|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 29, 2013, 11:11 AM | #1 |
Senior Member
Join Date: June 29, 2013
Posts: 189
|
Removing/reattaching suppressor
Does frequently removing a suppressor add any excess wear and tear than just an increased risk of cross-threading?
I have an AR-style .22 (HK416) and am in process of getting a suppressor. I'm debating on a carry bag, though. A 42" would hold the gun fine, but a 36" would be less cumbersome (as well as slightly cheaper). However, if I got the more convenient 36", I'd have to remove the suppressor for storage/carry. Thoughts? |
June 29, 2013, 06:00 PM | #2 |
Senior Member
Join Date: October 22, 2010
Posts: 221
|
I've taken mine off rifles and pistols hundreds of time without issue. As long as you don't cross-thread when putting it back on I can't imagine there would be a problem.
Personally, I'm more afraid of damaging something by transporting WITH the can attached. |
June 29, 2013, 06:18 PM | #3 |
Senior Member
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 3,006
|
I will second that. The only time I transport any of my guns with the suppressor mounted is when they are in a hard shell case. Even then I check to make sure they didn't loosen when in transit.
Also, it is a good idea to remove suppressors after shooting (once they are cool enough to handle) or the carbon fowling might "weld" them to the muzzle.
__________________
"9mm has a very long history of being a pointy little bullet moving quickly" --Sevens |
June 30, 2013, 08:04 AM | #4 |
Member
Join Date: July 11, 2012
Location: CinSity,NV
Posts: 86
|
I've never had a problem with cross threading. I guess i'm really careful when I start to thread it on.
|
June 30, 2013, 08:17 AM | #5 |
Senior Member
Join Date: June 29, 2013
Posts: 189
|
Thanks. Nice point about transport damage with it attached. I'd be removing it anyway to clean after each shooting session, especially since it's a .22.
And I'm really careful with my toys, so I'm not particularly concerned I'll cross-thread it. Thanks for the confirmation, guys. |
June 30, 2013, 09:47 AM | #6 |
Senior Member
Join Date: October 3, 2012
Posts: 1,229
|
I keep the threads wet with RemOil. It makes it much easier to thread on. I had a couple times when the threads were really dry, and I didnt like the way it felt when starting the thread. A light oil just makes it go much easier.
|
June 30, 2013, 02:39 PM | #7 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
No cross thread, no cry.
|
|
|