The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old February 18, 2009, 12:25 AM   #1051
OttoJara
Senior Member
 
Join Date: November 14, 2008
Location: Palm Beach County, Florida
Posts: 459
[QUOTE][/Hmmm, the SN puts it at 1974/75 but, the SCSW shows the -2's didn't start till 1977.
QUOTE]

The gun was purchased from an old Smith employee that was somesort of Rep./ Training person for LE. maybe it was a trial to see if there was a market for a 6shot snubby.

Thanks so much for the info.
OttoJara is offline  
Old February 19, 2009, 08:40 AM   #1052
charleym3
Senior Member
 
Join Date: December 14, 2001
Location: Central NC
Posts: 538
my tyrn now?

Let's see if I can do this right first time.
Model is a blue 10-7. 4 inch thin barrel. SN 4D49700.
The finish is horrible and there are many dings, but the mechanics are as good as they can be. Rock solid lock up, excellent accuracy and shoots to POA with factory equivalent 158gr TC slugs.

Last edited by charleym3; February 19, 2009 at 02:25 PM. Reason: correcting acronym mistake.
charleym3 is offline  
Old February 19, 2009, 12:52 PM   #1053
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Model is a blue 10-7. 4 inch thin barrel. SN 4D49700.
1979.

Jim
laytonj1 is offline  
Old February 19, 2009, 02:23 PM   #1054
charleym3
Senior Member
 
Join Date: December 14, 2001
Location: Central NC
Posts: 538
Thank you Jim.
charleym3 is offline  
Old February 19, 2009, 08:59 PM   #1055
Officer's Match
Senior Member
 
Join Date: January 16, 2007
Location: LANCASTER,OHIO
Posts: 3,944
OK folks, I'm looking at a blued, 8 3/8" (or there about), 27-1.
The number I see is S 220xxx
__________________
REAL EYES
REALIZE
REAL LIES
Officer's Match is offline  
Old February 19, 2009, 10:51 PM   #1056
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
OK folks, I'm looking at a blued, 8 3/8" (or there about), 27-1.
The number I see is S 220xxx
1961 and -1's are scarce and worth a premium.

Jim
laytonj1 is offline  
Old February 19, 2009, 11:19 PM   #1057
Officer's Match
Senior Member
 
Join Date: January 16, 2007
Location: LANCASTER,OHIO
Posts: 3,944
Quote:
1961 and -1's are scarce and worth a premium.

Jim
Thanks Jim. I think I'll buy her tomorrow. Condition is very, very good. The checkering on the hammer spur is still very crisp and sharp. Grips appear original. Checkering on top of revolver is also in very good shape. Finish is probably a solid 96-97%. Based upon what limited info you have here, would you think $550 - $600 range is reasonable?
__________________
REAL EYES
REALIZE
REAL LIES
Officer's Match is offline  
Old February 19, 2009, 11:43 PM   #1058
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Based upon what limited info you have here, would you think $550 - $600 range is reasonable?
Yes!

Jim
laytonj1 is offline  
Old February 20, 2009, 01:12 PM   #1059
tjm
Junior Member
 
Join Date: December 23, 2008
Posts: 4
A friend has a 5 shot .38 special revolver, looks a bit old, says 'Airweight' on the barrel (about 3.5"), and is marked 'Mod-37'. It's serial number 604xxx. Can anyone tell me the age of this one?
tjm is offline  
Old February 20, 2009, 05:32 PM   #1060
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
A friend has a 5 shot .38 special revolver, looks a bit old, says 'Airweight' on the barrel (about 3.5"), and is marked 'Mod-37'. It's serial number 604xxx. Can anyone tell me the age of this one?
Serial numbers ran from 295000 in 1962 to 786544 in 1969.

Jim
laytonj1 is offline  
Old February 20, 2009, 05:40 PM   #1061
redstategunnut
Senior Member
 
Join Date: February 14, 2009
Location: see name
Posts: 405
Model 28-2

Serial #N53913
Any help?
redstategunnut is offline  
Old February 20, 2009, 05:59 PM   #1062
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Serial #N53913
~1971/72.

Jim
laytonj1 is offline  
Old February 20, 2009, 06:45 PM   #1063
senior
Member In Memoriam
 
Join Date: May 2, 2005
Posts: 334
date s-w

have a s-w 640-1 with s # ccu6xxx, anyone give me a rough estimate of manufacture date? Thanks
senior is offline  
Old February 20, 2009, 07:19 PM   #1064
lsutiger76
Junior Member
 
Join Date: February 19, 2009
Location: Cookville, Tennessee
Posts: 4
Need some help on date and est value

Just aquired a S&W, model 64, serial # AUA8594. Can anyone help me determine its date of birth and approximate value. Good conditon - some scratches on finish. Thank you.
lsutiger76 is offline  
Old February 20, 2009, 09:48 PM   #1065
Bang!
Junior Member
 
Join Date: February 11, 2009
Location: Tennessee
Posts: 9
S&w 629-2

One of my favorite pistols is a S&W model 629-2 44mag, serial # BBF 4xxx It is stainless with a 6" bbl and non-fluted cylinder. I've had it for about 5 years and the guy I bought it from had no idea of the mftr. date. Any input would be greatly appreciated!
Bang! is offline  
Old February 20, 2009, 10:29 PM   #1066
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
have A S-w 640-1 With S # Ccu6xxx, Anyone Give Me A Rough Estimate Of Manufacture Date?
1997/98.

