July 12, 2010, 06:37 PM | #26 |
Junior Member
Join Date: July 12, 2010
Location: Fountain Valley
Posts: 1
|
Sportsman Steel Safes
Three of my friends have Sportsman Steel Safes and we love them! They have really heavy doors like old bank vaults with step-like seals. Way better and heavier than gun safes I saw at gun shows. Go take a look. They're really good. www.sportsmansteelsafes.com
|
July 12, 2010, 09:30 PM | #27 | |
Senior Member
Join Date: November 28, 2005
Location: St. Charles, MO
Posts: 496
|
Quote:
__________________
www.zykansafe.com |
|
July 13, 2010, 02:17 PM | #28 |
Senior Member
Join Date: October 16, 2009
Posts: 195
|
Don't forget Sturdy Safes
I have a Sturdy Safe (just google them). Couldn't be happier. It's commercial grade and big enough to hold all the guns I reasonably want or would ever inherit. It has fire lining, 7 gauge steel all over, and a reinforced plate around the lock mechanism. I have it bolted to the floor in my garage. They don't advertise, but their website convinced me they were the best for the money. And their customer service is the absolute best.
Good luck in your serach. |
July 13, 2010, 08:03 PM | #29 |
Junior Member
Join Date: July 3, 2010
Location: South of St Louis, Missouri
Posts: 14
|
a1abdj,
Obviously you are very well versed in this subject since it appears you're associated with Zykan Safes. Can I ask about a brand that has not been mentioned. Please let me know your thoughts and opinion. ---------------------------------------------------------------------- Mesa Constitution Safe Model: MBF6032E-P Standard Electronic lock, A Fully upholstered gray interior and Massive 1 1/2" Diameter LIVE locking bolts make this safe a must have. Standard textured black finish, Decorative brass five spoke handle Mesa's Constitution safe is designed to protect your valuables against fire, theft, and accidents. Safes use live locking bolt technology and pry resistant metal to ensure the most secure protection of its contents. The security safe accomplishes a peace of mind that you and your family are safe from the unthinkable. "Better Mesa Safe Than Sorry" Specifications 1 HOUR FIRE RATING-Battry Operated ELECTRONIC LOCK protected by a hardened DRILL RESISTANT plate-Interior shelving walls and door FULLY UPHOLSTERED-Massive 1 1/2" diameter LIVE LOCKING BOLTS- FOUR ANCHOR HOLES- STEEL DOOR with an overall thickness of 3 3/4" enclosing fire resistant material-All Shelf Model-Meets or exceeds CA dept of Justice Firearm storage device requirements 14.4 Interior Cubic Feet 59" x 32" x 22" Assembled in China |
July 13, 2010, 09:41 PM | #30 |
Senior Member
Join Date: November 28, 2005
Location: St. Charles, MO
Posts: 496
|
Mesa offers a variety of imported safes, and this gun safe appears to be a typical imported unit. I don't see anything special about it, especially considering the price. They give a lot of vague information, such as "overall thickness", when neglecting to give you specifics about its construction. This type of stuff sets off warning bells with me.
We just started selling a private labeled safe that will compete with the AMSEC BF series (that we also sell). It is a B rate commercial safe (1/4" body, 1/2" door) that is built out as a gun safe. It doesn't appear to cost much more than the Mesa you mentioned.
__________________
www.zykansafe.com |
July 15, 2010, 11:46 PM | #31 |
Junior Member
Join Date: July 7, 2010
Posts: 14
|
Can you tell us more about this B rated safe? It's certainly a great price for a B rating but how well made is it? And how does it compare to the Amsecs you sell?
