Hi-power trigger: Trick for reassembly?

MuzzleBlast · November 23, 2021, 03:08 PM

Is there a trick for getting the trigger lever back in place properly?

Scorch · November 23, 2021, 03:26 PM

No, no trick. It's simple.

MuzzleBlast · November 23, 2021, 03:28 PM

Quote:

Originally Posted by Scorch

No, no trick. It's simple.

If it was simple, why would I be asking if there was a trick?

Roughedge · November 24, 2021, 04:05 PM

Try a You tube video, I think there are several

Sharkbite · November 24, 2021, 05:56 PM

I just used a youtube vid to guide me thru dis-assembly of my Springfield SA35. Had the frame cerecoted in a gray. I took the sharp edges off the frame so the finish needed redone.

Not as easy as a 1911, but not too hard

November 23, 2021, 03:08 PM	#1
MuzzleBlast Senior Member Join Date: September 11, 2001 Location: Arkansas. Much better place since Bill and Hillary went home. Posts: 1,041	Hi-power trigger: Trick for reassembly? Is there a trick for getting the trigger lever back in place properly? __________________ Molwn labe!

November 23, 2021, 03:26 PM	#2
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	No, no trick. It's simple. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

November 24, 2021, 04:05 PM	#4
Roughedge Senior Member Join Date: January 24, 2011 Location: Monroe,NC Posts: 669	Try a You tube video, I think there are several __________________ The man that die's with the most stuff win's!

November 24, 2021, 05:56 PM	#5
Sharkbite Senior Member Join Date: November 4, 2013 Location: Western slope of Colorado Posts: 3,679	I just used a youtube vid to guide me thru dis-assembly of my Springfield SA35. Had the frame cerecoted in a gray. I took the sharp edges off the frame so the finish needed redone. Not as easy as a 1911, but not too hard