Next on your wish list - Page 2

O4L · July 18, 2018, 11:05 PM

A Shield 40 to convert to 357Sig.

jonnyc · July 19, 2018, 11:43 AM

Hmmmm.........
Just from what's currently in the shop that I might buy any second:
-very early 4 digit KT P32
-been there/done that PRC SKS with a spike bayonet
-black S&W hammerless AirWeight
-Ruger Precision in .22LR
-Bulgarian Makarov
-Sig P225
Oh, and an Aero lower.....just in case.

Gotta add a beaut of a Norwegian Krag we just got in. Madly in lust!

GamestopDorito · July 19, 2018, 10:53 PM

Making my way through layaway on a CZ Bren 805. Should have it (well early) by September. Wife won't let me own a ton of guns so I'm trying to buy really fun stuff.

After that, maybe a 10mm Glock and (I'm a bit ashamed to admit) a Vector carbine or something stupid like that. Although I'm eyeing 7.62 rifles based off the G3. Those are a lot cheaper.

Skans · July 20, 2018, 10:48 AM

Quote:

Wife won't let me own a ton of guns so I'm trying to buy really fun stuff.

Quality, not quantity....I like that.

M88 · July 20, 2018, 04:30 PM

Waiting for Colt to start making their original 1873 SAA again, as they said they at some point would. I'll grab one of those in a heartbeat although they say on their website it will cost $1800... not cheap. Until then my Uberti will have to do.

craddleshooter · July 20, 2018, 07:34 PM

i am currently saving up for a STI Executive 1911 .40

kenny53 · July 20, 2018, 08:18 PM

There may be something wrong with me but at the moment there is nothing
I need and really nothing I want.

DPI7800 · July 20, 2018, 09:58 PM

Number 1 on my list is an Accuracy International AX/MC set up in 338LM with the 2 additional bolts, the additional magazine insert and magazines and 2-3 additional barrels. Probably will order first of the year.

**Shane Tuttle** · July 21, 2018, 10:45 PM

A friend of mine just bought a Springfield TRP Operator in 10mm. I'm hot-to-trot to get one myself.

Eazyeach · July 22, 2018, 06:34 AM

Well right now I have one more AR upper than I do lowers. So I’m thinking of making my spare upper into a complete rifle. So my answer is AR15 lower.

I might consider getting a spare carry gun too. S&W M&P 2.0 compact. Not very exciting I know, but I’ve got a couple guns that I’ve had awhile and still haven’t shot. So I need to rectify that issue.

WV_gunner · July 25, 2018, 09:56 AM

Forgot about the 440 Corbon, so really I’d like my next cartridge gun to be a single shot 440 Corbon pistol but my next gun will hopefully be a CVA muzzle loader pistol.

kraigwy · July 25, 2018, 10:56 AM

Modifing an Existing Rifle:

I have a lot of guns, and som are pretty dern accurate. Or I thougt so until I compaired them with my Ruger American Predator in 6.5. It will out shoot every rifle I have.

It even holds its own against my wifes Ruger Precison Rifle in 6.5. The RAP shoots my hunting rounds better.

The problem with the RAP is those littel 4 round rotary mags. Half the ones I have are defective to one point or other.

So I found out CDI makes bottom metal for the orginal RAP stock allowing it to take AI mags. They will even fit the the bottom metal to your stock if you by the BM.

I believe, for me anyway, that will make the RAP 6.5 CM the perfect rifle. Only remaining problem is it isnt a Winchester.

I already put a 20 MM rail on my RAP to increase the distance I can get with the Vortex scope. Whats better, the 20 mm rail/Vortex combo bottoms out at 100 yards.

I can easily go back to zero without finding I'm a revolution off (which I've done a couple times shooting precision rifle matches.

kmw1954 · July 25, 2018, 11:09 AM

Nothing I Need or Have to Have though there are a few I would like to add and would shoot them if I had them. One would be to replace a S&W Model 19 I traded away years ago. Then there are a couple Tanfoglio Witness that would fit nicely in a couple different calibers. Lastly for some reason an M&P Shield 45. Far down the list a S&W Model 57 41mag 6".

