|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
November 6, 2009, 07:19 PM | #2076 |
Member
Join Date: September 14, 2008
Posts: 18
|
Have now narrowed down the guns.
The nickel one is 1953 double action wide rib std trigger and hammer.. grips same serial number as the gun...sounds 99 1/2% The Blued on is 1948...single action, target trigger and hammer...non original grips...has ring mark on wheel..owned and maintained by the smith at our shooting club....but still accurate. They are both the same price as the nickel one would be better in a show case.........I think these were made to be used but cared for and I will be using lighter loads as it is for bullseye. Some people have said that I would do better to get a newer 686 as they are better made than these would have been. All my current guns are older and my Clarke colt 1911 is 1976 and that seems to shoot just fine....better than i can. But I have never seen recent 50 yard target shot with a pre 14 k38. |
November 6, 2009, 09:11 PM | #2077 |
Junior Member
Join Date: November 6, 2009
Location: Texas
Posts: 1
|
Question about an antique .38
I have an old pistol that belonged to an uncle who passed away in 1971, I believe he had the gun for many years but I know nothing about it other than it's a Smith and Wesson .38, I can barely see 6 digits on the butt of the gun, can anyone help me identify?
Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM. |
November 6, 2009, 11:23 PM | #2078 | |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
Quote:
Jim |
|
November 6, 2009, 11:26 PM | #2079 | |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
Quote:
1-800-331-0852 (USA) Mon-Fri 8:00AM-8:00PM Eastern Time Jim |
|
November 8, 2009, 11:38 AM | #2080 |
Junior Member
Join Date: November 8, 2009
Posts: 2
|
Hi Guys, was wondering if someone could tell me the manu. date of my S&W Model 36 Chief's Special, J-frame Snub .38 SPL, Serial ACJ655X.
See attached pic. Appreciate the help. Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM. |
November 8, 2009, 02:59 PM | #2081 |
Member
Join Date: November 3, 2009
Location: Fruitland Park, FL
Posts: 36
|
Burra,
Jan 1983 starts with ABL4000 and Oct 1983 starts with ADE6700. So ACJ would be in that range. |
November 8, 2009, 11:04 PM | #2082 |
Junior Member
Join Date: November 8, 2009
Posts: 2
|
year of manufacture S&W K22
I own a Smith & Wesson K22 revolver.
The serial number is: K 32691 Can anyone tell me the year of manufacture? [email protected] |
November 8, 2009, 11:38 PM | #2083 | |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
Quote:
Jim |
|
November 9, 2009, 03:59 AM | #2084 |
Junior Member
Join Date: November 8, 2009
Posts: 2
|
Date of manufacture
Thanks for the info.
CG |
November 10, 2009, 01:51 PM | #2085 |
Junior Member
Join Date: November 10, 2009
Posts: 4
|
Smith model 37
Hello - Would someone mind telling me about this one? serial - J970XXX
Year of mfg and can it shoot +p? Thanks much! -RY |
November 10, 2009, 02:07 PM | #2086 | |
Senior Member
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,731
|
Quote:
|
|
November 10, 2009, 02:22 PM | #2087 |
Junior Member
Join Date: November 10, 2009
Posts: 4
|
Smith model 37
Great... Thanks FlyFish for the speedy reply!
|
November 10, 2009, 03:42 PM | #2088 | |
Junior Member
Join Date: November 8, 2009
Posts: 2
|
Quote:
|
|
November 11, 2009, 03:33 PM | #2089 |
Junior Member
Join Date: November 11, 2009
Posts: 2
|
Hey guys, I found an old break-open revolver in my grandfather's desk after he passed away.
Serial umber on butt is unreadable, but I believe the number on the cylinder reads 405xxx, possibly 406xxx. It is DA and if I had to guess I would say it's a .38 (I had some 9mm laying around and it loaded into the cylinder). Looks like a 6 1/2 inch barrel. What is this thing and how old is it? Thanks, george |
November 11, 2009, 04:45 PM | #2090 |
Member
Join Date: June 24, 2005
Posts: 45
|
True Grit, it looks like a .38 double action 4th model.
