|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 28, 2013, 08:44 PM | #1 |
Member
Join Date: December 14, 2010
Posts: 79
|
Throat, muzzle and crown on CMP M1's
My service grade M1 came with an inspection tag that says the muzzle reading is 1+. Throat reading is 1+.
What does this mean? I also note the crowning at the muzzle is pretty rough. I only got 2-3" BR grps at 100 yds. This could be the ammo(civ 150 gr) or me. The groups moved nicely with sight adjustments and I'm still learning the gun. Still, the crown looks quite raggedy. I'm tempted to clean it up my self with a hand drill and a small grinding ball. I've done this myself previously, but on muzzles that likely didn't need it anyway. The ball pretty much self centers and I turn the rifle periodically. Of cse, I go slowly and lightly. Would CMP let an inaccurate crown out on a service grade? Brian Des Moines |
March 28, 2013, 10:48 PM | #2 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
Throat measurements measure the wear caused by gases burning as it pushes the bullet out the chamber and barrel. 10 is considered max and unservicabe. Your "1" is excellent.
Muzzle wear is cause by GI's running a cleaning rod improperly down the barrel while cleaning. The Army goes crazy on this cleaning crap. My gage is out in the shop but I believe it goes from 1 - 4, indicating you have a goon muzzle. Don't get to excited about it. According to the Gage's my M1 should be worn out but it still shoots under 3MOA and is capable of cleaning the Grand target. It just won't do it when I'm standing.
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
March 28, 2013, 10:52 PM | #3 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
PS:
If you are getting 2-3 inches with that ammo STOP SCREWING WITH IT, just shoot the dern thing.
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
April 4, 2013, 11:17 PM | #4 | |
Senior Member
Join Date: December 26, 2004
Location: Louisville KY
Posts: 13,805
|
Quote:
|
|
April 25, 2013, 05:33 PM | #5 |
Senior Member
Join Date: February 15, 2009
Posts: 8,927
|
The USN marksmanship unit rebarreled their match grade Garands when the gauge read 5; typically about 4000 to 5000 rounds. Your barrel's got a lot of life left in it.
Regarding the muzzle, I've seen no degradation of accuracy if an M1's muzzle is so worn form steel cleaning rods that there's no copper wash back for 1/2 to 3/4 inch. That's evidence that the metal's been worn away quite a bit. But its the same for every shot fired; doesn't hurt accuracy. On the other hand, if the crown, the edge at the end of the rifling at the muzzle angled face is chiped or damaged, then a crowning tool will need to be used to clean it up. Last edited by Bart B.; April 26, 2013 at 03:59 AM. |
April 26, 2013, 04:50 PM | #6 |
Senior Member
Join Date: October 18, 2006
Posts: 7,097
|
For accuracy, get some Hornady M1 garand A-max loads to see what she'll do with match grade fodder. http://www.hornady.com/store/30-06-1...MAX-M1-Garand/
If you handload, there are lot of good options. Jimro
__________________
Machine guns are awesome until you have to carry one. |
Thread Tools | Search this Thread |
|
|