The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools Search this Thread
Old January 28, 2018, 05:05 PM   #1
Fuzzymaster
Member
 
Join Date: January 6, 2009
Posts: 89
What cartridge is this?

Unfortunately I don't have a pic yet. My nephew has this cartridge that I will try to describe.
Appx 2" in length, neck case, rim fire with a U head stamp. I would guess it be at least 30 ga and probably slightly larger. Loaded with a lead round nose bullet.
I will try and get a picture of it this week.
Fuzzymaster is offline  
Old January 28, 2018, 06:00 PM   #2
Buzzcook
Senior Member
 
Join Date: November 29, 2007
Location: Everett, WA
Posts: 6,126
Without pictures no one can help you and even experts need more than approximate measurements.
Just so you know 30 gauge or bore is .537".
http://www.hallowellco.com/bore_size_chart.htm
Buzzcook is offline  
Old January 28, 2018, 06:12 PM   #3
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 18,483
Awaiting picture and real measurements.
Jim Watson is offline  
Old January 28, 2018, 08:15 PM   #4
jonnyc
Senior Member
 
Join Date: July 20, 2009
Location: PA
Posts: 1,731
A .50-70 Govt?
__________________
2024 PA Cartridge Collector Show; Aug. 16-17, 2024!!!
Buy...Sell...Trade All Types of Ammunition & Ordnance
PM or email me for 2024 show details.
jonnyc is offline  
Old January 28, 2018, 09:21 PM   #5
sgms
Senior Member
 
Join Date: May 30, 2010
Location: Arizona or Ohio depending
Posts: 1,021
A wild guess, maybe you mean a .30 caliber long rimfire? If memory is correct .30 dia., app. 1.75 inches long, lead bullet blackpowder loaded from the late 1800's. My W.A.G. without pics. and good measurements.
sgms is offline  
Old January 28, 2018, 10:45 PM   #6
birdshot
Senior Member
 
Join Date: January 17, 2008
Location: north platte nebraska
Posts: 344
rimfire narrows it down quite a bit. My guess would be for the 56-46 Spencer.
birdshot is offline  
Old January 29, 2018, 02:16 AM   #7
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 28,675
The letter "u" on a rimfire case usually means it was made by the Union Metallic Cartridge Co, or by Remington, after they took over UMC.

I do not think there were ever any .,50-70 cartridges that were rimfire. There were early cases that used an inside primer, but they were centerfire. Those cases LOOK like rimfires, (unfired) because there is no primer visible in the center of the case.

Please, MEASURE the round, with calipers or a micrometer. Give us the measurements of the case in all the details you can, rim diameter, case head diameter, shoulder & neck diameter, overall length, etc.

If at all possible when you get a pic, put a ruler or something for scale.

There are several rounds it could be. Without accurate measurements all we can do is guess. We have extensive references but need measurements to use them.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is offline  
Old January 29, 2018, 08:01 AM   #8
Fuzzymaster
Member
 
Join Date: January 6, 2009
Posts: 89
I will post picture and measure mints this fri. Interesting that it could still be a centerline.
Fuzzymaster is offline  
Old January 29, 2018, 09:27 AM   #9
OzeanJaeger
Senior Member
 
Join Date: September 8, 2014
Posts: 301
.32 Win Special?

Assuming .30 cal and not ga...
OzeanJaeger is offline  
Old January 29, 2018, 10:20 AM   #10
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
U, as .44 AMP notes, was a headstamp used by either Union Metallic Cartridge company or Remington-UMC.

A single U with nothing else on the headstamp was used ONLY on rimfire ammunition.

"neck case"

Assuming that means a bottle necked case, which eliminates .30 caliber rounds. I know of no .30 caliber bottlenecked rounds that were rimfire from that era.


"I would guess it be at least 30 ga."

30 gauge, as others note, is approximately .52 caliber. That and the length of the round narrows it down, but it's still difficult as we're having to make a lot of assumptions.



"There were early cases that used an inside primer, but they were centerfire. Those cases LOOK like rimfires, (unfired) because there is no primer visible in the center of the case."

The only issue with that is that internally primed centerfire cases did not have centered headstamps -- it could interfere with the priming. Late internally primed military cartridges had headstamps, but only around the rim, nothing in the center.




My best guess, based on the very limited information we have? I think chances are good that it's a .56-50 Spencer cartridge.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old January 29, 2018, 02:03 PM   #11
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
"...50-70 cartridges that were rimfire..." .56 Spencer maybe? Or .52 Sharps?
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old January 29, 2018, 03:34 PM   #12
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
There was never a .50-70 rimfire.

