|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 21, 2018, 04:18 PM | #1 |
Senior Member
Join Date: September 12, 2015
Location: Issaquah WA. Its a dry rain.
Posts: 1,774
|
Should I trade out my 586 for an N frame?
I had to get a 357 in blue, because, you have to have one, Right? So I went with a 586, 4" with the full lug. Looks great. Shoots fine. Trigger is pretty good. But, I find the L frame to be a bit sparse for real estate. I have pretty big hands and I find that everything about my 629 N frame so much more comfortable. Ive been thinking of trading out the 586 for a blued N frame in 357. So give me your opinion, am I nuts? Go for it? Thoughts? Etc etc.
__________________
Just shoot the damn thing. |
June 21, 2018, 04:30 PM | #2 |
Senior Member
Join Date: May 6, 2005
Location: North Chesterfield, Virginia
Posts: 4,767
|
From a practical standpoint, I'd say just swap out the grips, but if you like the big N frame gun, I can understand that. Personally, I don't care for the full lug barrel found on the 5/6 series of L-frames.
Just to tease a bit. Model 27-2, 4" barrel. (No, the grips are not mismatched) I say if you want an "N" get one.
__________________
For God so loved the world, that He gave His only begotten Son, that whoever believes in Him should not perish, but have everlasting life. John 3:16 (NKJV) |
June 21, 2018, 04:35 PM | #3 |
Senior Member
Join Date: April 13, 2013
Location: N. Georgia
Posts: 1,150
|
Is it the stocks that are too small.
Look for more hand filling stocks; check Herrett and Altamont. The N-frame grip area is not all that much bigger but the trigger reach is a bit more. I think you've got to consider what stocks are on the 586 vs. the 29. Personally I find the N-frame just at the extreme for my hands but the L-frame or K-frame, of course depending stock circumference and size, much better. |
June 21, 2018, 07:35 PM | #4 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
I think that while the Model 27 is absolutely gorgeous, a Model 28 is a "must own" because they made truckloads and they almost always have great prices on them. I would NEVER rid myself of a 586 for the purpose of getting another S&W revolver, I think that is a terrible idea.
I have two 28-2's. I'm somewhat particular about looks and I'd honestly say that 28's are pretty darn homely, but the 6-inch looks better than the 4-inch. It's the fat, stubby cylinder that makes them goofy looking (IMO) but the very utilitarian matte finish doesn't help a lot. Yeah, I'm critical on the looks but at the same time, I just LOVE shooting my 28's. Keep the 586, add a 6-inch 28-2.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
June 21, 2018, 07:48 PM | #5 | |
Senior Member
Join Date: November 14, 2017
Location: Finger Lakes Region of NY
Posts: 1,442
|
Quote:
Don
__________________
NRA Life Member NRA Certified Metallic Cartridge Reloading Instructor |
|
June 21, 2018, 09:41 PM | #6 | |
Senior Member
Join Date: January 22, 2005
Location: Kentucky
Posts: 3,623
|
Quote:
__________________
Cherish our flag, honor it, defend it in word and deed, or get the hell out. Our Bill of Rights has been paid for by heros in uniform and shall not be diluted by misguided governmental social experiments. We owe this to our children, anything less is cowardice. USAF FAC, 5th Spl Forces, Vietnam Vet '69-'73. |
|
June 21, 2018, 11:51 PM | #7 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,832
|
If everything about your 629 suits you, and you want those same things in .357Mag, get one. Trade the gun that isn't "just right" for one that is.
I've never owned an L frame. Handled them a bit, and I don't like the balance. The books say they weigh exactly the same an the N-frame, but they balance differently for me, anyway. I happen to think the 6" model 28 looks great. I like the satin blue finish better than the high luster blue of the 29 or 27. Just personal taste. Don't care much for shiny pistols. I would trade an L frame for an N frame in a heartbeat. And I've had K frame guns, too. Very good for some things, but not as good as an N frame for others.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
June 22, 2018, 02:20 AM | #8 |
Senior Member
Join Date: June 30, 2017
Location: Columbia Basin Washington
Posts: 414
|
Get the N frame, trade the L or sell it outright.
