January 11, 2018, 06:58 PM | #1 |
Senior Member
Join Date: September 23, 2013
Location: Alabama
Posts: 2,968
|
got an I frame
Flat latch, model 30 no dash .32 Long, 3" nickeled (~80%?). haven't shot it yet. degreased, fondled, and new grips on it (cheesy plastics came with it).
I think it will be a good gun for my teenaged daughter. six shot center fire I think is better than her 8 shot rim fire. can't add pix for some reason. |
January 11, 2018, 09:46 PM | #2 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
IMHO, six rounds of .32 S&W Long is better than 8 rounds of .22 LR. Plus with the CF rounds, there is a lot less possibility of a misfire and you can go to a lighter trigger pull. (The minus side is that the CF rounds cost more, meaning, usually, less practice.)
Jim |
January 11, 2018, 09:46 PM | #3 |
Senior Member
Join Date: May 20, 2007
Posts: 2,437
|
I have 2 Regulation Police 'I' frames. Neat little pistols. I'm sure you and your daughter will enjoy yours. If you reload, you can shoot 32 S&W Long for about the same cost as cheap 22s. Keep working on those pictures. We want to see your new gun.
|
January 11, 2018, 10:15 PM | #4 |
Senior Member
Join Date: October 22, 2016
Posts: 3,879
|
The price of .32 S&W Long isn't that bad and for the distances that an I frame revolver is going to be shot, there's not going to need to be a lot of practice shooting done to become good enough for a defensive use.
The real reason to have an I frame .32 is the reliability, bigger bullet, and better trigger. The price and an extra 2 or 3 rounds of .22 doesn't make up for the heavy triggers and potential rimfire ignition failures. Then when it comes to .22 Magnum, there's no comparison. .32 > .22 Mag
__________________
"We always think there's gonna be more time... then it runs out."
|
January 12, 2018, 08:22 AM | #5 |
Senior Member
Join Date: October 17, 2014
Posts: 2,444
|
I have one too, in nickel finish, even. Even though it's a hundred years old, it functions just fine.
You made a good choice. I don't understand why anyone would choose 22 over 32 long for SD. Personally, I can barely tell the difference in the recoil. Many seem to think that there's nothing between 22 and 38. I truly can't understand that way of thinking. On the rare occasions I'm away from home, I leave a 32 revolver for my wife and daughter (in addition to the two large and protective dogs). |
January 12, 2018, 08:38 AM | #6 |
Senior Member
Join Date: August 12, 2009
Location: Athens, Georgia
Posts: 2,525
|
Congrats! .32 long is a fun cartridge to shoot and a six shot I frame is a nice little package. As ligonierbill points out, it can be very economical if you reload.
|
January 12, 2018, 09:17 AM | #7 | |
Senior Member
Join Date: October 28, 2006
Location: South Central Michigan...near
Posts: 6,501
|
Quote:
|
|
January 15, 2018, 08:00 AM | #8 |
Junior Member
Join Date: January 24, 2015
Posts: 14
|
I thought the Model 30 was a J-frame? I have a regulation police 4 inch made in 57 which is an I-frame and a 30-1 snubby from 68 and it is a J-frame. Would love to find a 3 inch and a 6 inch.
|
January 15, 2018, 08:18 AM | #9 |
Senior Member
Join Date: May 20, 2007
Posts: 2,437
|
I thought the same, but according to Wikipedia (always right, isn't it?) the Model 30 started as an 'I' frame with a round butt. Later 30s are indeed 'J' frames.
|
January 15, 2018, 09:30 AM | #10 |
Senior Member
Join Date: September 23, 2013
Location: Alabama
Posts: 2,968
|
it is a flat latch, 3", I frame, round butt, in nickel. I'm guessing the manufacture date to be late 50s.
