August 18, 2010, 10:11 AM | #1 |
Member
Join Date: August 3, 2009
Posts: 78
|
bullet mold question
i shoot 38 special. on midway they have a lee bullet sizeing die that is for .357, can i use it to size bullets for my 38? the lee mold i have is set for .358. or will this cause trouble? thanks
dale PS. the .357 die is on sell! lol |
August 18, 2010, 10:27 AM | #2 |
Senior Member
Join Date: March 1, 2010
Location: Hopewell Junction, NY
Posts: 454
|
.358 is where you should be on lead 38 special bullets. No need to resize them. .358 bullets when fired, will swage into the rifling, creating a good contact betwen the bullet and the rifiling. If you are already sized at .358, leave it alone, thats where you want to be!!!
-George |
August 18, 2010, 10:31 AM | #3 |
Member
Join Date: August 3, 2009
Posts: 78
|
ok thanks! you just saved me $30! lol
dale |
August 18, 2010, 11:55 AM | #4 |
Senior Member
Join Date: May 22, 2007
Location: Arizona
Posts: 5,299
|
Yep, same same. I use two Lee moulds for 38, and one of them was meant for 9mm.
|
|
|