|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 3, 2015, 08:18 PM | #101 |
Senior Member
Join Date: March 22, 2009
Location: S.E.PA.
Posts: 920
|
To this day, I still can't figure out how I ended up with Claydot and Universal power mixed together while loading some 12ga shot shells. How I ended up with a 26 grain powder charge is another mystery. Boy did those suckers recoil.
At the time, I'd only been loading shotgun shells for 30+ years. Definitely one of those ''read the label stupid''. Ended up cutting open 4 boxes of shells. On a positive note, nobody at the club ever ask to borrow any of my ammo....lol.
__________________
NRA member, DCF&S member, PAFOA member, USPSA member, NSCA member R.I.P.____Murphy |
April 3, 2015, 09:05 PM | #102 |
Senior Member
Join Date: March 2, 2014
Posts: 11,784
|
deleted to avoid ejection
__________________
"Everyone speaks gun."--Robert O'Neill I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk! Last edited by stagpanther; April 3, 2015 at 09:19 PM. |
April 3, 2015, 10:11 PM | #103 |
Senior Member
Join Date: January 11, 2015
Posts: 330
|
Well, I been reloading 26 years. I had never done anything dumb until recently. Within the last year.
First foul up: I stuffed pistol primers in a few '06 cases. Yeah, it ain't pretty when those primers fracture. Second foul up: I did it tonight!!!!!!!! I was attempting to slug a 336 Marlin, 35 Remington barrel and never thought to check the end of the barrel, to see if the dowel i was using to drive the chunk of lead through the barrel, would fit through the barrel. Well, it slid right through the action and chamber and rested on the lead slug at the end of the chamber. I thought, "No problem.". I took my rubber mallet and started tapping on the dowel and it started just fine and then got tough. I kept tapping on it rationalizing that it might be harder than I had thought. As, i have never slugged a barrel and didn't know what to expect. Well, I started getting a bit more aggressive with my taps and, after about 10 of those I was starting to ponder whether I should stop and reevaluate things when the dowel broke off at the end of the action where the bolt comes out. As I type this, it is still stuck in the barrel at it has broken and mushroomed the tip on 4 different carbon arrows I tried to knock it back out with. I'm not sure how to get it out really. I was/am so flipping -CENSORED--CENSORED--CENSORED--CENSORED--CENSORED--CENSORED- at myself. So, i stopped before my anger gets the best of me and, I end up sticking something metal down the barrel and use it to drive it out. I have got to clear my head and regroup. I have this problem. I'm my own worst enemy in a lot of ways. I'm one tracked sometimes. I get in a hurry all the time. I get my mind of 75 different things I need to be doing instead of what I am doing and stuff like these two things happen. I tend to rush through things that I do for myself and it always ends up like this. I'm at fault but, I'm so aggravated right now at everything. It'd be nice to see some help here. It'd be nice to be able to look at my beautiful wife and realize she was actually getting better instead of getting worse. It'd be nice to wake up one day without having to be the answer for every one I know. It'd be nice to just be able to do a few things without the phone ringing and/or someone needing something that requires my time. I been trying to get this done for 3 weeks. This has become the ordinary for 5 years though. So, I should be getting used to it and, be better prepared for the ME element that takes something simple and pleasurable and, ends up turning it into a disaster. It'd be nice to awake with a clear mind and get that dang dowel out of my prized 336 without making a bigger mess. I could use some prayers. God Bless |
April 4, 2015, 07:31 AM | #104 |
Senior Member
Join Date: August 23, 2008
Location: East shore of Lake Michigan.
Posts: 714
|
@ WVMountaineer
You can push the bullet out hydraulically...using an aluminum rod and small hydraulic jack mounted horizontal, be sure that the valve for the jack is on the down side...as in toward the floor. Keep the rod as short as possible. Of course you have to fabricate a way to how things up, but that will be no problem.
__________________
Sent from my Tandy 1000 |
April 6, 2015, 04:28 PM | #105 |
Junior Member
Join Date: July 9, 2001
Location: Allentown, PA
Posts: 10
|
Ok, Ok, Uncle!
