September 22, 2009, 04:36 PM | #1 |
Member
Join Date: August 3, 2009
Posts: 78
|
lube
ok i was given a lee mold for .358 158 grain SWC. it is a tumble lube style boolit. is there a way to make a liquid bullet lube or do have to buy some?? can case lube be used in the place of a bullet lube?? thanks
dale |
September 22, 2009, 04:54 PM | #2 |
Senior Member
Join Date: April 5, 2008
Location: South Central Minnesota
Posts: 584
|
Case lube? I've not heard of that before.
I use Lee liquid alox. About $3 for a small bottle. A little goes a long way. I've heard of guys making their own lube, but I'm not sure how they do it. |
September 22, 2009, 06:52 PM | #3 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,061
|
There are lots of lube recipes, but they are usually in stick form and assume you bought a lubricator/sizer to final size the bullets and apply the lube. An alternative to Lee Liquid Alox is White Label Xlox. It's actually exactly the same thing from the same industrial source, but White Label sells larger quantities for less ($10 a quart).
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
September 22, 2009, 09:55 PM | #4 |
Member
Join Date: August 28, 2009
Posts: 88
|
If you have a friend or contact on active duty in the military in any mechanic position, see if they can grab you some Amalguard, Grade 4. It is the exact same thing as ALOX, comes in a silver 1 qt can and is everywhere in the service. They use it for corrosion protection on aluminum parts.
|
September 23, 2009, 09:25 AM | #5 |
Member
Join Date: August 3, 2009
Posts: 78
|
thanks guys! i will look into those lubes!!
dale |
September 23, 2009, 10:39 AM | #6 |
Senior Member
Join Date: August 1, 2007
Location: Tabor City , NC.
Posts: 1,969
|
TL
johnson paste wax will give good results on a TL bullet if pushed to 1,000 fps or slower .
warm the bullets toss in container teaspoon of jpw . i then stand em on end on wax paper to let em dry .
__________________
GP100man |
September 23, 2009, 11:42 AM | #7 |
Member
Join Date: March 30, 2009
Posts: 99
|
I have the same mold. I use Alox lube. A small bottle for a few bucks. I still have a half a bottle and have casted at least 3000 - 4000 bullets (maybe more). I tumble lube about 200 bullets at a time, size them with a sizing die and tumble lube them once more and let them dry overnight before loading them. Citywaterman
Last edited by Citywaterman; September 23, 2009 at 11:48 AM. |
|
|