Stainless Steel Uberti Percussion Colt's

Fingers McGee · June 30, 2019, 12:00 PM

Stainless Steel Percussion Colts

In the early to mid 1980s, Uberti produced a line of stainless steel percussion Colt revolvers that were imported to the US by Allen Firearms, Santa Fe, NM; Southwest Muzzleloaders Supply, Inc. Angleton, TX, Uberti USA, and possibly others. They are now also known to have been sold in Europe under the HEGE dealer name.

Phil Spangenberger did an article about these stainless revolvers in the October 1983 issue of Guns and Ammo Magazine. According to the article, the models that were being imported were the 1851 Navy, 1860 Army, 1861 Navy, 1862 Pocket Navy, and 1862 Pocket police. Thanks to Dr. J.L. Davis of RPRCA, Claremore, OK, I have a 1984 price list for Uberti products that lists fourteen different models of Stainless Steel Colts produced by Uberti at that time. Subsequent price lists expanded the line to 16 models by adding 4 ½ inch barreled Pocket Navy and Pocket Police. The known model list is:

1851 Navy, Oval Trigger guard Revolver, Cal. .36
1851 Navy, Square back Trigger guard Revolver, Cal. .36 *@
1851 Navy, “Sheriff’s Model” Oval Trigger guard Revolver, Cal. .36 *
1851 Navy, “Sheriff’s Model” Square back Trigger guard Revolver, Cal. .36
1860 Army, Military, Cut For Stock, Cal. .44 *@
1860 Army, Military, With Fluted Cylinder, Revolver, Cal. .44*@
1861 Navy, Military, Cut For Stock, Revolver, Cal. .36 * @
1861 Navy, Civilian, Revolver, Cal. .36
1861 Navy, Military, With Fluted Cylinder, Revolver, Cal. .36*
1861 Navy, Civilian, With Fluted Cylinder, Revolver, Cal. .36
1862 Police, Semi-Fluted Cylinder, Revolver, Cal. .36, Barrel 4 ½”@
1862 Police, Semi-Fluted Cylinder, Revolver, Cal. .36, Barrel 5 ½”*@
1862 Police, Semi-Fluted Cylinder, Revolver, Cal. .36, Barrel 6 ½”
1862 Pocket Navy, Engraved Cylinder, Revolver, Cal. .36, Barrel 4 ½”*
1862 Pocket Navy, Engraved Cylinder, Revolver, Cal. .36, Barrel 5 ½”*@
1862 Pocket Navy, Engraved Cylinder, Revolver, Cal. .36, Barrel 6 ½”
(* - have identified location of examples of these models)
(@ - have this model)

The current total of known revolvers is thirty five. I have nine of these revolvers and know of twenty six in the hands of other collectors or BP shooters. Two of the known revolvers are in Switzerland, one is in England, one in Spain, one in Poland and an 1861 Navy sold on GunBroker in Feb ‘19. The Swiss and Polish models are marked Original Hege on the barrel, the English model has the typical Allen Firearms barrel address, and the one in Spain has a blank barrel. Markings for the one sold in Feb are unknown. Seller wouldn't respond to inquiries.

Anyone with information concerning Allen Firearms, Southwest Muzzleloaders Supply or any other Uberti Stainless Steel Colt style revolvers is requested to contact [email protected] I am seeking information as to models, manufacture dates, serial numbers, barrel markings, barrel lengths, trigger guards, and any other characteristics as well as catalog, brochure, and original packaging information.

Of course, if anyone has any for sale, I

Fingers McGee · July 24, 2019, 01:33 PM

Total is now 36 known, one sold on the Colt Forum this month.

Here is a picture of my 9

the possum · July 25, 2019, 11:22 PM

Doesn't Uberti have a record of how many they made? It wasn't that long ago.

Fingers McGee · July 26, 2019, 11:27 AM

Uberti was bought by Stoeger, the records are unobtainable. I've tried.

