The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old October 12, 2010, 08:13 PM   #3476
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
ThomasH,

Don't feel bad, I get confused with the tables also.
You have to do some interpolating.
On page 399, under J serial prefixes 1971 to 1972, it shows J1 to 999J99. The J1 is a typo, it should read 1J1.
4J would fall between 1J and 999J, which was also known as the floating J years.

On page 400, AWTXXXX would fall between AVB8654 in July 87 to AWW7874 also in July 87.

S&W started the three letter prefix in 1980 and things got real confusing from there because they make allot of special runs with serial numbers out of sequence. To make matters worse, the semi autos use their own serial sequence which jumps all over the place and is not up to date.

Another issue is when S&W makes a frame they stamp the serial number at that time. However, the frame may not be assembled into a gun and shipped for quite some time.

The serial number of my 629 Classic DX dates it to 1997 and yet I have the test target with it dated May 1996 and the original purchase receipt dated Sept. 1996.

The thing to remember is S&W makes guns first. Serial numbers are something that they have to put on them and unfortunantly, they don't assign them for the convenience of collectors.

The book provides a wealth of knowledge on their guns. The serial number tables are really just guides to get you in the range. They charge $50 to research the actual ship date of a gun, which includes other history as well on it.

Jim

Last edited by laytonj1; October 12, 2010 at 08:27 PM.
laytonj1 is offline  
Old October 17, 2010, 03:34 PM   #3477
zgt
Junior Member
 
Join Date: August 1, 2010
Posts: 6
hi ive got an 1982 model 37 can i shoot +p's ?
zgt is offline  
Old October 17, 2010, 03:59 PM   #3478
Walter57
Junior Member
 
Join Date: December 12, 2009
Posts: 3
Serial search S&W 29-6

Just bought a beautiful Smith&Wesson Model 29-6 (.44 magnum - 8" barrel).
Does anyone has more information about this handgun (age, …) or has any experience using it ?
Serial nr.: BPG99XX
Thanks

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
Walter57 is offline  
Old October 17, 2010, 04:00 PM   #3479
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
hi ive got an 1982 model 37 can i shoot +p's ?
If it were a model 36 (steel frame) I would say go for it. The model 37 is an aluminum framed gun. Therefore, IMO, I would limit the amount of +P used in it. Load it with +P for defense and fire a few to check point of impact.

Some folks on the S&W forum have fired 1000's of +P from their 37's with no ill effect but not all +P's are created equal. For example, Buffalo Bore makes a +P that produces low end 357 power levels that I would not fire it in my own 37.

Jim

Last edited by laytonj1; October 17, 2010 at 04:37 PM. Reason: fixed grammer
laytonj1 is offline  
Old October 17, 2010, 04:08 PM   #3480
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Serial nr.: BPG99XX
1993.
One of the better years for model 29's. It was made after all the strength enhancements and prior to the MIM era.

Jim
laytonj1 is offline  
Old October 17, 2010, 04:14 PM   #3481
Walter57
Junior Member
 
Join Date: December 12, 2009
Posts: 3
Quote:
1993.
One of the better years for model 29's. It was made after all the strength enhancements and prior to the MIM era.
Jim
THX Jim for the fast reply !
Walter57 is offline  
Old October 17, 2010, 04:22 PM   #3482
zgt
Junior Member
 
Join Date: August 1, 2010
Posts: 6
thanks for the help man
zgt is offline  
Old October 17, 2010, 10:33 PM   #3483
thekevin
Member
 
Join Date: October 17, 2010
Posts: 28
Hey guys, I am new to the forum and just picked up a 625-8 sn: CFV519XX and was wonder how old it was.
Also I am sure I am ok but there should be no reason I shouldnt use +p in for hunting purposes.
thekevin is offline  
Old October 18, 2010, 01:24 AM   #3484
Miqe
Junior Member
 
Join Date: March 30, 2010
Location: Sweden
Posts: 5
S&W .38, when is it "born"

Hi,

Anyone who could tell me when my "new" S&W is "born")
Serial# K527xxx

Miqe
Miqe is offline  
Old October 18, 2010, 07:57 AM   #3485
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,727
thekevin: I think you've got an extra "X" in that serial number - assuming that to be the case, the CFV prefix corresponds to 2003. As a -8, your 625 should be chambered for .45 ACP, in which case any +p ammo should be fine (not sure that it's a good cartridge for what you're planning to hunt, however).

SCSW notes that there's a bit of confusion regarding which calibers certain 625 variations are chambered for, so it's possible (I think) that you have a .45 Colt, in which case the +p story gets a bit more complicated. To the best of my knowledge, unlike many cartridges, there is no SAAMI pressure standard for .45 Colt +p. That gives manufacturers carte blanche to do pretty much whatever they or their lawyers think they can get away with. I have no doubt that a 625 can handle some .45 Colt +p loads, and similarly have no doubt that some of them (thinking here of the Cor-Bon so-called .45 Colt "Magnum" loads intended for Rugers and the like) would be risky. If it were my gun, I wouldn't do it - but I tend to be conservative when it comes to the potential for losing body parts.

Mige: 1963
FlyFish is offline  
Old October 18, 2010, 08:24 AM   #3486
Miqe
Junior Member
 
Join Date: March 30, 2010
Location: Sweden
Posts: 5
Thank You FlyFish
Compliments from Sweden!

Does anyone know if there is a similar forum for Colt revolvers
Miqe is offline  
Old October 18, 2010, 08:29 AM   #3487
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,727
Hi Mige - I failed to notice where you were posting from when I replied originally. Welcome to the forum. What model S&W do you have? Could you tell us a little bit about gun laws in Sweden and the hoops (I assume) you need to jump through to own a handgun?

