|
June 16, 2022, 04:00 AM
|
#1 |
|
Junior Member
Join Date: June 10, 2022
Posts: 3
|
38 lc kirst gated problem
Guys,
I have a 38LC Kirst gated for my 1851 uberti. After prox.300 shoots the firing pin fall out from the ring. I send a mail to Kirst but I didn't get any answer. Can you provide me any sugestion how to fix this problem or a photo of this part how suposed to look like. In my photo the pin is out and I don't now what hold the pin in. Thanks |
|
|
June 16, 2022, 06:12 AM
|
#2 |
|
Junior Member
Join Date: May 3, 2014
Posts: 2
|
Hello sasa0000,
Looks like your ferrule came out. It's like a set screw which holds your firing pin in place. Kirst should replace it with no problems, I'd give them a phone call. AntiqueSledMan. |
|
|
|
June 17, 2022, 06:53 AM
|
#3 |
|
Junior Member
Join Date: June 10, 2022
Posts: 3
|
Well, I'm from Croatia and I can't found any phone number. Can you give to me some contacts?
|
|
|
|
June 17, 2022, 03:23 PM
|
#4 |
|
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,491
|
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
|
|
|
June 24, 2022, 04:38 AM
|
#5 |
|
Junior Member
Join Date: June 10, 2022
Posts: 3
|
Problem solved. Thanks
|
|
|
|
June 24, 2022, 03:50 PM
|
#6 |
|
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,491
|
beer/brewski
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
|
|
 |
| Thread Tools | Search this Thread |
|
|
