New Timney Elite problem

Iwanttoshootbettter · March 19, 2017, 08:24 AM

Had a smith install new timney on my REM SPS Varmint 308win.Went to range Friday went to clean gun Saturday the bolt release tab was stuck and bolt would not stay in had to manually pull release tab down nothing hitting the stock what can do this thanks

hooligan1 · March 20, 2017, 06:28 AM

The bolt release runs up the side of the trigger, and is being impinged by the stock, find the part of inletting its rubbing on and gently removed it..

Scorch · March 20, 2017, 11:55 PM

That is a fairly common problem with the Timney 510 trigger for the Remington 700. The little tab on the end has to be tweaked just right or it will continue to be a problem.

March 19, 2017, 08:24 AM	#1
Iwanttoshootbettter Member Join Date: November 16, 2016 Location: Laporte Texas Posts: 79	New Timney Elite problem Had a smith install new timney on my REM SPS Varmint 308win.Went to range Friday went to clean gun Saturday the bolt release tab was stuck and bolt would not stay in had to manually pull release tab down nothing hitting the stock what can do this thanks

March 20, 2017, 06:28 AM	#2
hooligan1 Senior Member Join Date: July 18, 2010 Location: Independence Missouri Posts: 4,585	The bolt release runs up the side of the trigger, and is being impinged by the stock, find the part of inletting its rubbing on and gently removed it.. __________________ Keep your Axe sharp and your powder dry.

March 20, 2017, 11:55 PM	#3
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	That is a fairly common problem with the Timney 510 trigger for the Remington 700. The little tab on the end has to be tweaked just right or it will continue to be a problem. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services