|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
August 16, 2017, 11:59 PM | #1 |
Member
Join Date: June 30, 2013
Posts: 38
|
New threaded barrel on milspec 1911
It goes on, chambers and ejects the round, slide lock installs and works, slide goes all the way forward like it should, safety switches on and off like it should.
Everything works like it should but the barrel is so much tighter and it looks like it fits the barrel lugs) but might not be locking quite as deep into the slide as the sloppy, even the lugs are loose on the original barrel (and its still one hell of a shooter as loose as it is). It looks like at least 75% as deep If all the mentioned above works as it should, is it in batory enough to shoot? |
August 17, 2017, 05:54 AM | #2 |
Senior Member
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 3,609
|
You may want to use some layout dye( or a sharpie) and mark the lugs on the barrel. Assemble and rack the slide a few times. Should give you a good indication of how they are engaging.
If in doubt, take it to a professional. |
August 21, 2017, 03:09 PM | #3 | |
Senior Member
Join Date: December 17, 2005
Location: Swamp dweller
Posts: 6,187
|
Quote:
__________________
NRA Life Member, NRA Chief Range Safety Officer, NRA Certified Pistol Instructor,, USPSA & Steel Challange NROI Range Officer, ICORE Range Officer, ,MAG 40 Graduate As you are, I once was, As I am, You will be. |
|
Thread Tools | Search this Thread |
|
|