Quote:
just Aquired A S&w, Model 64, Serial # Aua8594. Can Anyone Help Me Determine Its Date Of Birth And Approximate Value.
1986/87. ~$350.

Quote:
one Of My Favorite Pistols Is A S&w Model 629-2 44mag, Serial # Bbf 4xxx It Is Stainless With A 6" Bbl And Non-fluted Cylinder. I've Had It For About 5 Years And The Guy I Bought It From Had No Idea Of The Mftr. Date.
1988
laytonj1 is offline  
Old February 20, 2009, 11:03 PM   #1067
Bang!
Junior Member
 
Join Date: February 11, 2009
Location: Tennessee
Posts: 9
Thank you kindly sir!
Bang! is offline  
Old February 21, 2009, 11:21 AM   #1068
lsutiger76
Junior Member
 
Join Date: February 19, 2009
Location: Cookville, Tennessee
Posts: 4
Thank you - much appreciated.
lsutiger76 is offline  
Old February 21, 2009, 11:34 AM   #1069
WarOzz
Junior Member
 
Join Date: February 21, 2009
Location: Klamath Falls, Oregon
Posts: 1
Need help identifying and valueing revolver

Hello everyone,

New to the forum and need some help. I am looking to purchase a .38 from a private party and in so doing I need to know the model and approximate value. Any help would be appreciated!

The revolver is stainless with black grips, the overall length is approximately 6 1/4"

Markings include

Left side of barrel:
Smith & Wesson
.38 S & W SPL.+P

Right side of frame:
Airweight
SPFLD, MA
S&W U.S.A

Buttplate: (I assume this is the serial number?)
CHZ6473

Thanks in advance!
WarOzz is offline  
Old February 21, 2009, 08:03 PM   #1070
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
New to the forum and need some help. I am looking to purchase a .38 from a private party and in so doing I need to know the model and approximate value. Any help would be appreciated!
The revolver is stainless with black grips, the overall length is approximately 6 1/4"
Markings include
Left side of barrel:
Smith & Wesson
.38 S & W SPL.+P
Right side of frame:
Airweight
SPFLD, MA
S&W U.S.A
Buttplate: (I assume this is the serial number?)
CHZ6473
Serial number puts it in 2004. Your description leaves 3 possibles I know of, Models 637, 638, or 642. All sale for about $600 new and about $450 used.

Jim
laytonj1 is offline  
Old February 22, 2009, 10:36 PM   #1071
DMSmall
Junior Member
 
Join Date: February 22, 2009
Posts: 1
New old gun

I just bought a S&W 357 model 586 Nickel plated as it has a letter N stamped in the cylinder. ( And the SS was called 686) Could you help me with the year for this gun? The serial is ADN29XX.( no dash) The Cylinder also has a set of numbers 311xx and the C5 stamped on it. Any ideas about this mark?
I appreciate any assistance. Many thanks in advance.
DMSmall is offline  
Old February 23, 2009, 01:01 AM   #1072
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I just bought a S&W 357 model 586 Nickel plated as it has a letter N stamped in the cylinder. ( And the SS was called 686) Could you help me with the year for this gun? The serial is ADN29XX.( no dash) The Cylinder also has a set of numbers 311xx and the C5 stamped on it. Any ideas about this mark?
1983. I think the letter N on the cylinder is for Nickel. The other numbers are factory assembly numbers.

Jim
laytonj1 is offline  
Old February 24, 2009, 10:07 AM   #1073
Albert21
Junior Member
 
Join Date: February 24, 2009
Posts: 2
Dazed and Confused (situation Normal)

I purchased this S&W several years ago. I used to carry it in my business. I'd like to know the model and any other info on the weapon. It's a short barrel. stainless steel, small frame with S&W .357 MAGNUM on the right side of barrel and SMITH & WESSON on the left side. Serial number is AER 81**. Is it a J frame? Barrel length is about 2"

Last edited by Albert21; February 24, 2009 at 10:08 AM. Reason: spelling
Albert21 is offline  
Old February 24, 2009, 12:13 PM   #1074
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I'd like to know the model and any other info on the weapon. It's a short barrel. stainless steel, small frame with S&W .357 MAGNUM on the right side of barrel and SMITH & WESSON on the left side. Serial number is AER 81**. Is it a J frame? Barrel length is about 2"
The SN dates it to 1984. Since S&W didn't make J frame 357's in 1984 yours must be a K frame. The model number is stamped on the frame forward of the cylinder. You have to open the cylinder to see it.

Jim

The one in this pic is a 629-1.
laytonj1 is offline  
Old February 24, 2009, 03:10 PM   #1075
cody4109
Junior Member
 
Join Date: February 24, 2009
Posts: 4
Can anyone identify the year of manufacture or sale of a Smith and Wesson model 60. The number on the butt is R710XX. Its a 38 Spl chiefs in ss. The revolver is a five shot and looks in excellent condition. My friend is asking $300 and wonder if that is reasonable thanks
cody4109 is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.49167 seconds with 9 queries