May 29, 2011, 10:50 AM | #1 |
Junior Member
Join Date: May 29, 2011
Posts: 2
|
Smith & Wesson 1880?
My father bought this Smith & Wesson in Yemen over 30 years ago. That is why the handle is plastic and has an arab inscription. It is a single-action, cartridge-firing, 5 shot top-break revolver with automatic cartridge ejection. Serial number 24015, the cylinder has number 04921. The last date on the barrel is difficult to read: probably May 11th 1880, as the prior date reads July 25th 1871.
Can you help identify the model? |
May 29, 2011, 11:23 AM | #2 |
Senior Member
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,652
|
This will be a S&W 38 Single Action 2nd Model, built in 1876 or 1877. HTH.
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936. |
May 29, 2011, 11:56 AM | #3 |
Senior Member
Join Date: November 2, 2005
Location: Arizona
Posts: 1,936
|
???? The grip ( handle ) looks to be a standard S&W grip with a standard S&W logo, am I missing something???
|
May 29, 2011, 06:18 PM | #4 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
New one on me! I have never heard the intertwined S&W logo described as being an "arab" marking.
Actually, those were pretty good guns and most I see around are in working condition, unlike other guns of that era. Jim |
May 30, 2011, 07:11 AM | #5 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
The grips aren't plastic, they're hard rubber. If you decide to take them off the gun, be VERY careful as they get VERY brittle with age.
And definitely standard S&W logo grips, not Arabic.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
May 30, 2011, 02:32 PM | #6 |
Junior Member
Join Date: May 29, 2011
Posts: 2
|
Thanks and sorry
Thank you for your help in identifying my gun. As you noticed, I'm very much new to this. Sorry about the "arab" reference.
It still works fine, but I haven't fired it yet. Unsure if I should dare do so. |
May 30, 2011, 06:00 PM | #7 |
Senior Member
Join Date: November 2, 2005
Location: Arizona
Posts: 1,936
|
Don't worry about it, you just messed up my fuzzy little head with the grip comment welcome aboard.
|
May 30, 2011, 08:29 PM | #8 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Those guns are fine with modern .38 S&W ammo, if you can find any. Some folks will say to use only black powder, but I fired almost a box of new ammo out of one of those and out of a Baby Russian a month or so ago. Horrible sights, but otherwise no problems.
Jim |
May 30, 2011, 09:27 PM | #9 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
The big problem with blackpowder frame S&W guns and modern smokeless ammo isn't a catastrophic failure of the gun.
It's the fact that smokeless powder can stretch the ductile iron that was used in the frames of a lot of the black powder era guns. Smokeless powder has a significantly different pressure curve, one that's just not compatible with the ductile iron frames.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
Tags |
s&w |
|
|