|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
August 27, 2001, 02:13 PM | #1 |
Junior Member
Join Date: August 26, 2001
Location: fl
Posts: 7
|
Webley Mk 4 firing pin replacement
Is it possible to replace the firing pin a Mk 4 webley and how do you remove the broken one, or do you have to replace the complete hammer.
Does any one know were i can get a firing pin or would i need to get one made. Thanks in advance for any info. |
August 27, 2001, 07:01 PM | #2 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,841
|
The .38 cal. Mark IV had a rivet which held the firing pin in place. Pop out the rivet with a punch and the firing pin should come out of the hammer. The larger .455 Mark VI had the firing pin integral with the hammer and modernly I would build up the firing pin by welding to the existing one and then reshaping it.
Try Gun Parts Inc. for your part.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
|
|