March 10, 2001, 06:53 PM | #1 |
Senior Member
Join Date: January 9, 2000
Location: Red River Valley
Posts: 127
|
I recently purchased a 10" Contender barrel in .32 H&R Mag. This barrel came with a front sight but no rear sight. I would like to bring this barrel back to original condition with the proper sights. My question is which variation of the Contender sight fits this barrel? This barrel has the removable type front sight with a low front blade. The information I have says these barrels were produced between 1985 and 1990. Thanks in advance for all information.
|
March 11, 2001, 09:22 AM | #2 |
Member
Join Date: November 23, 2000
Posts: 26
|
Contender sights
Cris I have been shooting contenders for about 2 years now but all my barrels have scopes on them,I don't know what rear sight you would need but try E-mailing the tech's at T/C they should be able to help.
http://www.tcarms.com you could also try posting here http://www.singleshooters.com http://www.graybeardoutdoors.com/forums/ Good luck John |
March 12, 2001, 01:12 AM | #3 |
Senior Member
Join Date: November 21, 1999
Location: Madison, WI.... "78 Square Miles Surrounded by Reality"
Posts: 923
|
Cris,
You've got a fairly recent barrel since the 32 H&R has only been around since 1985 or so. There shouldn't be any problem finding the correct rear sight for it. I've got a number of Contender barrels, the oldest from the early 70's, and they all take the same rear sight. Small details may be different, I've got at least 3 distinct styles, but they're all basically the same. It's the front sight height that varies from barrel to barrel and caliber to caliber. First try contacting T/C's service dept, chances are they'll send you one for free, if not I doubt it'd be much over $20. If that don't work try some of the vendors from Graybeard's Links. -- Kernel |
|
|