It fits me better, I would much rather have a model 27, or 28. Get a 3 1/2 inch or 4. They are built strong, and to me feel a lot smoother in the action. Years ago I weighed my 4. Inch model 28, and a 586 on a postal scale. The 586 weighed the same as my 28. |
June 22, 2018, 05:23 AM | #9 |
Senior Member
Join Date: December 28, 2006
Posts: 4,342
|
I don't think I'd ever be without a L-Frame(have 4), even tho I have a coupla N-Frames and an X-Frame. I'd suggest trying some different grips. The big cushioned X-Frame grips from S&W also fit the L-Frames, and are only about $40.
|
June 22, 2018, 06:36 AM | #10 |
Senior Member
Join Date: June 18, 2017
Posts: 178
|
Yeh, love the 28 also but have been using an M&P R8 for several years. N frame with 8 rounds of 357 and 5” barrel. I prefer 5” barrels on my Ns. Balance better.
|
June 22, 2018, 07:27 AM | #11 | |
Senior Member
Join Date: January 22, 2005
Location: Kentucky
Posts: 3,623
|
Quote:
__________________
Cherish our flag, honor it, defend it in word and deed, or get the hell out. Our Bill of Rights has been paid for by heros in uniform and shall not be diluted by misguided governmental social experiments. We owe this to our children, anything less is cowardice. USAF FAC, 5th Spl Forces, Vietnam Vet '69-'73. |
|
June 22, 2018, 09:32 AM | #12 |
Senior Member
Join Date: May 15, 2012
Location: Texas
Posts: 2,566
|
Keep the L and buy an N. You need both. I bought a 625 JM some years ago, love the JM grips. I bought a set of JM grips for my 586, they are smaller than the N frame grips, will go back to Hogues for now.
|
June 22, 2018, 11:20 AM | #13 |
Senior Member
Join Date: July 10, 2012
Location: Memphis, Tennessee
Posts: 2,989
|
I believe once you shoot the two, L-Frame and N-Frame, you'll find the L-Frame to be the winner. It's cylinder is a trifle bit longer so you can use the heaviest of bullets without their protruding from the cylinder face. And I believe you'll find the L-Frame the perfect size for the .357 Magnum cartridge.
I've gone through K- and N- framed Smiths, Colts, including the vaunted Python, and, to me, the Model 586 is the very best .357 Magnum double action to come out yet. Though I must say I've no experience with the Ruger DA revolvers. Bob Wright
__________________
Time spent at the reloading bench is an investment in contentment. |
June 22, 2018, 11:40 AM | #14 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
Six of this half, dozen of the other. Depends on your budget. You can get bigger grips for the 'L' frame for a lot less than a whole 'N' frame. However, there is the "I want one." factor too.
Factory triggers are irrelevant. They all need work. Unless it's a Python.
__________________
Spelling and grammar count! |
June 22, 2018, 12:01 PM | #15 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,308
|
grips
I'll mention this as nobody has yet........the L-frame takes any K-frame grip. If your objection to the L-frame is the grip....I'd work on that, as there are a wide variety of Kgrips made.
'Course if a fella just really wants an N-frame....... |
June 23, 2018, 09:43 PM | #16 |
Senior Member
Join Date: September 12, 2015
Location: Issaquah WA. Its a dry rain.
Posts: 1,774
|
Hi again Gents, back from camping so let me respond to all of your input. First off, Thanks! I didn't even think that different grips would buy me real estate on an L frame, for as lottle as that will cost I'll give it a try for sure. And as some one said, yes I think the L frame is kinds of the right size for 357, would seem a lottle under bored on an N frame. BUT, I literally own no other oistol that fits me so well as my N frame. And on the thought of keeping the L frame and getting another N frame....well, you're honing in on how I work.
I've got alot of reading/learning to do.