|
July 16, 2010, 10:52 AM | #32 | |
Senior Member
Join Date: November 28, 2005
Location: St. Charles, MO
Posts: 496
|
Quote:
Essentially, we were looking for a safe that could sell at a price point beneath the AMSEC, as we have other similar safes that sell for more than the AMSEC. Both the AMSEC and our new safe are built heavier than most all other safes in their price range. They both have a 90 minute fire rating achieved by using a "cement" fill that also ads to their strength. The AMSEC has the edge when it comes to the door. The AMSEC uses a solid 1/2" plate, where our new safe uses multiple plates for a cumulative thickness. The AMSEC also has a nicer fit and finish, and a really nice interior. The new safe has the edge when it comes to the body. The AMSEC uses an 11 gauge outer wall with thinner inner wall. This new safe uses dual 10 gauge plates for the outer and inner walls for a total of 1/4" worth of steel in the body. Both safes use UL rated locks. The AMSEC uses a mechanical relock system and locks on three sides. The new safe uses a mechanical relock system in addition to a glass plate relock (found on higher end commercial safes), and locks on all four sides. The new safe also uses some longer bolts that are reinforced on the door better, which would give better pry resistance. The easiest way to make a less expensive safe is to get rid of the expenses that have nothing to do with the security of the safe itself (paint, interior, etc.). That's what we have done here. The safe itself is a good safe, but it's bare bones. Utilitarian, but nothing fancy.
__________________
www.zykansafe.com |
|
July 16, 2010, 02:24 PM | #33 |
Senior Member
Join Date: December 10, 2008
Location: S.C.
Posts: 1,454
|
I made the mistake of not buying a safe big enough for the future.
__________________
Familiarity breeds contempt, while rarity wins admiration. Aupleius If someone doesn't like you, that's their problem! Milton Childress |
July 16, 2010, 08:44 PM | #34 | |
Senior Member
Join Date: November 19, 2008
Posts: 259
|
Quote:
|
|
July 16, 2010, 09:07 PM | #35 | |
Senior Member
Join Date: November 28, 2005
Location: St. Charles, MO
Posts: 496
|
Quote:
Sometimes multiple smaller safes are better than a single larger safe. This is also true in situations where you need to spread out the weight, or are dealing with concealment issues.
__________________
www.zykansafe.com |
|
July 17, 2010, 08:18 AM | #36 |
Senior Member
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
|
Simple, like anything else, get the best you can afford.
Some of us cannot afford top of the line. Mine is a Grizzly ten gun. I am confident it is secure. Downside is that it does not have insulation for fire protection. |
July 17, 2010, 03:20 PM | #37 | |
Senior Member
Join Date: November 19, 2008
Posts: 259
|
Quote:
|
|
July 17, 2010, 03:29 PM | #38 | |
Senior Member
Join Date: November 28, 2005
Location: St. Charles, MO
Posts: 496
|
Quote:
The first people who regret stuffing everything into a single large gun safe are those that have their safes in a fire. When they should have purchased a second safe with a real fire rating, they figured the manufacturer was correct that they could use the safe for all of their valuable paperwork, photographs, etc. These things are usually destroyed in gun safes that have been in a fire. Although there are similar reasons that can be applied for residential security, look at the commercial stuff next time your out. For the most part, everybody uses multiple safes or single safes with multiple compartments to spread the risk.
__________________
www.zykansafe.com |
|
July 17, 2010, 06:21 PM | #39 |
Junior Member
Join Date: July 7, 2010
Posts: 14
|
I currently have a safe that is almost full and I am going to purchase another one. My primary reason is to upgrade my protection since my collection is now worth more then I originaly anticipated.
My new safe will go in the corner of my basement and the old one will be bolted down right next to it. That will limited access on 3 sides. And although this safe will have fire protection, any important documents will go inside a smaller Sentry type fire safe, that will reside in the larger safe, for extra protection. |
July 17, 2010, 09:30 PM | #40 | |
Senior Member
Join Date: November 19, 2008
Posts: 259
|
Quote:
|
|
July 19, 2010, 11:19 AM | #41 | |
Junior Member
Join Date: July 3, 2010
Location: South of St Louis, Missouri
Posts: 14
|
Quote:
What about the Theftgard 12/24 Gun Safe? Is it adequate for bot theft and fire, etc.? Here is what I was sent: Theftgard Features 12-gauge steel body 1in. steel bolts 3/16in. steel plate door Group II lock with five-year limited warranty UL tool attack listed Straight brushed chrome handle Scroll graphic on door Duo Interior with gray carpet Rugged textured finish Elevated floor to facilitate removal of guns 1200 degrees/30 min. Standard Fire Protection 1200 degrees F/30 min. fire protection One layer of 1/2in. fire-resistant material in the body Two layers of 1/2in. fire-resistant material in the door SPECIFICATIONS: Dimensions: 60" X 30" X 22" Cubic Feet: 23 Weight: 510 lbs. Gun Capacity/Configuration: 12/24 Duo Fire Protection: 1200° F/30 min. fire protection Thanks Bill |
|
July 19, 2010, 02:23 PM | #42 |
Junior Member
Join Date: July 7, 2010
Posts: 14
|
Don't make the same mistake I did and get a 12 gauge safe. I feel like I could probably punch through it, even with the fire lining.
