The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old December 3, 2009, 11:35 PM   #1
onegun
Junior Member
 
Join Date: July 4, 2009
Posts: 10
OAL for .308 in a Rem VTR using MK 168gr

Using a Hornady OAL guage w/ modified .308 case to find seating depth for a match king 168gr hpbt in my Remington 700 VTR in .308 cal. I get 2.99" when I use calipers to measure OAL. Too far out for the neck to even hold the bullet and well over 2.81 SAAMI max and Sierra manual for this bullet of 2.80
Clearly I cannot use this information to seat bullets.
I would like to hear comments on this situation and what the next move should be.
Thanks,
Onegun
onegun is offline  
Old December 3, 2009, 11:42 PM   #2
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 15,569
Seems to be Remington policy these days.
I'd seat them as long as the magazine would take.
Jim Watson is offline  
Old December 4, 2009, 12:00 AM   #3
Ridgerunner665
Senior Member
 
Join Date: June 22, 2007
Location: Upper East Tennessee
Posts: 449
Remingtons have always been throated REALLY, REALLY long...always. (all calibers, all models)

2.82"- 2.83" is about as long as you can fit in the magazine.

You can load them longer...but you will have to feed them by hand. (around 2.90"...but be sure to check for yourself that this is not touching the lands...it won't be, but its best to be sure.
Ridgerunner665 is offline  
Old December 4, 2009, 01:51 AM   #4
onegun
Junior Member
 
Join Date: July 4, 2009
Posts: 10
OK Interesting, thanks for the info.
onegun is offline  
Old December 5, 2009, 05:44 PM   #5
gearheadpyro
Senior Member
 
Join Date: September 3, 2009
Location: Charleston, SC
Posts: 169
I have the same issue with my remmy, as do most handloaders with remmy's. C.O.L. with 175gr Matchkings is around 2.960"
__________________
www.southernmarksman.com
Owner of & Chief Instructor for The Southern Marksman, LLC
NRA Life Member, NRA CRSO, Multi-Discipline NRA Certified Instructor
gearheadpyro is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.04724 seconds with 10 queries