__________________
Just shoot the damn thing. |
June 24, 2018, 07:25 AM | #17 | |
Senior Member
Join Date: March 18, 2013
Location: Northeastern US
Posts: 1,869
|
Quote:
|
|
July 14, 2018, 05:03 PM | #18 |
Member
Join Date: July 9, 2017
Posts: 23
|
I'd say keep the 586, and add a 6" 27 N frame, and a 21/2" 19 K frame. Then you have all three frames in the most common barrels.
|
July 16, 2018, 10:18 PM | #19 |
Senior Member
Join Date: November 10, 2014
Posts: 1,380
|
The older P&R N frames are smooth running and dependable revolvers. I don't
keep 4" or shorter guns in K or N frames. I'm not looking for 3lb gun to carry for CCW. Python is a nice gun but not a better gun than a 27. The 27 will take more use with full power loads than a Python. The lock work in S&Ws is more durable than Colt. The L is not the gun Python is for fit and finish but it still is a more durable gun. The 6 or 83/8" 27 is hard to beat for field & target. There is nothing wrong with a 28 either and 6" guns are out there, most 4". I got a 6" 28 with Target Grips in presentation case / docs and tools in 90%+ for $650 recently. It's first cased one I ever saw. I have seen 28 prices starting to edge up. I'm dabbling in S&W P&Rs daily and deals are getting harder to find. |
July 17, 2018, 12:28 PM | #20 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,808
|
I sold my L frame guns after buying a Smith 28. It just isn't that much bigger and in fact is lighter without the full length recoil lug.
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong" Winston Churchill |
July 17, 2018, 05:38 PM | #21 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,832
|
Model 28s didn't come from the factory with wood presentation boxes or target grips. 27s did, and since the 28 is the same size, will take the grips and fit in the same box.
A presentation wood case adds no value to me for a model 28. Looks pretty, but isn't something I would pay extra for. Unless you get a factory letter (Roy Jinks used to be the guy, but I don't know if he still is) stating your 28 left the factory with target stocks and a wood presentation case, they don't add any collector value. Actually the opposite. I've got a 28-2 with the target hammer and trigger. Its my favorite DA centerfire revolver. I also have the factory (blue) box. (with the gun's serial # on it). My gun didn't leave the factory with that hammer & trigger, but it did get them put in before it was sold the first time. S&W used to sell "bubble packs" (blister packs?) with the target hammer & trigger, and any gunsmith could put them in any model correct revolver. They haven't done that for quite a few years now...
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
July 17, 2018, 07:12 PM | #22 |
Senior Member
Join Date: January 24, 2014
Posts: 577
|
Get um and keep both
I got both. The 586 is a great revolver. It handles well and is accurate. No problems with mine. I have a Model 28 and 27. These guns are sufficiently different size to make a comparison hard. Handle both the guns at the same time. This difference will jump out at you. I recall that K and L frames use the same grips. It looks like the day of getting cheap Model 28's is in the past. I go for keeping the 586 and shopping around for a 27 or 28. The 586 was sold as being more handy than an N frame and stronger than a K frame 357.
__________________
Intentionally Antagonizing Another MemberInsults and Ad Hominems |
July 17, 2018, 10:26 PM | #23 |
Senior Member
Join Date: February 24, 2001
Location: San Joaquin Valley, CA
Posts: 1,281
|
Didn't I hear that the N-Frame may, just may, go out of timing a hint faster, as there is more rotational weight in the cylinder [both being same caliber], as the cylinder is wider? IF I recall correctly, this would only happen under rapid DA trigger usage.
The L frame fits me, so it isn't an issue. If the reach to the trigger is fine, but the grips feel 'off', swap grips. If the reach to the trigger feels too compact, and the grips feel dinky- then either get really filling grips or get an N frame. I don't have any N frames. The largest I have are .44mag by Ruger: SRH. Those are also hefty. Yet, I don't like the feel of my 586 as much as my GP100, or Colt 3 5 7 [yes, that IS a model: came out 2 years before colt added that vented barrel and called it a Python]. |
July 18, 2018, 01:00 AM | #24 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,832
|
Quote:
Most owners will never come even remotely close to shooting enough DA at speed for this to matter. When the police carried N frames, it was never an issue of concern for them. Basically, like any other quality gun, if you shoot it hard and fast enough to need a tune up, you've "bought" the gun a few times over in the cost of the ammo fired.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
|
|