Been reloading for about 45 years now. I learned not to "pour" loaded rounds into containers (when one goes off, the bullet stays right where it is, but the brass sure does some damage!) or drop them onto concrete floors (yes they CAN go off), not to mix powders (you have to throw it ALL away), not to use substandard components (in the bottom of the box at an auction, for example). But I'll tell you about my first self-imposed problem back in the early 70s.
I reloaded about 100 .357 magnums so my brother, father and I could go out plinking. They were medium loads, fairly weak, more of a stronger 38 special. When it was my brother's turn to shoot, he loaded five into one of our two Dan Wessons and proceeded to miss the target altogether for the first three shots. We busted on him a bit (ok, quite a bit), until he walked up to 10' away and shot the target...no hole! The last one was in the dirt at his feet....nothing came out. I think we all turned white at this point. We rolled the cylinder out and started looking at the barrel...you could see a bullet in the muzzle, you could see another just past the forcing cone, and after we took the shroud off and placed the barrel in my father's x-ray machine, 3 in between those two. Man, were we lucky. My father is gone now, but my brother still remembers to bust my chops about it once in a while. I have three Dan Wessons, and I'll testify to their strength...and unfortunately, also to my young stupidity. I probably have not shot a factory round in 20 years, except occasional surplus...thanks God for reloading...and lessons learned. |
April 15, 2015, 05:43 PM | #106 |
Senior Member
Join Date: August 23, 2008
Location: East shore of Lake Michigan.
Posts: 714
|
Lets get this thread going again folks. Surly there are more oop's around
waiting to be told.
__________________
Sent from my Tandy 1000 |
April 15, 2015, 09:56 PM | #107 |
Senior Member
Join Date: February 8, 2010
Location: MN
Posts: 437
|
Well lets see...
I set off an empty primed .243 case in a bench vise with a hammer and punch back when I thought decapping live primers was a big no-no. Shrapnel flying as the primer disintegrated and left my ears ringing. Scared the heck out of me though! Not expecting that much force from "just a primer." I think I was at least wearing safety glasses... I've charged a few primer-less casses. Really notice it when it's a .30-06 with H335 pouring out of the flash hole. Forgot to change out the crimp die from the Co-Ax after the last batch and tried using it to seat a bullet. That didn't work. These seem to be little as far as danger levels go, but all good reminders to keep my head on straight. |
April 16, 2015, 02:58 PM | #108 |
Senior Member
Join Date: August 2, 2014
Location: Virginia
Posts: 484
|
Reading the hammer and punch story, reminded me of one of my foolish exploits of youth. This may not qualify as a legitimate reloading incident, but it's a true story, and involves powder in a cartridge. I was probably 8 years old when my older brother, then 14, engaged me to assist in what I think now was a .45 ACP experiment. He scratched open dozens of cap pistol caps, gathering the black powder, which he put in a cap-primed .45ACP case. we loaded it with a wad of aluminum foil, fashioning a bullet of sorts. I held the cartridge with a pair of vise grips on a large rock while he used a hammer and a punch to detonate the round. A loud explosion ensued, we never found the aluminum foil, and neither one of us was hurt. We thought it was pretty cool. But never repeated the experiment.
|
April 17, 2015, 03:33 PM | #109 |
Member
Join Date: March 17, 2015
Posts: 54
|
This was almost bad
First time reloading. Have my press all set up. I ran a dummy round through and got the bullet setting depth pretty close to where I want it. Same with the crimp die.
All I need to do now is adjust the powder measure. Oh wait I need to use this new scale I bought to measure the powder. I read the scale instructions, follow the calibrate procedure. No problems. I back the out powder measure adjustment and measure a charge. It's really light, ok I need to adjust the charge. do another, still light. adjust, repeat. After about the fourth or fifth check it seems like that's a lot of powder but still way below the listed starting charge. That's when I realize the scale mode is set to grams, not grains. So my 4.5 grams of powder would have been a 15 times overcharge! Now I make sure to check the scale mode every time I turn it on! |
April 17, 2015, 05:27 PM | #110 |
Senior Member
Join Date: January 22, 2015
Posts: 109
|
Spilled a tray of primers, did a half @$$ attempt at picking them up, forgot about them. Remembered them abruptly a few weeks later when my vacuum ate them. I may have tinkled a little.
|
April 18, 2015, 07:07 AM | #111 |
Senior Member
Join Date: September 2, 2012
Location: N.central Pa.
