|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 24, 2019, 04:07 AM | #26 |
Senior Member
Join Date: November 6, 2011
Location: Burien,WA
Posts: 897
|
Well Op your best bet would be a WASR 10/63 or one of VEPRs and/or Saigas if you can find one sub $1k.
__________________
Rugers:SR1911 CMD,MK 3 .22lr 6",Sec. Six '76 liberty .357 4",SRH .480 Ruger 7.5",Mini-14 188 5.56/.233 18.5", Marlins: 795 .22lr 16.5",30aw 30-30 20",Mossberg:Mav. 88 Tact. 12 ga, 18.5",ATR 100 .270 Win. 22",S&W:SW9VE 9mm 4",Springfield:XD .357sig 4", AKs:CAI PSL-54C, WASR 10/63, WW74,SLR-106c |
March 24, 2019, 11:54 PM | #27 |
Senior Member
Join Date: February 18, 2008
Location: About 20 nm from the Big Muddy
Posts: 2,887
|
M88: Also be aware, if not already:
If the AK you buy has a tiny spring angling downwards from the left side of the safety lever, don't remove the safety lever until you are very familiar with this. *Shepherd's Hooks* can be challenging to reinstall correctly due to the tiny spaces. Check the diagrams which depict four different shapes of hooks in a single grouping, with labels such as Chinese...Bulgarian etc. Two of my imported AKs: the SAR-1 and AMD-65 (Hungarian matching barrel etc, by TGI) have the 'hooks' installed backwards, but these have done their job quite well. They are Not connected to the safety levers, because these "Bulgarian-style hooks" are far too short--were Not designed to connect. If you ever decide to replace a trigger group due to unpleasant "trigger slap", you can easily install an $8.00 Retainer Plate into the grooves on both pins, instead of bothering with the shepherd's hook for reassembly. The Retainers have a third hole in the rear for the safety lever. You can immed. Google the diagrams which depict the shapes and configurations of various AK hooks. Last edited by Ignition Override; March 25, 2019 at 12:02 AM. |
March 27, 2019, 10:00 AM | #28 |
Senior Member
Join Date: November 20, 2008
Posts: 11,132
|
I personally like the Arsenal Milled SAM7 underfolder (about $1,500). I also like the milled Arsenal Bulgarian (about $1,200). I would be looking at these if you want something that might appreciate or at least hold their value.
|
|
|