The Serial number range is 322701-539000. They were made from 1895-1909. Since yours in in the middle of the serial number range, it was probably made around 1900-1905. Price is probably around 100-150. There were quite a few made, and yours isn't in the best of condition. Last edited by tel0004; November 11, 2009 at 05:13 PM. |
November 11, 2009, 07:06 PM | #2091 |
Junior Member
Join Date: November 11, 2009
Posts: 2
|
Thanks man, it will look cool sitting on my desk.
|
November 11, 2009, 08:34 PM | #2092 |
Junior Member
Join Date: November 11, 2009
Posts: 1
|
S&W 357 Revolver
Friend is selling a S&W revolver. Not sure of the model but I am curious about the age of the gun. Serial is 9D326XX. Has a beautiful set of rosewood grips and is in almost perfect condition. Anyone willing to give me the age of this gun and what it sold for new?
Michael |
November 11, 2009, 09:16 PM | #2093 |
Member
Join Date: November 3, 2009
Location: Fruitland Park, FL
Posts: 36
|
9D326xx puts it in 1981. There are 7 different models made with the 9d #'s. With a model number, someone may be able to help you.
|
November 12, 2009, 12:29 AM | #2094 |
Senior Member
Join Date: February 9, 2002
Location: Nunya
Posts: 113
|
Jim L. just cleared up the date (1955) for my K-38 Combat Masterpiece, in another thread. This is one of only two revolvers I own. The other one is also a used S&W model - an M 60-7 (nickelplated) with a BSC 61** serial number. Since I want to determine if I can safely shoot +P's out of it, can anyone here find what the date is?
__________________
I know who I am. I'm the dude playing the dude disguised as another dude. |
November 12, 2009, 01:19 AM | #2095 | |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
Quote:
S&W began a heat treating package on model 60's starting in 1990 with the 60-7 which made them +P rated. Your K-38 is nickel but your 60-7 is stainless steel. Jim Last edited by laytonj1; November 12, 2009 at 01:26 AM. Reason: add info on finish |
|
November 12, 2009, 08:20 PM | #2096 |
Senior Member
Join Date: February 9, 2002
Location: Nunya
Posts: 113
|
Thanks - again - Jim. U de man!
__________________
I know who I am. I'm the dude playing the dude disguised as another dude. |
November 13, 2009, 07:40 AM | #2097 |
Junior Member
Join Date: November 13, 2009
Posts: 1
|
Model 66 info
I purchased a used S&W Model 66 in 2001, serial # 9K22565. Just had it overhauled by Sandy Garrett of Northern VA Gun Works (his work is superb!) and boy does it work smoothly now. He said the gun had been fired a lot over the years!
Can anyone give me a year of birth or any other info based on the serial # - it does have a "pinned" barrel. Thanks - J.P. |
November 13, 2009, 08:39 AM | #2098 |
Senior Member
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,731
|
crasht51 - That SN would date your Model 66 to 1976, and it should be a "no dash." The pinned barrel and cylinder counterbore (which yours should also have) were dropped with the -2 in 1982. They were last manufactured in 2004.
|
November 13, 2009, 01:55 PM | #2099 |
Senior Member
Join Date: July 31, 2008
Posts: 295
|
My "new" model 29-2
Serial number N703xxx. Thanks for the help, I've learned a lot just reading this thread.
|
November 13, 2009, 02:41 PM | #2100 |
Junior Member
Join Date: November 10, 2009
Posts: 1
|
old smith and wesson pistol or handgun
need to sell old smith and wesson money to go towards large medical bills. it belonged to my husband. don't know .455 serial#720xx patent dates are 10-8-1901 and 2-17-1901 and 2-8-1906 or 2-8-1908 not sure then there is a #30 on the bottom of handle with 3 oblong type circles or somthing on top of the 30. also 2 sets of numbers both the same. the numbers are 4875 in 2 places. also there is a letter B in front of serial #720XX. that is everything thats on the gun. what year was the gun made what kind of gun is it. and how much is it worth. sorry to bother you, but if anybody out there knows anything if you could please let me know. thank you very much.
|
Tags |
s&w 686 |
Thread Tools | Search this Thread |
|
|