June 30, 2019, 12:00 PM	#1
Fingers McGee Senior Member Join Date: March 19, 2008 Location: High & Dry in Missouri Ozarks Posts: 2,113	Stainless Steel Uberti Percussion Colt's Stainless Steel Percussion Colts In the early to mid 1980s, Uberti produced a line of stainless steel percussion Colt revolvers that were imported to the US by Allen Firearms, Santa Fe, NM; Southwest Muzzleloaders Supply, Inc. Angleton, TX, Uberti USA, and possibly others. They are now also known to have been sold in Europe under the HEGE dealer name. Phil Spangenberger did an article about these stainless revolvers in the October 1983 issue of Guns and Ammo Magazine. According to the article, the models that were being imported were the 1851 Navy, 1860 Army, 1861 Navy, 1862 Pocket Navy, and 1862 Pocket police. Thanks to Dr. J.L. Davis of RPRCA, Claremore, OK, I have a 1984 price list for Uberti products that lists fourteen different models of Stainless Steel Colts produced by Uberti at that time. Subsequent price lists expanded the line to 16 models by adding 4 ½ inch barreled Pocket Navy and Pocket Police. The known model list is: 1851 Navy, Oval Trigger guard Revolver, Cal. .36 1851 Navy, Square back Trigger guard Revolver, Cal. .36 @ 1851 Navy, “Sheriff’s Model” Oval Trigger guard Revolver, Cal. .36 1851 Navy, “Sheriff’s Model” Square back Trigger guard Revolver, Cal. .36 1860 Army, Military, Cut For Stock, Cal. .44 @ 1860 Army, Military, With Fluted Cylinder, Revolver, Cal. .44@ 1861 Navy, Military, Cut For Stock, Revolver, Cal. .36 * @ 1861 Navy, Civilian, Revolver, Cal. .36 1861 Navy, Military, With Fluted Cylinder, Revolver, Cal. .36* 1861 Navy, Civilian, With Fluted Cylinder, Revolver, Cal. .36 1862 Police, Semi-Fluted Cylinder, Revolver, Cal. .36, Barrel 4 ½”@ 1862 Police, Semi-Fluted Cylinder, Revolver, Cal. .36, Barrel 5 ½”@ 1862 Police, Semi-Fluted Cylinder, Revolver, Cal. .36, Barrel 6 ½” 1862 Pocket Navy, Engraved Cylinder, Revolver, Cal. .36, Barrel 4 ½” 1862 Pocket Navy, Engraved Cylinder, Revolver, Cal. .36, Barrel 5 ½”@ 1862 Pocket Navy, Engraved Cylinder, Revolver, Cal. .36, Barrel 6 ½” ( - have identified location of examples of these models) (@ - have this model) The current total of known revolvers is thirty five. I have nine of these revolvers and know of twenty six in the hands of other collectors or BP shooters. Two of the known revolvers are in Switzerland, one is in England, one in Spain, one in Poland and an 1861 Navy sold on GunBroker in Feb ‘19. The Swiss and Polish models are marked Original Hege on the barrel, the English model has the typical Allen Firearms barrel address, and the one in Spain has a blank barrel. Markings for the one sold in Feb are unknown. Seller wouldn't respond to inquiries. Anyone with information concerning Allen Firearms, Southwest Muzzleloaders Supply or any other Uberti Stainless Steel Colt style revolvers is requested to contact [email protected] I am seeking information as to models, manufacture dates, serial numbers, barrel markings, barrel lengths, trigger guards, and any other characteristics as well as catalog, brochure, and original packaging information. Of course, if anyone has any for sale, I __________________ Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce

July 26, 2019, 11:27 AM	#4
Fingers McGee Senior Member Join Date: March 19, 2008 Location: High & Dry in Missouri Ozarks Posts: 2,113	Uberti was bought by Stoeger, the records are unobtainable. I've tried. __________________ Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce

July 25, 2019, 11:22 PM	#3
the possum Senior Member Join Date: November 6, 2004 Location: Southern Illinois Posts: 555	Doesn't Uberti have a record of how many they made? It wasn't that long ago.