The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools Search this Thread
Old March 9, 2018, 10:47 PM   #1
Hummer70
Senior Member
 
Join Date: June 22, 2009
Location: South Carolina
Posts: 188
Ever thought about using graphite as lubricant? Don't

https://drive.google.com/file/d/1S1T...ew?usp=sharing
__________________
Distinguished Rifleman High Power & Smallbore Prone
President's Hundred (Rifle) US Palma Teams(2)
US Dewar Team (2),4 Man Natl.Champ Team SB Prone
Cert Test Dir. Sm Arms and Ammo,Aberdeen Pr Ground, Firefighter I, AC4HT
Hummer70 is offline  
Old March 9, 2018, 11:51 PM   #2
JoeSixpack
Senior Member
 
Join Date: April 12, 2017
Location: Ohio
Posts: 1,049
Yup.. found this out when was researching grease for AR15 barrel nuts.
I ended up going with Valvoline VV633.. it's not milspec, only about half the moly content, but it's close to aeroshell, sold dirt cheap at just about every autopart store.

I went with a grease gun tube, So im using it for general purpose lubing on other projects as well.

https://www.valvoline.com/our-produc...purpose-grease

EDIT: Oh it's graphite free.
__________________
NRA sold us out
This is America!, You have the right to be stupid.
JoeSixpack is offline  
Old March 10, 2018, 11:39 AM   #3
Ricklin
Senior Member
 
Join Date: February 22, 2008
Location: SW Washington state
Posts: 1,281
Thanks

Thanks for the great document, that one is a keeper.

I'm a big fan of Starcraft boats, I have a restored 1966 18' Holiday that is my forever boat.
It took many years to convince it's owner (my good friend) to sell it to me.

When I lived in SoCal I was in the market for a boat, of course I looked and looked. I could not find a Starcraft that was not "leaky" and ended up buying a fiberglass boat.

The issue? Salt water and the slightly dissimilar materials, hull vs. rivets. Every Starcraft I looked at in SoCal had severe corrosion around the rivets below the waterline.

I have seen Starcraft boats here in the PNW that exhibit the same issue. In fact had a guy that wanted to sell me a 22' Islander. I informed him that the only place that boat should go was the scrapyard. It must have been left in salt water for quite a while.
The rivets are Aluminum, as is the hull. The problem is they are different types of Aluminum.
__________________
ricklin
Freedom is not free
Ricklin is offline  
Old March 10, 2018, 12:05 PM   #4
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 7,269
Thanks for the info

Hummer
Thanks for the heads-up and what an eye-opener it is. I still have some GunSlick, although I don't use it much. I now use Moly-based grease and wondered abut it's properties. I you ever see a report like this, on Moly, please let s know. ....

I use to work in a Moly mine and mill and it's extracted from some very hard rock!!!

Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing.
Pahoo is online now  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06453 seconds with 10 queries