|
July 20, 2010, 04:32 AM | #43 |
Senior Member
Join Date: February 18, 2006
Location: The Dodge House, NC
Posts: 183
|
Gun Safes
I have 2 Liberty - Lincoln Models
My next one will be the same.
__________________
"A Man's got to have a Code, a Creed to Live By, No Matter his Job" |
July 20, 2010, 06:03 PM | #44 | |
Senior Member
Join Date: May 28, 2009
Posts: 107
|
Quote:
__________________
...probably the greatest concentration of talent and genius in the white house except for perhaps those times when Thomas Jefferson ate alone. John F. Kennedy, Describing a dinner for Nobel Prize winners, 1962 |
|
July 22, 2010, 09:52 AM | #45 |
Member
Join Date: February 6, 2009
Location: Southern NJ
Posts: 27
|
I went Fort Knox for 2 of my safes. I have a large collection. But even they were not enough room. I picked up a safe at Sams club. Couldn't be happier with it.
Check out the cannon safes. Here is the link. Some are made in the USA http://www.samsclub.com/sams/search/...CategoryId=all http://www.cannonsafe.com/about-cannon/ |
July 22, 2010, 01:57 PM | #46 |
Junior Member
Join Date: July 7, 2010
Posts: 14
|
What gauge steel are the Cannons?
|
July 22, 2010, 03:18 PM | #47 |
Member
Join Date: February 6, 2009
Location: Southern NJ
Posts: 27
|
Most are 12 gauge bodies, The safari line has 10 gauge
|
July 22, 2010, 06:40 PM | #48 |
Member
Join Date: May 22, 2006
Location: South Florida
Posts: 76
|
I have the Cannon Oxbow series (comparable to the Patriot) that I bought from Buds gun shop. Cost was 699 delivered. I have it bolted to my garage wall and my garage floor. I never open it when the garage door is open. I built a plywood cabinet around it and mounted old license plates on the door-which has 3 padlocks on it. I have had it about 2 years and open it often (it has a dial lock which I prefer). The tumbler is also key locked and can't be opened if it is locked. It serves my purpose.
|
July 22, 2010, 10:16 PM | #49 |
Senior Member
Join Date: July 6, 2010
Location: OTS
Posts: 1,035
|
Cannon Traditional Series:
HIGH SECURITY DOOR: Massive 2-1/4" double-steel composite door 1.5" Active-locking bolts - top, side and bottom High-security commercial grade Type 1 electronic lock Surefire multiple re-lockers 3 layers extra-hard, 60+ RC steel hard-plate protects the lock Double-steel reinforced door frame Deluxe 5-spoke handle BODY: Unibody construction with rounded edge Multi-step paint process Deluxe graphics package with hand finished pinstriping* Pre-drilled bottom for bolting to floor Heavy 10-gauge |
July 28, 2010, 01:09 AM | #50 |
Senior Member
Join Date: July 6, 2010
Location: OTS
Posts: 1,035
|
Does anyone have a website for Canon/Oxbow Safes? All I seem to find on them is that its made for Bud's Gun Shop by Canon. It seems that this is not the same as Cannon Safes. There is no mention of Oxbow series on the Cannon Site.
This is the best I've seen so far: http://www.securitysafeoutlet.com/catalog/index.php I would like to see a picture and a data sheet on this. |
|
|