April 7, 2013, 04:47 PM | #1 |
Senior Member
Join Date: April 4, 2012
Location: South Jersey
Posts: 2,217
|
1911 Bushing
Where can I get a barrel bushing for a 1911 that is not bored? I have been creeping around the intraweb. But havent found any yet.
This is for the Llama 9mm Largo that I mentioned in other posts.
__________________
Concentrated power is not rendered harmless by the good intentions of those who create it. Milton Freidman "If you find yourself in a fair fight,,, Your tactics suck"- Unknown |
April 7, 2013, 07:28 PM | #2 |
Senior Member
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
|
__________________
Shoulder Drive Nicholson Club |
April 9, 2013, 11:18 AM | #3 |
Senior Member
Join Date: March 1, 2000
Location: Boise, ID
Posts: 8,518
|
Is it a true 1911? Lots of Llama and Star pistols have the 1911 look, but few parts are interchangeable.
If you want a bushing that is oversized on the outside and undersized on the inside, look for a G.I. match bushing. They can generally be found pretty cheap. EGW does make excellent stuff, and if you provide the desired ID and OD, to the thousandth of an inch, they will make a custom bushing for you. EDIT: Your Llama has a barrel that's smaller in OD than a standard 1911 barrel (~.578"-.580")? What size is it? I have the small-diameter bushing that came on my Colt .38 Super, and will send it to you if it's small enough that you could enlarge it to fit your barrel. Last edited by RickB; April 9, 2013 at 11:23 AM. |
April 11, 2013, 07:26 AM | #4 |
Senior Member
Join Date: February 5, 2008
Location: DeLand, FL
Posts: 110
|
+1 on EGW. If they don't have it in stock they can make one for your with your own specs, call them up. Best is to get it oversized and hand-fit it, your grouping will thank you later!
__________________
http://nitrorigging.com |
|
|