Winchester 244 Thoughts

k4swb · October 9, 2018, 03:17 PM

I would have sworn I posted this already but maybe not. Maybe got deleted. So here I go again, or not.

Anyone using Winchester 244 for multiple handgun loads?

I am only interested in users of WinClean 244 and their comments about the same.
I know there are other powders out there and at this time am not interested in them.
Normally I use WST for most loads and make up what’s left with W231.

Running low on both and want to try the WinClean 244 to see how it works for .44mag/spl, .45ACP and 9mm.

All will be used for target plinking and midrange loads. Paper punching and gong ringing.
On paper this powder looks good for all.
Don’t really need load details, just basic thoughts on the performance of 244 powder

October 9, 2018, 03:17 PM	#1
k4swb Senior Member Join Date: July 11, 2009 Posts: 389	Winchester 244 Thoughts I would have sworn I posted this already but maybe not. Maybe got deleted. So here I go again, or not. Anyone using Winchester 244 for multiple handgun loads? I am only interested in users of WinClean 244 and their comments about the same. I know there are other powders out there and at this time am not interested in them. Normally I use WST for most loads and make up what’s left with W231. Running low on both and want to try the WinClean 244 to see how it works for .44mag/spl, .45ACP and 9mm. All will be used for target plinking and midrange loads. Paper punching and gong ringing. On paper this powder looks good for all. Don’t really need load details, just basic thoughts on the performance of 244 powder __________________ My posts are things I have tried or experienced. You may or may not wish to emulate them so read them with this in mind. Compromise means that both sides give something, but they never give, they just take. I'm The NRA!