Posts: 302
|
Not really dangerous but I felt dumb. It also taught me not to allow distractions. I load single stage and was charging some .45 acp cases one after noon when my son in law walked into my den. He seemed interested and asked me about the different steps. I explained everything as best I could and got to the part on weighing powder and charging cases. I then weighed a charge of Titeroup and dumped it into the funnel in my Lee powder through expanding die. Whoops, I forgot to run the ram up and the powder went all over the place. I calmly said, "and always pay attention to what you are doing, some mistakes are not as forgiving as this one".
__________________
Gun control means: Being able to hit what you are shooting at. |
April 18, 2015, 07:18 AM | #112 |
Senior Member
Join Date: August 23, 2008
Location: East shore of Lake Michigan.
Posts: 714
|
Yup, I've done the same thing with my Lee Classic Turret (a few times), but
with out being distracted. Gee's, did I really just admit that ?
__________________
Sent from my Tandy 1000 |
April 18, 2015, 01:34 PM | #113 |
Senior Member
Join Date: January 15, 2008
Location: PRK
Posts: 735
|
HOT HOT HOT
I once dropped a charge for a 125 grain bullet under a 158 grainer for .357 magnum. did 50 rounds and went to the range. Needless to say, they were way overpowered. Thank goodness for the robust older K-frame S&W revolvers. No damage done, but I am much more careful now with my double checking of things. That happened well over 20 years ago, and I have not forgotten. A J-frame may not have fared so well.
__________________
I ain't got no safe queens. I shoots em all... |
April 18, 2015, 01:44 PM | #114 |
Senior Member
Join Date: April 18, 2014
Location: North Carolina
Posts: 2,320
|
I got a 7.62x54R case stuck in a 7.5x55 Swiss Die.
Thankfully never done that again. My K-31 ammunition supply was cut short until I got it functioning again Thanks To YouTube and my Grandfather's machine shop. I've double charged some cases too, but it's pretty easy to notice when you do that, though.
__________________
Proud owner of three (four-ish) pieces of history! K-31, Mosin-Nagant M91/30, M24/47 Mauser, Norinco SKS. "You might as well appeal against a thunderstorm..." William Tecumseh Sherman |
April 21, 2015, 11:00 PM | #115 |
Member
Join Date: March 3, 2015
Location: Temple, TX
Posts: 30
|
Only been reloading a few months, couple thousand pistol rounds. Had some old .45 rounds from my great-grandfathers house after he passed, probably been in his non climate controlled shed for 50 yrs. I decided to try some. I was smart enough to check for signs of pressure. Fired 3 rounds out of my kimber. First one minor crack, second split neck, last one split 2/3 way down! No damage to my gun thank goodness.
Fun didn't stop there. I decided to pull the bullets. Got the bullets all pulled and wanted to recycle the brass. Wasn't sure if I could leave unspent primers in and take to a recycler so I took a hammer and nail to them. Each one went "poof" with little noise, black spot on the garage floor. Unfortunately, this left me with little respect for primers. Tried the same thing a week later with a round I found at the range. Pulled the bullet, hammer and nail to the primer, Bang!!!! Brass case disappeared, wife came running thought I was dead. Eventually found the case, split open like a banana. Never again.... |
April 22, 2015, 01:51 PM | #116 |
Senior Member
Join Date: August 27, 2008
Location: Owasso, OK
Posts: 334
|
Post this one under "Bill Ruger saved my dumb a--"
Ran off about 500 .357 loads for a bowling pin shoot. Paying more attention to wanting to "get r done" than to what I was doing. At the shoot, the first shot had lots of recoil and the action jammed. Inspection found that the primer was pushed completely out of the case, jaming the action and you could read the head stamp on the recoil shield. Gun was a 6" GP-100. Stopped using that ammo. At home I pulled a few bullets and determined I had improperly adjusted the power scale to 15.0 gn instead of 10.5 gn (Blue Dot w/ 158 gn jacketed bullet). Had to pull all 500 bullets and reload using correct amount of powder. The Ruger carried on without a hitch. Wonder what the pressure was? Probably only a Ruger could survive that without any damage. |
April 22, 2015, 04:12 PM | #117 |
Senior Member
Join Date: August 23, 2008
Location: East shore of Lake Michigan.