Sent from my SCH-I545 using Tapatalk
Mike Irwin is offline  
Old January 29, 2018, 03:47 PM   #13
ms6852
Senior Member
 
Join Date: April 3, 2010
Location: Texas
Posts: 1,394
Maybe a 56/56 or 56/50 hard to tell without pictures and dimensions.
__________________
ONLY TWO DEFINING FORCES HAVE GIVEN UP THEIR LIVES FOR YOU. ONE IS JESUS CHRIST FOR YOUR SOUL AND THE OTHER IS THE AMERICAN SOLDIER FOR YOUR FREEDOM.
ms6852 is offline  
Old January 29, 2018, 08:41 PM   #14
jonnyc
Senior Member
 
Join Date: July 20, 2009
Location: PA
Posts: 1,731
"measure mints"

yummy!
__________________
2024 PA Cartridge Collector Show; Aug. 16-17, 2024!!!
Buy...Sell...Trade All Types of Ammunition & Ordnance
PM or email me for 2024 show details.
jonnyc is offline  
Old January 29, 2018, 09:13 PM   #15
BillM
Senior Member
 
Join Date: January 20, 2009
Location: Amity Oregon
Posts: 791
If the OP meant caliber instead of gauge it could be 38 extra long rimfire. Not
much else out there that's 2" OAL.

There is 58-60-500 rimfire from the 1865 first Allin conversion---or possibly the
OP has a inside primed 45-70 or 50-70 and thinks it's rimfire because no centerfire
primer is visible?
BillM is offline  
Old January 31, 2018, 05:11 PM   #16
cheatin charlie
Member
 
Join Date: July 12, 2009
Posts: 54
Just a quick correction there were 50-70 rimfire cartridges manufactured. I had some at
one time. They were not inside primed but true rimfire copper cased. No head stamp on the case. Very rare to find today. Catridges of the World lists 50-70 rimfire diminsions.
cheatin charlie is offline  
Old February 1, 2018, 06:50 AM   #17
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
"Just a quick correction there were 50-70 rimfire cartridges manufactured."

Yep, you're right, there was. I was wrong.

Apparently made only for a year or two, the transition between the rimfire .58 Allin and the centerfire .50-70.

There are mentions that the .50-70 was derived from the .50-60 Joslyn.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old February 11, 2018, 04:58 AM   #18
Gaucho Gringo
Senior Member
 
Join Date: May 17, 2007
Location: Vancouver, WA
Posts: 366
Apparently another drive by post wasting forum members time.
__________________
357 Taurus Gaucho, 22 Heritage RR, 2-Pietta 1858 44 NMA Remingtons, Pietta, Euroarms & ASM 36 1851 Navies, 31 Uberti 1849, 12 ga H&R Topper, 16 Ga Western Field, 43 Spanish Remington Rolling Block, 44 ASM Colt Walker, High Point C9 9mm, Winchester 1906 22, Rossi 62 22 rifle, Uberti 1860, H&A & IJ 32 S&W BreakTop, 36 Euroarms 1858, 32 H&R 04, 22mag NAA SS BP revolver, .44 Rodgers & Spencer, IJ 38 S&W BreakTop, IJ 22 Sealed 8
Gaucho Gringo is offline  
Old February 11, 2018, 02:32 PM   #19
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
The first cartridge that comes to mind is .41 Swiss.

Jim
James K is offline  
Old February 11, 2018, 03:38 PM   #20
wild willy
Senior Member
 
Join Date: March 8, 2006
Posts: 403
Gaucho Gringo That’s what it appears to be.It happens a lot even though a person(myself) doesn’t post a response doesn’t mean they aren’t interested in knowing.It seems to happen a lot in the firearms and reloading sections someone has a problems post a question and you never see them again
wild willy is offline  
Old February 12, 2018, 10:09 PM   #21
Blindstitch
Senior Member
 
Join Date: April 14, 2013
Location: Milwaukee, Wisconsin
Posts: 2,685
I'm thinking 17hmr. Rimfire, 30ish grain projectile and 1.349 inch length and maybe a rubber longer tip.

Maybe .17 Winchester Super magnum 1.440 in (36.58 mm) to 1.590 in (40.39 mm
__________________
NRA Lifetime Member
Blindstitch is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.09843 seconds with 10 queries