December 7, 2012, 03:07 PM | #1 |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
primers ?
I have always used CCI #400 small rifle primers in my AR. If you could not get any CCI primers, what primer would you go with ?
|
December 7, 2012, 03:09 PM | #2 |
Junior member
Join Date: July 13, 2012
Posts: 179
|
Wolf.. Wideners has them for $14/1000
DASHZNT |
December 7, 2012, 03:32 PM | #3 |
Senior Member
Join Date: February 9, 2011
Location: Just outside Cleveland, Ohio
Posts: 722
|
1st CCI , Started using them for handgun loads 30 some years ago and it’s hard to teach an old dog new tricks
2nd Winchester , Favorite for some rifle loads 3rd Remington , Always worked well but cost more than others 4th Federal , Work well when I have used them but I hate that stupid oversize box 5th Wolf , I have not tried them yet
__________________
The private ownership of firearms is an American Heritage. Anyone who disputes that is Anti-American and unpatriotic. NRA Life Member |
December 7, 2012, 04:37 PM | #4 |
Senior Member
Join Date: August 27, 2012
Posts: 321
|
Are Tula and Wolf the same primers?
I shoot 22lr a bunch and Wolf rimfire ammo is very well respected in 22lr circles. The Wolf and Tula primers are inexpensive. |
December 7, 2012, 04:41 PM | #5 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
I wouldn't use Wolf ...if they were free...
My choices....CCI, Win or Remington...I wouldn't use Federal either... |
December 7, 2012, 05:10 PM | #6 |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
If I have to use other than CCI primers will I have to wqork up my loads again ?
The reason I ask is because I have my 45 acp loads worked up with CCI and once the lgs was out of them and I tried Federal and wow I was shocked to see my groups open up. My groups went right back to normal when I got CCI primers again. |
December 7, 2012, 05:14 PM | #7 |
Senior Member
Join Date: March 4, 2012
Location: Iowa
Posts: 149
|
I've always used Remington or CCI. I have never had a primer fail in any firearm AR or otherwise.
__________________
Guns don't kill people, fathers with pretty daughters do. Two wrongs don't make a right, but three comes pretty close. Proud NRA member |
December 7, 2012, 07:51 PM | #8 |
Senior Member
Join Date: March 23, 2012
Location: Conway, Arkansas
Posts: 1,398
|
I love CCI primers. If I had to use anything else....well I'd wait and find some CCI primers somewhere.
If you change any component of your load, you should do another workup. Whether its bullet, brass, primer, or powder. Anyone of those change from a workup you did, you should do another workup. |
December 7, 2012, 09:23 PM | #9 |
Senior Member
Join Date: May 25, 1999
Location: Too close to Houston
Posts: 4,196
|
I'd go with whatever I could find and work a load up that works with them.
My AR's have seen a lot of Winchester SR primers and currently are fed a steady diet of Wolf SRM primers. That was the Wolf primer recommended for AR's before they started marketing their 223 and 556 versions...
__________________
Proud member of the NRA and Texas State Rifle Association. Registered and active voter. |
December 8, 2012, 01:39 AM | #10 |
Senior Member
Join Date: December 26, 2004
Location: Louisville KY
Posts: 13,806
|
Had lots of FTF with Wolf SPP, but I imagine the rifle primers would ignite better.
|
December 8, 2012, 09:50 AM | #11 |
Senior Member
Join Date: June 25, 2009
Location: Stuttgart, AR
Posts: 1,569
|
If you change a component you work up a load. If you change lot numbers then you should retest.
Wolf and Tula are made in same Russian plant. I've had zero SPP failures of either of these two brands to date. I'll will mention they are tight in pockets and must be seated properly.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part. |
December 8, 2012, 10:59 AM | #12 |
Senior Member
Join Date: May 26, 2008
Posts: 472
|
If you have trouble with Tula/Wolf primers, (spp) it's your gun, not the primers. I have run over 20,000 Tula primers in compettion in my pistols in the last three years, nary a prob.
Smokeyloads |
December 8, 2012, 11:54 AM | #13 |
Senior Member
Join Date: April 23, 2006
Location: South Texas
Posts: 2,010
|
200 more Tula SR primers this morning without an issue. So far I've shot 2000 Wolf and another 1000 Tula's. Not a single failure. I'll buy more.
|
December 8, 2012, 12:21 PM | #14 |
Senior Member
Join Date: November 21, 2011
Location: Southern Louisiana
Posts: 1,399
|
I've used over 20,000 Wolf large pistol, small pistol, and small rifle primers since I started using them 2 years ago. No problems, not a single mis-fire with them.
