX
Perfect 100 % Condition Bluing is Perfect see pictures now here is my major question if anyone has come across one of these I only seen 2 in 31 years the blue Book says
PRE-WAR Pre K-22 MASTERPIECE at 80% which I rate this one is at $3,200
K-22 OUTDOORSMAN - K-22 1st MODEL at 80% $1,375
I am trying to be correct smith & Wesson historian Roy Jinks is a Personal friend of mine is out of town he could answer this in 5 min the man is great
Any Idea’s Guys it will be greatly appreciated

http://www.flickr.com/photos/8579936...in/photostream

http://www.flickr.com/photos/8579936...in/photostream

http://www.flickr.com/photos/8579936...in/photostream

http://www.flickr.com/photos/8579936...in/photostream

http://www.flickr.com/photos/8579936...in/photostream

http://www.flickr.com/photos/8579936...in/photostream

Last edited by leeterry; August 25, 2012 at 04:16 PM. Reason: Roy Jinks called me it is a k22 thanks all
leeterry is offline  
Old August 25, 2012, 02:06 PM   #5642
sgtpepper
Member
 
Join Date: April 26, 2009
Location: Stockholm, Sweden
Posts: 42
I've come across a really nice S&W model 60 in mint condition with serial number 291xx and I'm curious when it was manufactured. Any help is appreciated!
__________________
Colt Python 6" .357M | IMI Jericho 941 9mm | CZ SP01 Shadow 9mm | Walther PP 7,65mm | Ruger MkIII | Benelli MP90S .22 | Mossberg 590 SP A1 | Remington 700 LTR .308 Win | Ruger PC Carbine | Ruger 10/22
sgtpepper is offline  
Old August 25, 2012, 03:12 PM   #5643
bglass
Junior Member
 
Join Date: August 25, 2012
Posts: 1
year made by serial number

Hello,
I am looking to identify the year a .38 S&W was made.
not sure the model number, because it is not in my hands yet.
but it is a small frame with 4" barrel and the serial number is
J575849

I would appreciate any help
bglass is offline  
Old August 25, 2012, 07:01 PM   #5644
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Papawof2,

The SCSW shows a value of $500 in Very good to $1K in Excellent.

Quote:
Model 64, S/N BSN60xx
1994/95.

Quote:
I bought this S&W last night I know it is a pre Model My Guess is the Pre K 22 Serial number is 282XXX
Perfect 100 % Condition
K282xxx dates your K-22 to 1956.
While it is in minty condition it is missing it's original grips. The ones on it are about 20 years newer and that's a big hit on the value.
That said, about $750 is my guess.

Quote:
S&W model 60 in mint condition with serial number 291xx
Take the SN from the underside of the frames grip butt. You may have to remove the grips to see it.
See pic in post #5562.

Quote:
J575849
1976/77.

Jim

Last edited by laytonj1; August 25, 2012 at 07:09 PM.
laytonj1 is offline  
Old August 25, 2012, 07:12 PM   #5645
Inverness11
Member
 
Join Date: January 22, 2006
Location: Indiana
Posts: 35
Thank you Jim!!!!
Inverness11 is offline  
Old August 27, 2012, 05:50 PM   #5646
Chuckusaret
Junior member
 
Join Date: December 5, 2008
Location: Florida
Posts: 708
While on vacation in Az. I picked up a never fired LNIB S&W nickel plated model 36 3" barrel with original box, cleaning gear, manual and assorted gun lititure. I would like to know the year of manufacture and estimated value. serial number J461xxx. Any help woul be greatly appreciated.
Chuckusaret is offline  
Old August 27, 2012, 08:57 PM   #5647
Gatorray
Junior Member
 
Join Date: August 27, 2012
Posts: 1
Hi, I'm trying to find out information on a S&W 38 Special revolver that I got from my dad years ago.

SN# S 838XXX

I would love to know when it was manufacturered.

It appears to have ivory grips, but I guess they could be synthetic.

Thanks,

Ray
Gatorray is offline  
Old August 27, 2012, 10:58 PM   #5648
possumhead
Junior Member
 
Join Date: August 27, 2012
Posts: 1
s&w 32 cal

hello new here .can anyone tell me about this gun. i have the serial # it is 239xxx
possumhead is offline  
Old August 28, 2012, 01:10 PM   #5649
raistlin12
Junior Member
 
Join Date: August 28, 2012
Posts: 1
Model 15-3 date

Going through stuff prior to a move, I ran a across a model 15-3, 4" barrel.
SN 8K1XXXX

I haven't seen any serials like that in this thread, and was wondering what I have.

Thanks in advance,
Clint
raistlin12 is offline  
Old August 28, 2012, 06:52 PM   #5650
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
serial number J461xxx
Serial numbers ran from J370001 in 1976 to J610000 in 1977.
If it's truely unfired and in 100% condition then about $600 or more depending on location and how bad a collector wants it.

Quote:
SN# S 838XXX
38 Military & Police (post war).
Serial numbers ran from S811120 in 1945 to S999999 in 1948.

Quote:
i have the serial # it is 239xxx
S&W reused serial numbers on different models many years ago so I need to figure out what model you have first.
Is it a modern swing out cylinder or an older break-top (barrel tips down to load)?

Quote:
SN 8K1XXXX
1975.

Jim
laytonj1 is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.59118 seconds with 9 queries