SmokeyLonesome · August 8, 2018, 07:33 PM

A Henry Big Boy or a Marlin 30-30.

m&p45acp10+1 · August 11, 2018, 11:51 AM

I am good to go on gun purchases for a while. I have been trying to work on keeping the ones I have fed. I may have a move coming up that will take me to the Nebraska pan handle. In that event the area is widely spread out. Also There is only like one gun store in a 55 mile range. They do not seel reloading supplies. So my latest purchases have been picking up supplies.

On my short list of wishes is a Dillon progressive press with kits for my most reloaded ammo.

mulespurs · August 11, 2018, 11:57 AM

What I want is a smaller 1911 like the browning 380 size in a 9mm.

I know that there are others like the sig 938 and more but the browning seems just right to me , just in the wrong chambering.

Cirdan · August 11, 2018, 12:14 PM

Can't decide. Down to:
Sig 238
Rock Island 1911 Government
Marlin/Henry lever in 38/357

mr bolo · August 11, 2018, 07:43 PM

probably a GLOCK 30 SF

TXAZ · August 12, 2018, 12:14 AM

GAU-19B. Something impractical but a blast to shoot:

http://www.imfdb.org/wiki/File:GAU-1...pod_stand.jpeg

https://en.m.wikipedia.org/wiki/File...GECAL_50_2.jpg

https://youtu.be/qtBhA8QPArE

http://youtu.be/qtBhA8QPArE

July 19, 2018, 11:43 AM	#27
jonnyc Senior Member Join Date: July 20, 2009 Location: PA Posts: 1,731	Hmmmm......... Just from what's currently in the shop that I might buy any second: -very early 4 digit KT P32 -been there/done that PRC SKS with a spike bayonet -black S&W hammerless AirWeight -Ruger Precision in .22LR -Bulgarian Makarov -Sig P225 Oh, and an Aero lower.....just in case. Gotta add a beaut of a Norwegian Krag we just got in. Madly in lust! __________________ 2024 PA Cartridge Collector Show; Aug. 16-17, 2024!!! Buy...Sell...Trade All Types of Ammunition & Ordnance PM or email me for 2024 show details. Last edited by jonnyc; July 19, 2018 at 09:16 PM.

July 20, 2018, 04:30 PM	#30
M88 Senior Member Join Date: February 15, 2018 Location: Pennsylvania Posts: 278	Waiting for Colt to start making their original 1873 SAA again, as they said they at some point would. I'll grab one of those in a heartbeat although they say on their website it will cost $1800... not cheap. Until then my Uberti will have to do. __________________ NRA life member. Making good people helpless doesn't make bad people harmless!

July 21, 2018, 10:45 PM	#34
Shane Tuttle Staff Join Date: November 28, 2005 Location: Montana Posts: 9,443	A friend of mine just bought a Springfield TRP Operator in 10mm. I'm hot-to-trot to get one myself. __________________ If it were up to me, the word "got" would be deleted from the English language. Posting and YOU: http://www.albinoblacksheep.com/flash/posting

July 25, 2018, 10:56 AM	#37
kraigwy Senior Member Join Date: June 16, 2008 Location: Wyoming Posts: 11,061	Modifing an Existing Rifle: I have a lot of guns, and som are pretty dern accurate. Or I thougt so until I compaired them with my Ruger American Predator in 6.5. It will out shoot every rifle I have. It even holds its own against my wifes Ruger Precison Rifle in 6.5. The RAP shoots my hunting rounds better. The problem with the RAP is those littel 4 round rotary mags. Half the ones I have are defective to one point or other. So I found out CDI makes bottom metal for the orginal RAP stock allowing it to take AI mags. They will even fit the the bottom metal to your stock if you by the BM. I believe, for me anyway, that will make the RAP 6.5 CM the perfect rifle. Only remaining problem is it isnt a Winchester. I already put a 20 MM rail on my RAP to increase the distance I can get with the Vortex scope. Whats better, the 20 mm rail/Vortex combo bottoms out at 100 yards. I can easily go back to zero without finding I'm a revolution off (which I've done a couple times shooting precision rifle matches. __________________ Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071

August 11, 2018, 11:51 AM	#40
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,930	I am good to go on gun purchases for a while. I have been trying to work on keeping the ones I have fed. I may have a move coming up that will take me to the Nebraska pan handle. In that event the area is widely spread out. Also There is only like one gun store in a 55 mile range. They do not seel reloading supplies. So my latest purchases have been picking up supplies. On my short list of wishes is a Dillon progressive press with kits for my most reloaded ammo. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

July 18, 2018, 11:05 PM	#26
O4L Senior Member Join Date: September 16, 2015 Posts: 646	A Shield 40 to convert to 357Sig.

