|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 24, 2011, 12:41 PM | #1 |
Member
Join Date: June 15, 2011
Posts: 95
|
Beretta 390 replacement stock
I have looked at a few Beretta 390s, but all I have seen are ones with synthetic stock. Are walnut stocks available as an aftermarket addition/what are the costs?
It would seem that having both options might be nice - walnut for skeet/trap range, but synthetic for actual hunting. Do many folks do this (when you only have one shotgun)? |
June 24, 2011, 12:51 PM | #2 | |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Quote:
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
|
June 24, 2011, 01:19 PM | #3 |
Member
Join Date: June 15, 2011
Posts: 95
|
I know, but my primary hobby is woodworking and it would kill me to use a shotgun with synthetic stock.
|
June 24, 2011, 01:28 PM | #4 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
Cole's in Maine - Rich is THE Beretta go-to guy for a lot of parts, repairs, and customizations - be warned, nice stocks aren't cheap
https://colegun.com/wood-sets-berett...fa5543ce02ebcb |
June 24, 2011, 01:28 PM | #5 |
Member
Join Date: June 15, 2011
Posts: 95
|
So how much are we talking - enough to push me to a 3901 with a wood stock?
|
June 24, 2011, 01:30 PM | #6 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
See the link I added - some can go over $1200
|
June 24, 2011, 01:33 PM | #7 |
Senior Member
Join Date: September 6, 2008
Posts: 1,777
|
|
June 24, 2011, 01:53 PM | #8 |
Member
Join Date: June 15, 2011
Posts: 95
|
Thanks guys. I'll have to wait until I get home - those links are blocked from my current computer
|
June 24, 2011, 02:22 PM | #9 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
No, nobody I know does that on a shotgun ...but then I don't know anyone that only has one shotgun either ..
Its going to cost you between $ 400 and $ 500 for a wood stock ...( even for one that it was made from the finest " shipping grade pallets " they could find .../ or you can go up to about $ 2,000 ...or more, depends on what you want. You can sway out a stock and forend - in about 30 minutes ...but its a lot of trouble ...when you can just buy 2 guns. Buy a couple of used guns ...you'll be way better off .... |
June 24, 2011, 02:25 PM | #10 |
Senior Member
Join Date: February 11, 2007
Location: S. Florida
Posts: 280
|
Even if you did get some decent new stocks, the matte finish on the 390 will temper the beauty of the wood. You have a great excuse to purchase another shotgun.
|
June 26, 2011, 09:08 AM | #11 |
Senior Member
Join Date: January 5, 2010
Posts: 514
|
Beretta USA and Gunbroker.com. 390 sets come up all the time. They run $2-300. Satin finished stocks will look fine on a matte gun and if you need to shorten the LOP they're much easier to work with. As for trouble, it takes a phillips head screwdriver for the pad or buttplate and a 13mm socket for the stock and about 5 minutes. Its your gun, do what you want and dont worry what others think.
FWIW I switched stocks on my AL390. I dont like plastic, so I watched Gunbroker till I found what I was looking for and payed a fraction of what they cost new. I switch back to plastic when duck season rolls around. Saltwater is hell on wood stocks. After turkey season the wood goes back on. |
|
|