|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 5, 2012, 03:40 AM | #1 |
Senior Member
Join Date: October 4, 2008
Location: WI
Posts: 3,656
|
SliP2000 vs Breakfree CLP or other Cleaners
Which do you prefer and why? I have a friend who swears by SLiP. (he owns a glock and AR) I'm not to picky I use CLP Hoppe's No. 9 Oil and Outers Nitro when necessary and a Hoppe's Silicon Cloth to wipe them down. I own a wider variety of firearms that are blued, stainless, or ceramic etc.
What do you guys use and why?
__________________
E-Shock rounds are engineered to expend maximum energy into soft targets, turning the density mass into an expanding rotational cone of NyTrilium matrix particles, causing neurological collapse to the central nervous system.- Yeah I can do that. I guarantee you will know it if a bicyclist hits your house going 1000 mph. -Smaug |
March 5, 2012, 09:24 AM | #2 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
Slip 2000 is what I use, both because it works really well and because being non-petroleum based, I can throw out the waste products (patches, etc.) in the trash without running afoul of the ever more complex municipal waste disposal codes.
|
March 5, 2012, 10:16 AM | #3 |
Senior Member
Join Date: October 30, 2011
Posts: 147
|
Ballistol. I'm all about non-toxic. And the stuff just works.
Best of all, I can put it on the wood, leather, etc., and it does good for all. Many other products can damage different areas on the gun. But don't listen to me... Hickok45 from Youtube loves the stuff. http://www.ballistol.com/videos.htm |
March 5, 2012, 10:54 AM | #4 |
Junior member
Join Date: April 21, 2011
Location: Illinois
Posts: 4,555
|
I prefer mixing my own stuff up because I can pretend I'm a mad scientist working in a laboratory.
I take some Castrol ATF fluid and pour it into my container, then I mix in some mineral oil... Bwaa ha ha ha ha ha... Sometimes I mix in some Kerosene, Stoddard Solvent, mineral spirits and acetone.. Bwaa ha ha ha ha ha... |
March 5, 2012, 10:57 AM | #5 |
Senior Member
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,159
|
Another vote for Ballistol... and Kroil.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two. |
March 6, 2012, 01:24 PM | #6 |
Senior Member
Join Date: January 26, 2011
Location: USA
Posts: 714
|
Breakfree CLP works just fine for me.
|
March 8, 2012, 04:11 PM | #7 |
Senior Member
Join Date: February 8, 2008
Location: Denver, CO
Posts: 1,925
|
I use Breakfree, but a sample of Slip2000 came with my GSG-1911. Gotta say, it was some very nice stuff. Wish I could find a place locally that stocks it.
|
Thread Tools | Search this Thread |
|
|