July 19, 2018, 10:53 PM	#28
GamestopDorito Member Join Date: July 19, 2018 Location: USA Posts: 50	Making my way through layaway on a CZ Bren 805. Should have it (well early) by September. Wife won't let me own a ton of guns so I'm trying to buy really fun stuff. After that, maybe a 10mm Glock and (I'm a bit ashamed to admit) a Vector carbine or something stupid like that. Although I'm eyeing 7.62 rifles based off the G3. Those are a lot cheaper.

July 20, 2018, 07:34 PM	#31
craddleshooter Junior member Join Date: March 9, 2018 Location: NY Posts: 90	i am currently saving up for a STI Executive 1911 .40

July 20, 2018, 08:18 PM	#32
kenny53 Senior Member Join Date: December 30, 2015 Location: My back yard Posts: 971	There may be something wrong with me but at the moment there is nothing I need and really nothing I want.

July 20, 2018, 09:58 PM	#33
DPI7800 Senior Member Join Date: July 15, 2014 Posts: 208	Number 1 on my list is an Accuracy International AX/MC set up in 338LM with the 2 additional bolts, the additional magazine insert and magazines and 2-3 additional barrels. Probably will order first of the year.

July 22, 2018, 06:34 AM	#35
Eazyeach Senior Member Join Date: January 14, 2014 Posts: 706	Well right now I have one more AR upper than I do lowers. So I’m thinking of making my spare upper into a complete rifle. So my answer is AR15 lower. I might consider getting a spare carry gun too. S&W M&P 2.0 compact. Not very exciting I know, but I’ve got a couple guns that I’ve had awhile and still haven’t shot. So I need to rectify that issue.

July 25, 2018, 09:56 AM	#36
WV_gunner Senior Member Join Date: December 14, 2011 Location: WV Posts: 938	Forgot about the 440 Corbon, so really I’d like my next cartridge gun to be a single shot 440 Corbon pistol but my next gun will hopefully be a CVA muzzle loader pistol.

July 25, 2018, 11:09 AM	#38
kmw1954 Senior Member Join Date: June 11, 2016 Location: SE Wisconsin Posts: 1,524	Nothing I Need or Have to Have though there are a few I would like to add and would shoot them if I had them. One would be to replace a S&W Model 19 I traded away years ago. Then there are a couple Tanfoglio Witness that would fit nicely in a couple different calibers. Lastly for some reason an M&P Shield 45. Far down the list a S&W Model 57 41mag 6".

August 8, 2018, 07:33 PM	#39
SmokeyLonesome Junior member Join Date: July 24, 2018 Location: Colorado Posts: 25	A Henry Big Boy or a Marlin 30-30.

August 11, 2018, 11:57 AM	#41
mulespurs Senior Member Join Date: February 26, 2012 Posts: 115	What I want is a smaller 1911 like the browning 380 size in a 9mm. I know that there are others like the sig 938 and more but the browning seems just right to me , just in the wrong chambering.

August 11, 2018, 12:14 PM	#42
Cirdan Senior Member Join Date: December 2, 2013 Location: Tahoe Posts: 363	Can't decide. Down to: Sig 238 Rock Island 1911 Government Marlin/Henry lever in 38/357

August 11, 2018, 07:43 PM	#43
mr bolo Senior Member Join Date: November 19, 2012 Posts: 432	probably a GLOCK 30 SF

August 12, 2018, 12:14 AM	#44
TXAZ Senior Member Join Date: September 5, 2010 Location: McMurdo Sound Texas Posts: 4,322	GAU-19B. Something impractical but a blast to shoot: http://www.imfdb.org/wiki/File:GAU-1...pod_stand.jpeg https://en.m.wikipedia.org/wiki/File...GECAL_50_2.jpg https://youtu.be/qtBhA8QPArE http://youtu.be/qtBhA8QPArE __________________ Cave illos in guns et backhoes Last edited by TXAZ; August 12, 2018 at 12:21 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search