They do seem a little harder than the Winchesters that I used to use, so if you're into reduced-power hammer springs it could possibly be interesting. But I use small rifle primers on most of my small primer pistol loads and have never had any problems. |
December 10, 2012, 02:52 PM | #15 |
Senior Member
Join Date: November 14, 2011
Posts: 524
|
The Russian primers are good. Not a single issue with them in my AR yet. Suppose to be very good primers for rifles. I believe, not 100%, the Wolf and Tul Ammo are same primers? I got the KVB556M primers and like them. Dirt cheap so I can shoot more. Wideners has the Wolf for $14 a case right now and have them in stock
|
December 10, 2012, 03:29 PM | #16 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,389
|
My order of preference is:
1. Winchester 2. Remington 3. Federal 277. CCI
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
December 10, 2012, 03:38 PM | #17 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,063
|
Per your other post indirectly on this topic via report, because of your powder choice I would use the CCI #41 or 450 and not the 400. Yes you want to work the load up again, but because you would be sticking to H335, you could save time if you have a chronograph. Matching velocity in your own gun with only the primer changed, you really only need to back the load off 5% to work back up. The chronograph will quickly tell you if you are exceeding the velocity of the original loads as you step up. 2% steps are OK for pressure checking, so this is just 6 rounds you need to shoot and check for pressure signs. TulAmmo's NATO spec KVB556M primer should also be good and is military sensitivity spec like the #41 for AR actions.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle Last edited by Unclenick; December 10, 2012 at 03:48 PM. |
December 10, 2012, 03:45 PM | #18 |
Senior Member
Join Date: January 8, 2008
Posts: 803
|
Wolf makes solid primers, and the deal at Widener's right now is smoking. Wish I'd have seen it before I placed my order a week ago at Brownell's.
I have now learned to double check my sources. |
December 10, 2012, 06:52 PM | #19 |
Senior Member
Join Date: December 28, 2009
Location: North Central Illinois
Posts: 2,710
|
For the past 15 years I have used Winchester primers. No particular reason, just used them. I can not recall one failure to fire in my reloads. Not one. Recently I tried Remington Bench Rest primers in my .223 reloads. Very noticeable improvement in accuracy. I may switch to Remington.
|
December 10, 2012, 08:46 PM | #20 |
Junior Member
Join Date: June 16, 2012
Posts: 7
|
Wolf had a bad run of SPP with failure rates as high as 10% a few years back. I thought they quit selling SPP because of it and Tula took over. The primers went from brass color to silver and QC went off a cliff.
I still use Wolf LPP for practice ammo, but they are the brass color. I was getting them for $15.50 per K from Powder Valley and never had a LPP failure. |
December 10, 2012, 09:29 PM | #21 |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
are CCI # 41 primers a magnum primer as well as having a harder cup ?
|
December 10, 2012, 09:50 PM | #22 |
Senior Member
Join Date: April 23, 2006
Location: South Texas
Posts: 2,010
|
Yes, more or less.
|
December 10, 2012, 10:00 PM | #23 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,063
|
Yes, the CCI #41 is the exact same primer as a CCI 450, except the anvil feet are slightly shortened to meet the military sensitivity spec. The TulAmmo KVB556M is also a magnum primer, though I don't know how it achieves the NATO sensitivity spec so as to distinguish it from the KVB223M which is their standard sensitivity small rifle magnum primer.
CCI reformulated their magnum primers in 1989 specifically to work well with WC844, WC846, and WC852, as used by our military in 5.56 NATO, 7.62 NATO, and .30-06, respectively, and sold in burn rate controlled canister grade by Hodgdon as H335, BL-(C)2, and H380, respectively.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
December 11, 2012, 06:07 AM | #24 |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
Are the Wolf and Tulammo's primers at all corrosive or is there any down side to them ?
|
December 11, 2012, 09:24 AM | #25 |
Senior Member
Join Date: January 8, 2008
Posts: 803
|
They are not corrosive.
I've used Wolf on .223/5.56 for the last 3 years without any problems. Just had 10k of them delivered yesterday. They are good primers. |
|
|