Upload Errors 20180111_122918.jpg: Upload of file failed. doesn't say file is too large. just keeps giving this error message. |
January 15, 2018, 09:52 AM | #11 |
Senior Member
Join Date: July 14, 2008
Location: South Carolina
Posts: 2,918
|
Congrats on a fine little revolver, I do enjoy me some 32 long wadcutters. I can shoot them all day and the smile on my face is hard to remove. I found a love for the 32 cal weapons during the 22 shortage and am glad I came around, as a reloader I did not know how much fun I was missing. Hope you get the picture thing worked out, would love to see the new addition.
__________________
We know exactly where one cow with Mad-cow-disease is located, among the millions and millions of cows in America, but we haven't got a clue where thousands of illegal immigrants and terrorists are |
January 15, 2018, 01:11 PM | #12 |
Senior Member
Join Date: May 20, 2007
Posts: 2,437
|
You should be able to find an image converter program that will reduce the file size of your pictures. I use "Ic" Free Image Converter.
|
January 15, 2018, 01:22 PM | #13 |
Senior Member
Join Date: November 20, 2007
Posts: 438
|
model 30 no dash is an i frame....model 30-1 is a j frame
|
January 15, 2018, 09:17 PM | #14 |
Senior Member
Join Date: September 23, 2013
Location: Alabama
Posts: 2,968
|
I picked up a box of .32acp as a fall back until I can find some .32 Long locally.
|
January 15, 2018, 09:57 PM | #15 |
Senior Member
Join Date: May 20, 2007
Posts: 2,437
|
32 ACP is loaded to higher pressure than 32 S&W Long! I would not fire it from an I frame.
|
January 15, 2018, 10:41 PM | #16 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
The actual pressure figures are 15,000 psi for the .32 S&W Long and 20,500 for the .32 ACP. While percent increase is high, I would not expect problems with firing the latter in an S&W solid frame revolver. (S&W never chambered their break tops for the .32 S&W Long, only for the .32 S&W [Short]).
I would think the greater problem (if any) would be the smaller and thinner rim of the .32 ACP (.045" VS .055"), which can give ignition (excess headspace) problems and extraction problems in a revolver. Jim |
January 15, 2018, 10:58 PM | #17 |
Senior Member
Join Date: September 23, 2013
Location: Alabama
Posts: 2,968
|
I thought about the rim thickness. I'm going to use the dime test tomorrow to check firing pin protrusion.
|
January 15, 2018, 11:03 PM | #18 |
Senior Member
Join Date: October 22, 2016
Posts: 3,879
|
In case no one else says it, never shoot .32 ACP in any .32 top break revolver. Even max .32 S&W Long loads are too much for those top breaks.
__________________
"We always think there's gonna be more time... then it runs out."
|
January 16, 2018, 08:07 AM | #19 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
|
Technically, the early Model 30s are not I frames, they are Improved I frames.
The Improved I frame was slightly larger than the I frame in several critical dimensions, including frame window sizes, and also introduced the coil main spring. I THINK that the Model 30 continued to use the Improved I frame until sometime into the 1960s, when it was transitioned to the J frame. My Model 30 snub, dating to about 1972, is on the J frame.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
January 16, 2018, 05:55 PM | #20 |
Senior Member
Join Date: September 23, 2013
Location: Alabama
Posts: 2,968
|
i bought the only box of .32 Long at the time i bought the gun, today I picked up a box of wwb .32acp as a fall back until I can get some regular ammo.
|
February 7, 2018, 12:53 PM | #21 |
Senior Member
Join Date: September 23, 2013
Location: Alabama
Posts: 2,968
|
pix added...
https://i.imgur.com/f8xhCUJ.jpg https://i.imgur.com/2x539wz.jpg https://i.imgur.com/kEk8jCD.jpg Last edited by JERRYS.; February 7, 2018 at 06:56 PM. |
February 7, 2018, 07:51 PM | #22 |
Senior Member
Join Date: September 12, 2015
Location: Issaquah WA. Its a dry rain.
Posts: 1,774
|
Nice! I just ran into the blued version of this down at the local shop, 90+% condition. I woulda jumped on it but I JUST bought a rifle.
Enjoy it!
__________________
Just shoot the damn thing. |
Thread Tools | Search this Thread |
|
|