Posts: 714
|
@ Jimbo-Indy
Sir, that was one heck of a proof load there. Hey, while pulling 500 bullets, were you singing...(500 Bottle Of Beer On The Wall) ?
__________________
Sent from my Tandy 1000 |
May 29, 2015, 10:54 AM | #118 |
Member
Join Date: January 21, 2015
Posts: 33
|
Just got distracted and tried to de-prime my trigger finder.. I succeeded in re-sizing it a little. Screamed out in languages I don't even know.
|
May 29, 2015, 04:22 PM | #119 | |
Senior Member
Join Date: January 8, 2008
Posts: 803
|
Quote:
|
|
May 29, 2015, 04:44 PM | #120 |
Senior Member
Join Date: November 22, 2006
Posts: 3,077
|
I tumbled 50 BMG brass with 45 ACP once. Once.
|
May 29, 2015, 05:43 PM | #121 |
Senior Member
Join Date: November 18, 2007
Location: Colorado
Posts: 1,053
|
About 8 years ago I loaded up 100 rnds of .45 Colt. Went to the range, loaded 6 rounds into the cylinder, pulled the hammer back and fired, completely missing the target. Hmmm...thats odd I thought. Fired a second shot that hit the bottom right corner of the target and thats when I realized something was wrong. The shot sounded more like a .22lr as opposed to a .45. After a few seconds, I shrugged thinking it was just my imagination. I fired a third time. No bullet impact on the target and again, it sounded like, and recoil wise, felt like I was shooting a .22lr. I was just about to fire a fourth shot when that little voice inside my head said "WHOAAAA...hold up there pardner!!!" I removed the cylinder from the gun and shone a flashlight done the bore. Complete darkness. Packed up, went home and spent a half hour with a wooden dowel and hammer tapping out the bullet stuck in the bore...and another 2 hours pulling bullets with an RCBS inertia bullet puller.
To this day, I still have no idea how I managed to load 100 rnds without a powder charge. Second dumbest thing I (almost) did: I thought a .311 Sierra 174gr HPBT would make a great bullet for the 7.62x39mm. There was that voice again! Last edited by Darren007; June 1, 2015 at 08:40 AM. |
May 30, 2015, 05:27 AM | #122 |
Senior Member
Join Date: September 29, 2013
Location: North Central Pennsyltucky
Posts: 749
|
Darren,
I've done the same thing-once! Did it with my .250 Savage in a Ruger 77 Ultralight. A round that sounded light stopped my loading-pulled the bullets and found one not charged with powder. I attributed it to two things: using a single stage press and how my components were lined up on my bench. Best solution (and actually pretty quick) is to do a quick weigh of each round to determine if any are light. I have several scales: RCBS 5-0-5, a Frankfort Arsenal digital and an old Ohaus balance beam lab scale. Took only minutes to go through 100 rounds of .45 Colt this pst week to verify all were properly loaded. |
May 30, 2015, 09:42 AM | #123 |
Senior Member
Join Date: August 23, 2008
Location: East shore of Lake Michigan.
Posts: 714
|
@ Darren007
Wow, you might want to invest in a collet bullet puller for situations like that, BEAT'S the hack out of beating with the inertia puller.
__________________
Sent from my Tandy 1000 |
May 31, 2015, 01:46 AM | #124 | |
Senior Member
Join Date: November 18, 2007
Location: Colorado
Posts: 1,053
|
Quote:
|
|
June 1, 2015, 10:34 AM | #125 |
Member
Join Date: May 29, 2015
Location: wisconsin rapids, wi
Posts: 38
|
had expander set wrong and shaved a .356 cast round to .353
they tumbled real good coming out of the barrel |
|
|