ETA:

Colt Forum is here: http://coltforum.com/

S&W Forum here: http://smith-wessonforum.com/

SIG Forum: http://www.sigforum.com/

I think with a bit of Googling you could likely find a dedicated forum for just about any major firearms manufacturer.
FlyFish is offline  
Old October 18, 2010, 10:53 AM   #3488
thekevin
Member
 
Join Date: October 17, 2010
Posts: 28
Mine is .45acp, I am itching to kill a deer with it this year is the reason I am looking at the cor bon +p rounds, I will double check my serial at lunch today.
thekevin is offline  
Old October 18, 2010, 05:31 PM   #3489
thekevin
Member
 
Join Date: October 17, 2010
Posts: 28
Yes, I did put an extra X in the serial, thanks for all the other information.
thekevin is offline  
Old October 18, 2010, 06:55 PM   #3490
gallowaystx
Junior Member
 
Join Date: October 18, 2010
Posts: 2
Hello gentlemen - I just bought my first firearm and it's a model 60 pin barrel 38. I was wondering if you would be kind enough to date it for me as i can't justify buying the book for my one and only pistol.

the serial number is R - 3XXX (only 4 digits) S&W Model 60
gallowaystx is offline  
Old October 18, 2010, 08:32 PM   #3491
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,727
The "R" prefix is one of the more uncommon on S&W revolvers - it was used only for the Models 60 and 651 (doesn't add anything to the value, just a point of interest). Your R3XXX number indicates the gun dates from 1969, the first year the R prefix was used. The range that year was from R1 to R3000.
FlyFish is offline  
Old October 18, 2010, 10:02 PM   #3492
ashcan
Junior Member
 
Join Date: October 18, 2010
Posts: 1
who do i find out how old my gun is

ihave a gun with serial number 6k50xxx and I dont know what year it was made
ashcan is offline  
Old October 18, 2010, 10:43 PM   #3493
Ignacio49
Senior Member
 
Join Date: September 17, 2002
Posts: 221
Hi Jim.
This one belongs to a good friend of mine.

Mod 36 3" barrel, nickel, round butt.

S/N J2337xx. DOB?

Appreciate your help.
Ignacio49 is offline  
Old October 19, 2010, 12:31 AM   #3494
Miqe
Junior Member
 
Join Date: March 30, 2010
Location: Sweden
Posts: 5
Hi FlyFish,
and Thank You!

I got one .22 (M17) and one .38 (M14) S&W revolver. Both have 6" barrels.

In Sweden You have to join a shooting club and take a "class" (10x 3 hours).
Lots of shooting, reading laws and most important - SAFETY, SAFETY!
The education is like the green card for golf. That´s the first step, then You have to be a "active" member for at least 6 months to get Your first license (for .22 caliber gun). If You are approved by the Police of course. You should not have any record at the Police for violence etc. After 6 more months You can file for the larger caliber guns. That is if You can proove that You are active in the club helping at contests, help cleaning the club houses and that You join shooting contests and practice hours. It´s the board of the shooting club who approves and send information to the police.

Sooooo, it´s a long way to get a gun in Sweden - not so easy as in US.
I just got my license for .32 Hämmerli pistol, 9mm. CZ pistol, .38 3" Colt revolver and a .38 6" S&W revolver (I got a .22 Pardini pistol and a S&W .22 6" revolver since April this year). I joined my club a year ago, so now I can practice "for real"
My club has several guns in different calibers that members could borrow, but just at practice hours. You are not supposed to have guns or ammo at home when You don´t have any license. You can´t even have ammo like .38 at home when You don´t have a license for a .38 gun (silly).
It´s not the same to borrow a gun then to have Your own

Last edited by Miqe; October 19, 2010 at 01:01 AM.
Miqe is offline  
Old October 19, 2010, 01:16 AM   #3495
gallowaystx
Junior Member
 
Join Date: October 18, 2010
Posts: 2
Thanks so much flyfish - I appreciate that very much. I suspect I overpayed ($450) for the gun but I love it and preferred it to the newer airlights that were only slightly more expensive, it feels heftier.

If I understand correctly then the gun is a 1970 model because the serial is higher than 3000?
gallowaystx is offline  
Old October 19, 2010, 06:43 AM   #3496
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,727
Sorry, I misposted the number of zeroes in the SN range. 1969 would be correct; the ending SN that year was R30000 (R plus 5 numerical digits). As yours has only 4 numbers following the R, it would be 1969. Assuming the gun is in nice shape, you wouldn't have overpayed much, if at all, in this neck of the woods - prices for good used S&W revolvers are going through the roof.
FlyFish is offline  
Old October 19, 2010, 06:45 AM   #3497
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,727
Ignacio49: 1974

ashcan: 1974 on yours as well.
FlyFish is offline  
Old October 19, 2010, 06:58 AM   #3498
Ignacio49
Senior Member
 
Join Date: September 17, 2002
Posts: 221
Thank you FlyFish.

Regards from Venezuela.
Ignacio49 is offline  
Old October 19, 2010, 01:08 PM   #3499
memememe
Junior Member
 
Join Date: October 19, 2010
Posts: 2
HI all new to the forum!
I have a S&W 38 4" barrel serial number c881xxx
Was wandering if anyone could tell me when it was made,model and anything else about it.
Thanks.
memememe is offline  
Old October 19, 2010, 04:52 PM   #3500
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I have a S&W 38 4" barrel serial number c881xxx
Serial numbers ran from C810533 in 1966 to C999999 in 1967.
If it has a steel frame it is a model 10, an aluminum frame would be a model 12.

Jim
laytonj1 is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.45580 seconds with 9 queries