Magguts for the Kahr 9 and 40

HighValleyRanch · March 5, 2019, 02:46 PM

Just found out that Magguts is very close to releasing their magazine +1 kits for the Kahr 9 series of pistols. I emailed them and said that the .40 is close to follow.
That means that with the flush magazine in the PM9, you would get 7+1 and in the P9 or CW9 series, 8+1 with the flush magazines.

https://magguts.com/product/kahr-9mm...ound-magazine/

Stubert · March 11, 2019, 10:42 AM

I have the mag guts in my S&W Bodyguard. Flawless functioning, and the slide locks back now 100% of the time.

Charlie98 · March 11, 2019, 07:48 PM

Jeepers... what sorcery is this??? There isn't much room in a CW9 mag... let alone in a CM9 mag... for another round.

HighValleyRanch · March 11, 2019, 08:08 PM

If it's anything like the shield, they use a thinner metal follower and a flat spring that compresses more but still retains tension for all the rounds to give that extra space for one more round. My shield version work flawlessly.

JERRYS. · March 11, 2019, 08:10 PM

the G43 and G42 enjoyed the magguts design for several years now.

Tactical Jackalope · March 12, 2019, 09:28 AM

And here I was, about to sell my Kahr K9.

Many manufacturers make these for Glocks, Jerry. Taran Tactical and Hyve. But I did not know Magguts have been making them for Glocks all this time!

Also, I am still selling the Kahr K9. Head to TFL gun show for any inquiries.

HighValleyRanch · March 12, 2019, 10:24 AM

Quote:

Many manufacturers make these for Glocks, Jerry. Taran Tactical and Hyve.

These companies make "extensions" for added capacity, but I believe Magguts is the only one that you can add capacity with the same length magazine.

Tactical Jackalope · March 12, 2019, 10:26 AM

Whoa! Wait a second. You're adding rounds with a flush magazine? That's some witchcraft right there.

Carmady · March 12, 2019, 07:06 PM

I have the MagGuts in my Gen 2 LCP, only fired three mags through it, but there were zero malfunctions. That makes the LCP 7+1 with a flat /flush floorplate.

I'm also waiting for the Kahr 6-to-7 round 9mm MagGuts. I have an extra Wolff # 79301 mag spring and it's a little over twice as long as the 6-rd mag.

Carmady · January 19, 2020, 02:37 PM

Just found this, MagGuts +1 kits for Kahr 6 and 7 round mags.

https://www.youtube.com/watch?v=slw2s7WiU20

Edit:
MagGuts page for Kahr 9mm 6+1 and 7+1 kits.

https://magguts.com/product-category/kahr/

Carl the Floor Walker · January 19, 2020, 06:35 PM

I have them in my Kahr CW380 and function flawlessly. I also have the Gallaway Plus 1 for many of my Kahr CM9 and function great. I like the metal follower of the Magguts.

Dan-O · January 20, 2020, 12:12 AM

Magguts are on order

March 5, 2019, 02:46 PM	#1
HighValleyRanch Senior Member Join Date: July 15, 2005 Posts: 4,066	Magguts for the Kahr 9 and 40 Just found out that Magguts is very close to releasing their magazine +1 kits for the Kahr 9 series of pistols. I emailed them and said that the .40 is close to follow. That means that with the flush magazine in the PM9, you would get 7+1 and in the P9 or CW9 series, 8+1 with the flush magazines. https://magguts.com/product/kahr-9mm...ound-magazine/ __________________ From the sweet grass to the slaughter house; From birth until death; We travel between these two eternities........from 'Broken Trail"

March 11, 2019, 07:48 PM	#3
Charlie98 Senior Member Join Date: September 6, 2006 Location: Great state of Texas Posts: 1,077	Jeepers... what sorcery is this??? There isn't much room in a CW9 mag... let alone in a CM9 mag... for another round. __________________ _______________ "I have this pistol pointed at your heart!" "That is my least vulnerable spot."

March 11, 2019, 08:08 PM	#4
HighValleyRanch Senior Member Join Date: July 15, 2005 Posts: 4,066	If it's anything like the shield, they use a thinner metal follower and a flat spring that compresses more but still retains tension for all the rounds to give that extra space for one more round. My shield version work flawlessly. __________________ From the sweet grass to the slaughter house; From birth until death; We travel between these two eternities........from 'Broken Trail"

January 19, 2020, 02:37 PM	#10
Carmady Senior Member Join Date: February 26, 2013 Location: on the lam Posts: 1,735	Just found this, MagGuts +1 kits for Kahr 6 and 7 round mags. https://www.youtube.com/watch?v=slw2s7WiU20 Edit: MagGuts page for Kahr 9mm 6+1 and 7+1 kits. https://magguts.com/product-category/kahr/ Last edited by Carmady; January 19, 2020 at 03:22 PM.

March 11, 2019, 10:42 AM	#2
Stubert Member Join Date: February 6, 2018 Location: Catskill Mtns. New York Posts: 19	I have the mag guts in my S&W Bodyguard. Flawless functioning, and the slide locks back now 100% of the time.

March 11, 2019, 08:10 PM	#5
JERRYS. Senior Member Join Date: September 23, 2013 Location: Alabama Posts: 2,968	the G43 and G42 enjoyed the magguts design for several years now.

March 12, 2019, 09:28 AM	#6
Tactical Jackalope Senior Member Join Date: December 5, 2010 Location: Miami, Florida Posts: 6,429	And here I was, about to sell my Kahr K9. Many manufacturers make these for Glocks, Jerry. Taran Tactical and Hyve. But I did not know Magguts have been making them for Glocks all this time! Also, I am still selling the Kahr K9. Head to TFL gun show for any inquiries.

March 12, 2019, 10:26 AM	#8
Tactical Jackalope Senior Member Join Date: December 5, 2010 Location: Miami, Florida Posts: 6,429	Whoa! Wait a second. You're adding rounds with a flush magazine? That's some witchcraft right there.

March 12, 2019, 07:06 PM	#9
Carmady Senior Member Join Date: February 26, 2013 Location: on the lam Posts: 1,735	I have the MagGuts in my Gen 2 LCP, only fired three mags through it, but there were zero malfunctions. That makes the LCP 7+1 with a flat /flush floorplate. I'm also waiting for the Kahr 6-to-7 round 9mm MagGuts. I have an extra Wolff # 79301 mag spring and it's a little over twice as long as the 6-rd mag.

January 19, 2020, 06:35 PM	#11
Carl the Floor Walker member Join Date: June 3, 2017 Location: South Posts: 1,422	I have them in my Kahr CW380 and function flawlessly. I also have the Gallaway Plus 1 for many of my Kahr CM9 and function great. I like the metal follower of the Magguts.

January 20, 2020, 12:12 AM	#12
Dan-O Senior Member Join Date: August 3, 2011 Location: Northern Colorado Posts: 969	Magguts are on order