|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
May 17, 2017, 12:46 AM | #1 |
Junior Member
Join Date: May 16, 2017
Posts: 2
|
New Frontier Arms poly lower
Hey guys,
I just wanted to post a quick video I put together showing my experience with the Nfa polymer lower and how it worked out for me. I wouldn't recommend this product but for what it was at the time that I bought it I guess I got my money's worth out of it. What are yalls thoughts on the polymer lowers? https://youtu.be/AGS7CXj_j0g |
May 17, 2017, 12:47 PM | #2 |
Senior Member
Join Date: February 20, 2000
Location: Colombia, SC
Posts: 745
|
I have 2 of them, bought them years ago for $89 each, shipped. Don't shoot them too much, but so far they work fine.
Friend of mine used to shoot highpower competitions with a polymer lower (not New Frontier, some company before them) just to see if he could break it, he did not succeed.
__________________
I don't have time for busy people |
May 17, 2017, 06:16 PM | #3 |
Senior Member
Join Date: March 16, 2011
Posts: 489
|
I used to live near them in Vegas and bought one when they first came out years ago. It's currently the lower on my wife's AF and so far so good. Then again, she isn't going out shooting hundreds of rounds with it. I also bought a polymer lower from Tennessee Arms, which uses a brass insert for the buffer tube to screw into. I'm liking those a lot more. Plus they're about 1/3 the price.
Overall, I have nothing against polymer lowers. Benefits for polymer are: lighter, cheaper and no corrosion. They may not have the same tight tolerances as metal lowers, but I'm not making $1000+ ARs for precision shooting. My TN Arms lower was used on my 300 Blackout AR pistol. It's my truck gun, so I'm not too concerned about beating it around a lil bit. |
May 17, 2017, 07:42 PM | #4 |
Senior Member
Join Date: May 15, 2017
Location: Iowa
Posts: 1,095
|
I have one, can't recall the name, that was made in Arizona. The company changed their name because BATF didn't like the way they attached the serial numbers. It works great as a 5.56 carbine.
I have another from FMK Firearms, a 300 Blackout pistol. I tried three different trigger groups in it, but couldn't stop it from shooting 2 or 3 round bursts. The pin holes must have been slightly off. I put in a Chip Mc Cormick modular unit and that solved the problem. |
May 17, 2017, 09:31 PM | #5 |
Junior Member
Join Date: May 16, 2017
Posts: 2
|
I agree with everything said. I have no problems with the poly lowers and 7+ years ago when I bought it the price differential was worth taking the risk. Nowadays that you can get aluminum lowers for a similar price I wouldn't spend the cash on a polymer.
It's obvious that the polymer isn't as strong as the aluminum lowers but I don't think it's a bad choice if the gun doesn't see much abuse. |
Thread Tools | Search this Thread |
|
|